WAVE Rotary Switches 21

Reset All

Part	Manufacturer	Switch Type	Mounting Feature	Switch Function	Type (Actuator)	Contact Function	Solderability	AC Maximum Rating R Load (Contact)	Center Contact Plating	Color (Actuator)	Housing Material	Dielectric Withstand Volts (V)	Terminal Material	Electrical Life	DC Maximum Power Rating R Load (Contact)	Insulation Resistance	Packing Method	Body Length/Diameter	Body Width	Length (Bushing)	Sealing	No. of Switch Sections	Contact Timing	Insulator Material	End Contact Plating	Body Height	DC Maximum Rating R Load (Contact)	Washability	Maximum Operating Temperature	Maximum AC Contact Current	Center Contact Material	Minimum Operating Temperature	Length (Actuator)	Terminal Finish	Switch Action	Maximum DC Contact Current	Termination Type	Manufacturer Series	Contact Resistance	Diameter (Bushing)	End Contact Material	PCB Hole Count	No. of Positions	Maximum DC Contact Voltage	Additional Features	Maximum AC Contact Voltage	JESD-609 Code	Indexing Angle	Type (Bushing)	Terminal Length	Material (Actuator)
PT65101L254	Apem Components	ROTARY CODED SWITCH	THROUGH HOLE-RIGHT ANGLE	BINARY CODED DECIMAL	SCREW DRIVER	ON-OFF	WAVE		GOLD OVER NICKEL				BRASS	10000 Cycle(s)	1.5VA@24VDC	100000000 ohm	TUBE	10 mm	6.5 inch	0 inch	MOLDED	1	BREAK-BEFORE-MAKE	THERMOPLASTIC	GOLD OVER NICKEL	10 mm	.4A@24VDC	SOLVENT	70 Cel		PHOSPHOR BRONZE	-20 Cel	0 inch	Matte Tin (Sn)	LATCHED	.4 A	SOLDER		80 mohm		PHOSPHOR BRONZE	6	10	24 V	O-RING Si RUBBER ACTUATOR SEAL		e3	36 deg			NYLON
PT65103	Apem Components	ROTARY CODED SWITCH	THROUGH HOLE-STRAIGHT	BINARY CODED HEXADECIMAL	SCREW DRIVER	ON-OFF	WAVE		GOLD OVER NICKEL				BRASS	10000 Cycle(s)	1.5VA@24VDC	100000000 ohm	TUBE	10 mm	10 inch	0 inch	MOLDED	1	BREAK-BEFORE-MAKE	THERMOPLASTIC	GOLD OVER NICKEL	6.5 mm	.4A@24VDC	SOLVENT	70 Cel		PHOSPHOR BRONZE	-20 Cel	0 inch	Tin (Sn)	LATCHED	.4 A	SOLDER		80 mohm		PHOSPHOR BRONZE	6	16	24 V	O-RING Si RUBBER ACTUATOR SEAL		e3	22.5 deg		.15 inch	NYLON
RTE1002G14	C & K Components	ROTARY CODED SWITCH	SURFACE MOUNT-STRAIGHT	BINARY CODED DECIMAL	ROTARY SHAFT		WAVE		GOLD		BRASS	300VRMS				10000000000 ohm								POLYPHENYLENE SULPHIDE	GOLD		0.1A@30VDC		85 Cel		BRONZE	-25 Cel		TIN		.1 A	SOLDER		100 mohm		BRASS		10	30 V			e3
PT65103L254	Apem Components	ROTARY CODED SWITCH	THROUGH HOLE-RIGHT ANGLE	HEXADECIMAL	SCREW DRIVER	ON-OFF	WAVE		GOLD OVER NICKEL				BRASS	10000 Cycle(s)	1.5VA@24VDC	100000000 ohm	TUBE	10 mm	6.5 inch	0 inch	MOLDED	1	BREAK-BEFORE-MAKE	THERMOPLASTIC	GOLD OVER NICKEL	10 mm	.4A@24VDC	SOLVENT	70 Cel		PHOSPHOR BRONZE	-20 Cel	0 inch	Matte Tin (Sn)	LATCHED	.4 A	SOLDER	PT65	80 mohm		PHOSPHOR BRONZE	6	16	24 V	O-RING Si RUBBER ACTUATOR SEAL		e3	22.5 deg			NYLON
