Image shown is a representation only.
| Manufacturer | C & K Components |
|---|---|
| Manufacturer's Part Number | KT11P2SA2M35LFG |
| Description | KEYPAD SWITCH; Mounting Feature: SURFACE MOUNT-RIGHT ANGLE; Switch Function: SPST; Type (Actuator): HARD TYPE; Solderability: MIL-STD; JESD-609 Code: e4; |
| Datasheet | KT11P2SA2M35LFG Datasheet |
| NAME | DESCRIPTION |
|---|---|
| Maximum DC Contact Current: | .031 A |
| Center Contact Plating: | GOLD |
| Type (Actuator): | HARD TYPE |
| Maximum AC Contact Voltage: | 32 V |
| Solderability: | MIL-STD |
| Terminal Finish: | GOLD |
| Switch Action: | MOMENTARY-TACTILE |
| Termination Type: | SOLDER |
| Electrical Life: | 100000 Cycle(s) |
| Maximum Operating Temperature: | 125 Cel |
| Contact Resistance: | 50 mohm |
| Insulation Resistance: | 1000000000 ohm |
| Maximum AC Contact Current: | .031 A |
| Maximum DC Contact Voltage: | 32 V |
| DC Maximum Rating R Load (Contact): | .031A@32VDC |
| Dielectric Withstand Volts (V): | 250VRMS |
| DC Maximum Power Rating R Load (Contact): | 1VA@32VDC |
| Packing Method: | TR |
| Switch Type: | KEYPAD SWITCH |
| AC Maximum Rating R Load (Contact): | 0.031A@32VAC |
| Sealing: | IP57 |
| JESD-609 Code: | e4 |
| Minimum Operating Temperature: | -40 Cel |
| Mounting Feature: | SURFACE MOUNT-RIGHT ANGLE |
| Body Width: | 7.11 inch |
| Switch Function: | SPST |
| Contact Timing: | MAKE-BEFORE-BREAK |
| Circuit Config: | 1X1 |
| Length (Actuator): | .093 inch |
| End Contact Plating: | GOLD |
| Body Height: | 4.38 mm |
| Additional Features: | ROHS COMPLIANT |
| Body Length/Diameter: | 6.29 mm |
| No. of Switches: | 1 |
| AC Maximum Power Rating R Load (Contact): | 1VA@32VAC |
