Image shown is a representation only.
| Manufacturer | C & K Components |
|---|---|
| Manufacturer's Part Number | ITS50FR1ST |
| Description | KEYPAD SWITCH; Mounting Feature: THROUGH HOLE-RIGHT ANGLE; Switch Function: SPST; Solderability: WAVE; End Contact Material: BRASS; Material (Actuator): POLYAMIDE; |
| Datasheet | ITS50FR1ST Datasheet |
| NAME | DESCRIPTION |
|---|---|
| Maximum DC Contact Current: | .05 A |
| Center Contact Plating: | SILVER |
| Maximum Contact Bounce Time: | 10 ms |
| Center Contact Material: | BRASS |
| Housing Material: | POLYAMIDE |
| Solderability: | WAVE |
| Terminal Finish: | SILVER |
| Switch Action: | MOMENTARY-TACTILE |
| Terminal Material: | BRASS |
| Termination Type: | SOLDER |
| Electrical Life: | 50000 Cycle(s) |
| Illumination: | LED |
| Maximum Operating Temperature: | 70 Cel |
| Material (Actuator): | POLYAMIDE |
| Contact Resistance: | 100 mohm |
| Insulation Resistance: | 100000000 ohm |
| End Contact Material: | BRASS |
| Other Names: |
*ITS50FR1ST 2266-ITS50FR1ST CKN10454 |
| Maximum DC Contact Voltage: | 12 V |
| DC Maximum Rating R Load (Contact): | 0.05A@12VDC |
| Dielectric Withstand Volts (V): | 250VAC |
| PCB Hole Count: | 6 |
| Maximum Operating Force: | 2.06 N |
| Packing Method: | TRAY |
| Switch Type: | KEYPAD SWITCH |
| JESD-609 Code: | e4 |
| Minimum Operating Temperature: | -25 Cel |
| Mounting Feature: | THROUGH HOLE-RIGHT ANGLE |
| Body Width: | 6.8 inch |
| Switch Function: | SPST |
| Circuit Config: | 1X1 |
| Terminal Length: | .114 inch |
| Length (Actuator): | .104 inch |
| End Contact Plating: | SILVER |
| Insulator Material: | POLYAMIDE |
| Body Height: | 8.3 mm |
| Body Length/Diameter: | 7 mm |
| No. of Switches: | 1 |
