Image shown is a representation only.
| Manufacturer | Apem Components |
|---|---|
| Manufacturer's Part Number | PT65503L508 |
| Description | ROTARY CODED SWITCH; Mounting Feature: THROUGH HOLE-RIGHT ANGLE; Switch Function: HEXADECIMAL; Type (Actuator): SEGMENT WHEEL; Contact Function: ON-OFF; Solderability: WAVE; |
| Datasheet | PT65503L508 Datasheet |
| NAME | DESCRIPTION |
|---|---|
| Maximum DC Contact Current: | .4 A |
| No. of Positions: | 16 |
| Center Contact Plating: | GOLD OVER NICKEL |
| Center Contact Material: | PHOSPHOR BRONZE |
| Length (Bushing): | 0 inch |
| Type (Actuator): | SEGMENT WHEEL |
| Solderability: | WAVE |
| Terminal Finish: | Matte Tin (Sn) |
| Switch Action: | LATCHED |
| Terminal Material: | BRASS |
| Termination Type: | SOLDER |
| Electrical Life: | 10000 Cycle(s) |
| Maximum Operating Temperature: | 70 Cel |
| Manufacturer Series: | PT65 |
| Material (Actuator): | NYLON |
| Contact Resistance: | 80 mohm |
| Insulation Resistance: | 100000000 ohm |
| End Contact Material: | PHOSPHOR BRONZE |
| No. of Switch Sections: | 1 |
| Maximum DC Contact Voltage: | 24 V |
| DC Maximum Rating R Load (Contact): | .4A@24VDC |
| Contact Function: | ON-OFF |
| PCB Hole Count: | 6 |
| DC Maximum Power Rating R Load (Contact): | 1.5VA@24VDC |
| Packing Method: | TRAY |
| Switch Type: | ROTARY CODED SWITCH |
| Sealing: | MOLDED |
| Indexing Angle: | 22.5 deg |
| JESD-609 Code: | e3 |
| Minimum Operating Temperature: | -20 Cel |
| Mounting Feature: | THROUGH HOLE-RIGHT ANGLE |
| Body Width: | 6.5 inch |
| Switch Function: | HEXADECIMAL |
| Contact Timing: | BREAK-BEFORE-MAKE |
| Length (Actuator): | .173 inch |
| End Contact Plating: | GOLD OVER NICKEL |
| Insulator Material: | THERMOPLASTIC |
| Body Height: | 10 mm |
| Additional Features: | O-RING Si RUBBER ACTUATOR SEAL |
| Body Length/Diameter: | 10 mm |
| Washability: | SOLVENT |
