PT65101L254 by Apem Components | Switches

Image shown is a representation only.

Manufacturer	Apem Components
Manufacturer's Part Number	PT65101L254
Description	ROTARY CODED SWITCH; Mounting Feature: THROUGH HOLE-RIGHT ANGLE; Switch Function: BINARY CODED DECIMAL; Type (Actuator): SCREW DRIVER; Contact Function: ON-OFF; Solderability: WAVE;
Datasheet	PT65101L254 Datasheet

NAME	DESCRIPTION
Maximum DC Contact Current:	.4 A
No. of Positions:	10
Center Contact Plating:	GOLD OVER NICKEL
Center Contact Material:	PHOSPHOR BRONZE
Length (Bushing):	0 inch
Type (Actuator):	SCREW DRIVER
Solderability:	WAVE
Terminal Finish:	Matte Tin (Sn)
Switch Action:	LATCHED
Terminal Material:	BRASS
Termination Type:	SOLDER
Electrical Life:	10000 Cycle(s)
Maximum Operating Temperature:	70 Cel
Material (Actuator):	NYLON
Contact Resistance:	80 mohm
Insulation Resistance:	100000000 ohm
End Contact Material:	PHOSPHOR BRONZE
No. of Switch Sections:	1
Maximum DC Contact Voltage:	24 V
DC Maximum Rating R Load (Contact):	.4A@24VDC
Contact Function:	ON-OFF
PCB Hole Count:	6
DC Maximum Power Rating R Load (Contact):	1.5VA@24VDC
Packing Method:	TUBE
Switch Type:	ROTARY CODED SWITCH
Sealing:	MOLDED
Indexing Angle:	36 deg
JESD-609 Code:	e3
Minimum Operating Temperature:	-20 Cel
Mounting Feature:	THROUGH HOLE-RIGHT ANGLE
Body Width:	6.5 inch
Switch Function:	BINARY CODED DECIMAL
Contact Timing:	BREAK-BEFORE-MAKE
Length (Actuator):	0 inch
End Contact Plating:	GOLD OVER NICKEL
Insulator Material:	THERMOPLASTIC
Body Height:	10 mm
Additional Features:	O-RING Si RUBBER ACTUATOR SEAL
Body Length/Diameter:	10 mm
Washability:	SOLVENT

Popular Products

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Package Shape: RECTANGULAR; Minimum Input-Output Voltage Differential: 3 V;

1N4148WT-7 by Diodes Inc. is a fast recovery rectifier diode with a max reverse recovery time of 0.004 us and a max forward voltage of 1.25 V. It has a package style of small outline, making it suitable for surface mount applications where high-speed switching is required at temperatures ranging from -65 to 150 °C.

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

MMBT3904LT1G by Onsemi is a NPN BJT with max. collector-emitter voltage of 40V, hFE of 30, and fT of 300MHz. Ideal for small signal applications in electronics due to its compact size, high transition frequency, and low power dissipation capabilities.

RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Operating Temperature: 200 Cel; Config: SINGLE; Terminal Finish: Tin/Lead (Sn/Pb);

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Other Interface ICs; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 14; Package Code: DFP; Package Shape: SQUARE;

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; Maximum Time At Peak Reflow Temperature (s): 10;