RTE1002V14	C & K Components	ROTARY CODED SWITCH	THROUGH HOLE-RIGHT ANGLE	BINARY CODED DECIMAL	ROTARY SHAFT		WAVE		GOLD		BRASS	300VRMS				10000000000 ohm								POLYPHENYLENE SULPHIDE	GOLD		0.1A@30VDC		85 Cel		BRONZE	-25 Cel		TIN		.1 A	SOLDER		100 mohm		BRASS		10	30 V			e3
DRR3016	Nidec Copal Electronics	ROTARY CODED SWITCH	THROUGH HOLE-RIGHT ANGLE	HEXADECIMAL	ROTARY SCREW	BINARY CODED	WAVE		GOLD	YELLOW		250VAC	BRASS	20000 Cycle(s)		1000000000 ohm		10.0076 mm	10.0076 inch							6.9088 mm	0.03A@15VDC		85 Cel		COPPER ALLOY	-40 Cel			CIRCULAR	.03 A	SOLDER		100 mohm			5	16	15 V						.138 inch
PT65101	Apem Components	ROTARY CODED SWITCH	THROUGH HOLE-STRAIGHT	BINARY CODED DECIMAL	SCREW DRIVER	ON-OFF	WAVE		GOLD OVER NICKEL				BRASS	10000 Cycle(s)	1.5VA@24VDC	100000000 ohm	TUBE	10 mm	10 inch	0 inch	MOLDED	1	BREAK-BEFORE-MAKE	THERMOPLASTIC	GOLD OVER NICKEL	6.5 mm	.4A@24VDC	SOLVENT	70 Cel		PHOSPHOR BRONZE	-20 Cel	0 inch	Tin (Sn)	LATCHED	.4 A	SOLDER	PT65	80 mohm		PHOSPHOR BRONZE	6	10	24 V	O-RING Si RUBBER ACTUATOR SEAL		e3	36 deg		.15 inch	NYLON
MRB24B	Nkk Switches	ROTARY SWITCH	THROUGH HOLE-STRAIGHT	DP3T	ROTARY	ON-ON-ON	WAVE		GOLD			500VAC	BRASS	10000 Cycle(s)	0.4VA@28VDC	100000000 ohm		15.748 mm	14.5034 inch	.276 inch			BREAK-BEFORE-MAKE		GOLD	10.9982 mm			70 Cel		BERYLLIUM COPPER	-10 Cel	.394 inch	TIN	CIRCULAR		SOLDER		80 mohm		COPPER	12					e3	45 deg	M6P0.75	.138 inch	BRASS
MRB24H	Nkk Switches	ROTARY SWITCH	THROUGH HOLE-RIGHT ANGLE	DP3T	ROTARY	ON-ON-ON	WAVE		GOLD			500VAC	BRASS	10000 Cycle(s)	0.4VA@28VDC	100000000 ohm		15.748 mm	16.3068 inch	.276 inch			BREAK-BEFORE-MAKE		GOLD	15.0876 mm			70 Cel		BERYLLIUM COPPER	-10 Cel	.394 inch	TIN	CIRCULAR		SOLDER		80 mohm		COPPER	12					e3	45 deg	M6P0.75	.138 inch	BRASS
PT65503L254	Apem Components	ROTARY CODED SWITCH	THROUGH HOLE-RIGHT ANGLE	HEXADECIMAL	SEGMENT WHEEL	ON-OFF	WAVE		GOLD OVER NICKEL				BRASS	10000 Cycle(s)	1.5VA@24VDC	100000000 ohm	TRAY	10 mm	6.5 inch	0 inch	MOLDED	1	BREAK-BEFORE-MAKE	THERMOPLASTIC	GOLD OVER NICKEL	10 mm	.4A@24VDC	SOLVENT	70 Cel		PHOSPHOR BRONZE	-20 Cel	.173 inch	Matte Tin (Sn)	LATCHED	.4 A	SOLDER	PT65	80 mohm		PHOSPHOR BRONZE	6	16	24 V	O-RING Si RUBBER ACTUATOR SEAL		e3	22.5 deg			NYLON
PT65301	Apem Components	ROTARY CODED SWITCH	THROUGH HOLE-STRAIGHT	BINARY CODED DECIMAL	SPINDLE	ON-OFF	WAVE		GOLD OVER NICKEL				BRASS	10000 Cycle(s)	1.5VA@24VDC	100000000 ohm	TRAY	10 mm	10 inch	0 inch	MOLDED	1	BREAK-BEFORE-MAKE	THERMOPLASTIC	GOLD OVER NICKEL	6.5 mm	.4A@24VDC	SOLVENT	70 Cel		PHOSPHOR BRONZE	-20 Cel	.287 inch	Matte Tin (Sn)	LATCHED	.4 A	SOLDER	PT65	80 mohm		PHOSPHOR BRONZE	6	10	24 V	O-RING Si RUBBER ACTUATOR SEAL		e3	36 deg		.15 inch	NYLON
