PCM12SMTR by C & K Components | Switches

Image shown is a representation only.

Manufacturer	C & K Components
Manufacturer's Part Number	PCM12SMTR
Description	SLIDE SWITCH; Mounting Feature: SURFACE MOUNT-RIGHT ANGLE; Switch Function: SPDT; Type (Actuator): SLIDE; Contact Function: ON-ON; End Contact Plating: SILVER;
Datasheet	PCM12SMTR Datasheet

NAME	DESCRIPTION
Maximum DC Contact Current:	.3 A
No. of Positions:	2
Center Contact Plating:	SILVER
Center Contact Material:	COPPER ALLOY
Housing Material:	STAINLESS STEEL
Type (Actuator):	SLIDE
Terminal Finish:	Silver (Ag)
Switch Action:	LATCHED
Terminal Material:	COPPER ALLOY
Termination Type:	SOLDER
Electrical Life:	10000 Cycle(s)
Maximum Operating Temperature:	85 Cel
Material (Actuator):	NYLON
Contact Resistance:	70 mohm
Insulation Resistance:	100000000 ohm
End Contact Material:	COPPER ALLOY
Other Names:	401-2016-1 Q8179547 2266-PCM12SMTR *PCM12SMTR 401-2016-6 401-2016-2
Maximum DC Contact Voltage:	6 V
DC Maximum Rating R Load (Contact):	.3A@6VDC
Dielectric Withstand Volts (V):	500VAC
Contact Function:	ON-ON
Packing Method:	TR
Switch Type:	SLIDE SWITCH
JESD-609 Code:	e4
Minimum Operating Temperature:	-20 Cel
Mounting Feature:	SURFACE MOUNT-RIGHT ANGLE
Body Width:	2.6 inch
Switch Function:	SPDT
Length (Actuator):	.059 inch
End Contact Plating:	SILVER
Insulator Material:	POLYPHTALAMIDE
Body Height:	1.4 mm
Additional Features:	LOW PROFILE
Body Length/Diameter:	6.7 mm

Popular Products

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

L78L05ABZ-AP by STMicroelectronics is a BIPOLAR fixed positive single output standard regulator with an operating temperature range of -40 to 125°C. It has a nominal output voltage of 5V, max load regulation of 0.06%, and can handle a max output current of 0.07A. Ideal for applications requiring stable voltage regulation in various electronic devices.

NXP Semiconductors' BSS138BKW,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A ID. Ideal for SWITCHING applications, it features a built-in diode, 1.6 ohm RDS(on), and operates in ENHANCEMENT MODE. Suitable for surface mount with GULL WING terminals, it meets AEC-Q101 standards.

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .6 A; JEDEC-95 Code: TO-92;

MMBT2907ALT1G by Onsemi is a PNP BJT transistor with 100 min hFE, 60V VCEO, and 200MHz fT. Ideal for switching applications, it has a small outline package with Gull Wing terminals and can handle up to 0.6A of collector current.

N-CHANNEL AND P-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 5 ohm; No. of Terminals: 3;

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

BSS138K-13 by Diodes Inc. is a N-channel FET with 50V DS breakdown voltage, ideal for switching applications. It features single configuration with built-in diode, operating in enhancement mode. With 3 terminals and 0.31A max drain current, it offers high performance in small outline package style.

BAV99LT1G by Onsemi is a series connected diode with 2 elements in a small outline package. It has a max reverse recovery time of 0.006 us and can handle up to 100V repetitive peak reverse voltage. Ideal for rectification applications, this diode operates b/w -65°C to 150°C temperature range.