PTS525SK10SMTRLFS by C & K Components | Switches

Image shown is a representation only.

Manufacturer	C & K Components
Manufacturer's Part Number	PTS525SK10SMTRLFS
Description	KEYPAD SWITCH; Mounting Feature: SURFACE MOUNT-STRAIGHT; Switch Function: SPST; Contact Function: OFF-(ON); Solderability: REFLOW; Termination Type: SOLDER;
Datasheet	PTS525SK10SMTRLFS Datasheet

NAME	DESCRIPTION
Maximum DC Contact Current:	.05 A
Center Contact Plating:	SILVER
Center Contact Material:	PHOSPHOR BRONZE
Solderability:	REFLOW
Terminal Finish:	Silver (Ag)
Actuator Travel (mm):	0.3
Switch Action:	MOMENTARY-TACTILE
Terminal Material:	BRASS
Termination Type:	SOLDER
Electrical Life:	100000 Cycle(s)
Maximum Operating Temperature:	60 Cel
Contact Resistance:	100 mohm
Insulation Resistance:	100000000000 ohm
End Contact Material:	BRASS
Maximum DC Contact Voltage:	12 V
DC Maximum Rating R Load (Contact):	.05A@12VDC
Dielectric Withstand Volts (V):	250VAC
Contact Function:	OFF-(ON)
Maximum Operating Force:	2.55 N
Packing Method:	TAPE AND REEL
Switch Type:	KEYPAD SWITCH
Sealing:	MOLDED
JESD-609 Code:	e4
Minimum Operating Temperature:	-40 Cel
Mounting Feature:	SURFACE MOUNT-STRAIGHT
Body Width:	5.25 inch
Switch Function:	SPST
Circuit Config:	1X1
Length (Actuator):	.012 inch
End Contact Plating:	SILVER
Body Height:	.8 mm
Additional Features:	ULTRA LOW PROFILE
Body Length/Diameter:	5.25 mm
No. of Switches:	1

Popular Products

KEMET C1206C104M5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±20% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance across temperatures.

ST3485EBDR by STMicroelectronics is a Line Driver & Receiver with 3.3V power supply, EIA-422/EIA-485 interface standard, and 30ns max transmit delay. It is ideal for industrial applications requiring differential output and operates in temperatures ranging from -40 to 85°C.

D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; IEC Conformity: NO; Mixed Contacts: NO; Empty Shell: NO;

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; No. of Elements: 1; Terminal Form: GULL WING;

LAN8720A-CP-TR by Microchip: Ethernet transceiver with 100 Mbps data rate, operates at 3.3V, and consumes 54mA max supply current. Ideal for network interfaces in commercial applications due to its small size (4x4mm) and low power consumption.

RECTIFIER DIODE; Surface Mount: NO; Peak Reflow Temperature (C): 260; Maximum Operating Temperature: 175 Cel; JESD-609 Code: e3; No. of Elements: 1;

MBRS1100T3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.75V. It operates in temperatures ranging from -65 to 175°C, making it suitable for power applications. With a reverse test voltage of 100V, this diode is ideal for high-power circuits requiring efficient rectification.

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): .225 W; Maximum Drain-Source On Resistance: 7.5 ohm; Transistor Element Material: SILICON;

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;