221AMC10R	Cts	ROTARY SWITCH	SURFACE MOUNT-STRAIGHT	SP10T	ROTARY	BINARY CODED	WAVE		GOLD			350VAC		20000 Cycle(s)		1000000000 ohm	TR	.39 mm	.38 inch						GOLD	.2 mm			85 Cel		BERYLLIUM COPPER	-40 Cel	.27 inch		CIRCULAR	.1 A	SOLDER		80 mohm		BERYLLIUM COPPER		10	50 V
MRF112	Nkk Switches	ROTARY SWITCH	THROUGH HOLE-STRAIGHT	SP12T	ROTARY SHAFT	ON-OFF	WAVE		GOLD		ZINC ALLOY	500VAC	PHOSPHOR BRONZE	10000 Cycle(s)	0.4VA@28VDC	100000000 ohm		13.9954 mm		0 inch			BREAK-BEFORE-MAKE	GLASS FILLED POLYAMIDE	GOLD	11.7094 mm			70 Cel		PHOSPHOR BRONZE	-10 Cel	.039 inch		CIRCULAR		SOLDER	MR	50 mohm		PHOSPHOR BRONZE	13	12					15 deg		.138 inch	BRASS
MRA112	Nkk Switches	ROTARY SWITCH	THROUGH HOLE-STRAIGHT	SP12T	ROTARY SHAFT	ON-OFF	WAVE	0.25A@125VAC	SILVER	BLACK	ZINC ALLOY	1000VAC	BRASS	10000 Cycle(s)		100000000 ohm		16.002 mm		.197 inch			BREAK-BEFORE-MAKE	DIALLYL PHTHALATE	SILVER	45.5168 mm	0.25A@48VDC		70 Cel	.25 A	COPPER ALLOY	-10 Cel	.512 inch		CIRCULAR	.25 A	SOLDER	MR	10 mohm	.236 inch	BRASS	13	12	48 V		125 V		30 deg	M6P0.75	.394 inch	POLYACETAL
MRB14B	Nkk Switches	ROTARY SWITCH	THROUGH HOLE-STRAIGHT	SP3T	ROTARY	ON-ON-ON	WAVE		GOLD			500VAC	BRASS	10000 Cycle(s)	0.4VA@28VDC	100000000 ohm		15.748 mm	14.5034 inch	.276 inch			BREAK-BEFORE-MAKE		GOLD	10.9982 mm			70 Cel		BERYLLIUM COPPER	-10 Cel	.394 inch	TIN	CIRCULAR		SOLDER		80 mohm		COPPER	8					e3	45 deg	M6P0.75	.138 inch	BRASS
PT65503	Apem Components	ROTARY CODED SWITCH	THROUGH HOLE-STRAIGHT	HEXADECIMAL	SEGMENT WHEEL	ON-OFF	WAVE		GOLD OVER NICKEL				BRASS	10000 Cycle(s)	1.5VA@24VDC	100000000 ohm	TRAY	10 mm	10 inch	0 inch	MOLDED	1	BREAK-BEFORE-MAKE	THERMOPLASTIC	GOLD OVER NICKEL	6.5 mm	.4A@24VDC	SOLVENT	70 Cel		PHOSPHOR BRONZE	-20 Cel	.173 inch	TIN	LATCHED	.4 A	SOLDER	PT65	80 mohm		PHOSPHOR BRONZE	6	16	24 V	O-RING Si RUBBER ACTUATOR SEAL		e3	22.5 deg		.15 inch	NYLON
PT65112	Apem Components	ROTARY CODED SWITCH	THROUGH HOLE-STRAIGHT	BINARY CODED DECIMAL	ARROW SHAPED SLOT	ON-OFF	WAVE		GOLD OVER NICKEL				BRASS	10000 Cycle(s)	1.5VA@24VDC	100000000 ohm		10 mm	10 inch	0 inch	MOLDED	1	BREAK-BEFORE-MAKE	THERMOPLASTIC	GOLD OVER NICKEL	6.5 mm	.4A@24VDC	SOLVENT	70 Cel		PHOSPHOR BRONZE	-20 Cel	0 inch	Gold (Au) - with Nickel (Ni) barrier	LATCHED	.4 A	SOLDER	PT65	80 mohm		PHOSPHOR BRONZE	6	4	24 V	O-RING Si RUBBER ACTUATOR SEAL		e4	90 deg		.15 inch	NYLON
