1101-M2S3CBE2 by Lamb Industries | Switches

Image shown is a representation only.

Manufacturer	Lamb Industries
Manufacturer's Part Number	1101-M2S3CBE2
Description	SLIDE SWITCH; Mounting Feature: THROUGH HOLE-STRAIGHT; Switch Function: SPST; Type (Actuator): SLIDE; Contact Function: ON-ON; Minimum Operating Temperature: -30 Cel;
Datasheet	1101-M2S3CBE2 Datasheet

NAME	DESCRIPTION
No. of Positions:	3
Center Contact Plating:	GOLD OVER NICKEL
Center Contact Material:	COPPER
Type (Actuator):	SLIDE
Terminal Finish:	GOLD/NICKEL
Switch Action:	MAINTAINED
Terminal Material:	COPPER ALLOY
Termination Type:	SOLDER
Electrical Life:	50000 Cycle(s)
Maximum Operating Temperature:	85 Cel
Manufacturer Series:	1101
Material (Actuator):	NYLON
Contact Resistance:	10 mohm
Insulation Resistance:	1000000000 ohm
End Contact Material:	COPPER
Angle (Actuator):	0 deg
Dielectric Withstand Volts (V):	1500VAC
Contact Function:	ON-ON
PCB Hole Count:	3
DC Maximum Power Rating R Load (Contact):	0.4VA@20VDC
Switch Type:	SLIDE SWITCH
Sealing:	EPOXY
Minimum Operating Temperature:	-30 Cel
Mounting Feature:	THROUGH HOLE-STRAIGHT
Body Width:	6.096 inch
Switch Function:	SPST
Terminal Length:	.265 inch
Length (Actuator):	.201 inch
End Contact Plating:	GOLD OVER NICKEL
Insulator Material:	DIALLYL PHTHALATE
Body Height:	6.2992 mm
Additional Features:	APPROVALS: UL,CSA
Body Length/Diameter:	12.7 mm

Popular Products

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JESD-30 Code: O-MBCY-W3;

MBR1560CT by General Instrument is a common cathode rectifier diode with a max forward voltage of 0.75V and max output current of 15A. It is used for efficiency applications, has a package shape of rectangular, and can operate in temperatures ranging from -65 to 150 °C.

The Yageo RC0402FR-071KL is a fixed resistor with a resistance of 1000 ohm and a tolerance of 1%. It is suitable for surface mount applications and has a max operating temperature of 155 °C.

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.6 W; Transistor Application: SWITCHING; Maximum Drain Current (ID): 3 A;

ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; No. of Outputs: 1; Package Equivalence Code: SIP3,.1TB;

1N4148WT by Onsemi is a single rectifier diode with a max output current of 0.3A and forward voltage of 0.72V. It has a small outline package style, matte tin terminal finish, and operates at temperatures up to 150°C. Ideal for applications requiring fast reverse recovery time such as power supplies and signal demodulation circuits.

OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.