LCGGX1A10EC by C & K Components | Switches

Image shown is a representation only.

Manufacturer	C & K Components
Manufacturer's Part Number	LCGGX1A10EC
Description	SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): LEVER ROLLER HIGH FORCE; Body Length/Diameter: 19.84 mm; Contact Timing: SNAP ACTION;
Datasheet	LCGGX1A10EC Datasheet

NAME	DESCRIPTION
Maximum DC Contact Current:	1 A
Center Contact Plating:	GOLD
Center Contact Material:	SILVER
Type (Actuator):	LEVER ROLLER HIGH FORCE
Maximum AC Contact Voltage:	125 V
Actuator Travel (mm):	4.3
Switch Action:	MOMENTARY
Terminal Material:	COPPER ALLOY
Termination Type:	SOLDER
Electrical Life:	6000 Cycle(s)
Maximum Operating Temperature:	85 Cel
Insulation Resistance:	1000000000 ohm
Maximum AC Contact Current:	1 A
End Contact Material:	COPPER ALLOY
Maximum DC Contact Voltage:	30 V
DC Maximum Rating R Load (Contact):	1A@30VDC
Dielectric Withstand Volts (V):	1000VRMS
Maximum Operating Force:	.47 N
Switch Type:	SNAP ACTING/LIMIT SWITCH
Maximum Pre Travel:	3.56 mm
AC Maximum Rating R Load (Contact):	1A@125VAC
Minimum Operating Temperature:	-25 Cel
Mounting Feature:	PANEL MOUNT
Body Width:	6.1 inch
Switch Function:	SPDT
Contact Timing:	SNAP ACTION
End Contact Plating:	SILVER
Body Height:	9.32 mm
Body Length/Diameter:	19.84 mm

Popular Products

CGA3E2X7R1H104K080AA by TDK is a fixed ceramic capacitor with a capacitance of 0.1 uF and a rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate at temperatures ranging from -55 to 125 °C. This capacitor is commonly used in surface mount applications for various electronic devices.

Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Package Shape or Style: ROUND; Housing: PLASTIC; Output Interface Type: 1-WIRE INTERFACE;

SZNUP2105LT1G by Onsemi is a Transient Suppression Device with 2 elements in a common anode configuration. It has a max non-repetitive peak reverse power dissipation of 350W and breakdown voltage of 29.1V. Ideal for applications requiring bidirectional polarity protection, such as automotive electronics and industrial equipment due to its AEC-Q101 compliance and high clamping voltage of 44V.

ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;

ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;

2N7002,215 by NXP Semiconductors is a small signal N-CHANNEL FET with a min DS breakdown voltage of 60V and max drain current of 0.3A. It is used for switching applications in enhancement mode, operates b/w -65 to 150 °C, and has a max power dissipation of 0.2W.

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .6 A; JEDEC-95 Code: TO-92;

BSS84PH6327XTSA2 by Infineon is a P-CHANNEL FET with 60V DS breakdown voltage, ideal for switching applications. It features a single configuration with built-in diode and operates in enhancement mode. With a max drain current of 0.17A and on-resistance of 8 ohm, it offers reliable performance in small outline packages.