PT65112L254	Apem Components	ROTARY CODED SWITCH	THROUGH HOLE-RIGHT ANGLE	BINARY CODED DECIMAL	ARROW SHAPED SLOT	ON-OFF	WAVE		GOLD OVER NICKEL				BRASS	10000 Cycle(s)	1.5VA@24VDC	100000000 ohm		10 mm	6.8 inch	0 inch	MOLDED	1	BREAK-BEFORE-MAKE	THERMOPLASTIC	GOLD OVER NICKEL	10 mm	.4A@24VDC	SOLVENT	70 Cel		PHOSPHOR BRONZE	-20 Cel	0 inch	Gold (Au) - with Nickel (Ni) barrier	LATCHED	.4 A	SOLDER	PT65	80 mohm		PHOSPHOR BRONZE	6	4	24 V	O-RING Si RUBBER ACTUATOR SEAL		e4	90 deg			NYLON
PT65112L508	Apem Components	ROTARY CODED SWITCH	THROUGH HOLE-RIGHT ANGLE	BINARY CODED DECIMAL	ARROW SHAPED SLOT	ON-OFF	WAVE		GOLD OVER NICKEL				BRASS	10000 Cycle(s)	1.5VA@24VDC	100000000 ohm		10 mm	6.8 inch	0 inch	MOLDED	1	BREAK-BEFORE-MAKE	THERMOPLASTIC	GOLD OVER NICKEL	10 mm	.4A@24VDC	SOLVENT	70 Cel		PHOSPHOR BRONZE	-20 Cel	0 inch	Gold (Au)	LATCHED	.4 A	SOLDER		80 mohm		PHOSPHOR BRONZE	6	4	24 V	O-RING Si RUBBER ACTUATOR SEAL		e4	90 deg			NYLON
PT65503L508	Apem Components	ROTARY CODED SWITCH	THROUGH HOLE-RIGHT ANGLE	HEXADECIMAL	SEGMENT WHEEL	ON-OFF	WAVE		GOLD OVER NICKEL				BRASS	10000 Cycle(s)	1.5VA@24VDC	100000000 ohm	TRAY	10 mm	6.5 inch	0 inch	MOLDED	1	BREAK-BEFORE-MAKE	THERMOPLASTIC	GOLD OVER NICKEL	10 mm	.4A@24VDC	SOLVENT	70 Cel		PHOSPHOR BRONZE	-20 Cel	.173 inch	Matte Tin (Sn)	LATCHED	.4 A	SOLDER	PT65	80 mohm		PHOSPHOR BRONZE	6	16	24 V	O-RING Si RUBBER ACTUATOR SEAL		e3	22.5 deg			NYLON
7829S-1-023LF	Bourns	ROTARY SWITCH	PANEL MOUNT	SPDT	SLOT TYPE		WAVE	.1A@16VAC						2000 Cycle(s)		10000000 ohm	TUBE	6.6 mm	6.1 inch			1				8.38 mm	.1A@16VDC		125 Cel	.1 A		-55 Cel		TIN	LATCHED	.1 A	WIRE		2 mohm				2	16 V		16 V	e3			.305 inch

Rotary Switches

Rotary switches are electronic switches that are activated by rotating a dial or knob. They are commonly used in a variety of applications, such as audio equipment, industrial control systems, and consumer electronics.

Rotary switches typically consist of a housing, a dial or knob, and a set of electrical contacts. When the dial or knob is rotated, it completes a circuit between the contacts, allowing electrical current to flow through the switch. Some rotary switches also include detents or stops that provide tactile feedback as the dial is rotated.

Rotary switches come in different configurations, including single-pole, double-pole, and multi-pole switches. They also come in different contact arrangements, such as make-before-break, break-before-make, and center-off switches.

Rotary switches offer several advantages over other types of switches. They provide a simple and intuitive means of controlling circuits, and they offer tactile feedback that can help to ensure reliable operation. They are also highly durable and can withstand frequent use and harsh environments.