Image shown is a representation only.
| Manufacturer | Nkk Switches |
|---|---|
| Manufacturer's Part Number | MRF112 |
| Description | ROTARY SWITCH; Mounting Feature: THROUGH HOLE-STRAIGHT; Switch Function: SP12T; Type (Actuator): ROTARY SHAFT; Contact Function: ON-OFF; Solderability: WAVE; |
| Datasheet | MRF112 Datasheet |
| NAME | DESCRIPTION |
|---|---|
| No. of Positions: | 12 |
| Center Contact Plating: | GOLD |
| Center Contact Material: | PHOSPHOR BRONZE |
| Length (Bushing): | 0 inch |
| Housing Material: | ZINC ALLOY |
| Type (Actuator): | ROTARY SHAFT |
| Solderability: | WAVE |
| Switch Action: | CIRCULAR |
| Terminal Material: | PHOSPHOR BRONZE |
| Termination Type: | SOLDER |
| Electrical Life: | 10000 Cycle(s) |
| Maximum Operating Temperature: | 70 Cel |
| Manufacturer Series: | MR |
| Material (Actuator): | BRASS |
| Contact Resistance: | 50 mohm |
| Insulation Resistance: | 100000000 ohm |
| End Contact Material: | PHOSPHOR BRONZE |
| Other Names: |
MR-F113 MRF112-RO MRF112-RO-ND 360-2370 |
| Dielectric Withstand Volts (V): | 500VAC |
| Contact Function: | ON-OFF |
| PCB Hole Count: | 13 |
| DC Maximum Power Rating R Load (Contact): | 0.4VA@28VDC |
| Switch Type: | ROTARY SWITCH |
| Indexing Angle: | 15 deg |
| Minimum Operating Temperature: | -10 Cel |
| Mounting Feature: | THROUGH HOLE-STRAIGHT |
| Switch Function: | SP12T |
| Contact Timing: | BREAK-BEFORE-MAKE |
| Terminal Length: | .138 inch |
| Length (Actuator): | .039 inch |
| End Contact Plating: | GOLD |
| Insulator Material: | GLASS FILLED POLYAMIDE |
| Body Height: | 11.7094 mm |
| Body Length/Diameter: | 13.9954 mm |
