Image shown is a representation only.
| Manufacturer | Apem Components |
|---|---|
| Manufacturer's Part Number | SLB1570R |
| Description | SLIDE SWITCH; Mounting Feature: THROUGH HOLE-RIGHT ANGLE; Switch Function: SP5T; Type (Actuator): SLIDE; Solderability: WAVE; Dielectric Withstand Volts (V): 500VRMS; |
| Datasheet | SLB1570R Datasheet |
| NAME | DESCRIPTION |
|---|---|
| Maximum DC Contact Current: | .3 A |
| No. of Positions: | 5 |
| Center Contact Plating: | SILVER |
| Housing Material: | STEEL |
| Type (Actuator): | SLIDE |
| Maximum AC Contact Voltage: | 125 V |
| Solderability: | WAVE |
| Terminal Finish: | Silver (Ag) |
| Switch Action: | LATCHED |
| Termination Type: | SOLDER |
| Electrical Life: | 10000 Cycle(s) |
| Maximum Operating Temperature: | 85 Cel |
| Material (Actuator): | THERMOPLASTIC |
| Contact Resistance: | 20 mohm |
| Insulation Resistance: | 100000000 ohm |
| Maximum AC Contact Current: | .3 A |
| Angle (Actuator): | 0 deg |
| Other Names: |
679-4086 SLB1570R-ND |
| Maximum DC Contact Voltage: | 30 V |
| DC Maximum Rating R Load (Contact): | .3A@30VDC |
| Dielectric Withstand Volts (V): | 500VRMS |
| PCB Hole Count: | 9 |
| Maximum Operating Force: | 3.14 N |
| Switch Type: | SLIDE SWITCH |
| AC Maximum Rating R Load (Contact): | .3A@125VAC |
| Sealing: | EPOXY TERMINAL SEALED |
| JESD-609 Code: | e4 |
| Minimum Operating Temperature: | -20 Cel |
| Mounting Feature: | THROUGH HOLE-RIGHT ANGLE |
| Body Width: | 7.5 inch |
| Switch Function: | SP5T |
| Length (Actuator): | .197 inch |
| End Contact Plating: | SILVER |
| Insulator Material: | PHENOLIC |
| Body Height: | 5 mm |
| Body Length/Diameter: | 22 mm |
| Washability: | SOLVENT |
