43.41.7.012.2000 by Finder | Relays

Image shown is a representation only.

Manufacturer	Finder
Manufacturer's Part Number	43.41.7.012.2000
Description	Other Relays; Relay Action: LATCHED; Relay Function: SPDT; Coil or Input Supply Type: DC; Reference Standard: CSA; UL; VDE; Input Switching Control Type: Random;
Datasheet	43.41.7.012.2000 Datasheet

NAME	DESCRIPTION
Nominal Coil Voltage:	12 V
Maximum Contact AC Power Rating (R Load):	2500VA@400VAC
Relay Function:	SPDT
DC Coil Release Voltage:	600 mV
Maximum AC Contact Voltage:	400 V
Dielectric Strength Between Open Contacts:	707.21 Vrms
Contact or Output Supply Type:	AC
No. of Terminals:	5
Coil or Input Supply Type:	DC
Relay Form:	1 Form C
Termination Type:	Solder
Operate Time:	6 ms
Electrical Life:	100000 Cycle(s)
DC Coil Operate Voltage:	8.4 V
Release Time:	4 ms
Maximum Operating Temperature:	85 °C (185 °F)
Input Switching Control Type:	Random
Maximum AC Contact Current:	10 A
End Contact Material:	Silver Cadmium Oxide
PCB Hole Count:	5
Coil Resistance:	580 Ω
Minimum Operating Temperature:	-40 °C (-40 °F)
Relay Action:	Latched
Body Width:	10.2 in (259.08 mm)
Maximum DC Coil Voltage:	18 V
Dielectric Strength Between Coil & Contacts:	2.8 kVrms
Terminal Length:	0.1378 in (3.5 mm)
Physical Dimension:	1.189 x 0.402 x 0.606 in (30.2 x 10.2 x 15.4 mm)
Body Height:	0.606 in (15.4 mm)
Body Length/Diameter:	1.189 in (30.2 mm)
Reference Standard:	CSA; UL; VDE
Coil Power (mW):	250 mW
Maximum Contact AC Rating (R Load):	10A@400VAC

Popular Products

N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; No. of Elements: 2; No. of Terminals: 6; Minimum DS Breakdown Voltage: 60 V;

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; Package Body Material: PLASTIC/EPOXY; JEDEC-95 Code: TO-236AB;

LM358D-T by NXP Semiconductors is a dual operational amplifier with 70dB CMRR, 1000kHz unity gain bandwidth, and 9000uV max input offset voltage. Widely used in commercial applications due to its small outline package and low bias current of 0.5uA.

CONNECTOR ACCESSORY; IEC Conformity: NO; Alternate Contact Sources: MILITARY; MIL Conformity: YES; Contact Gender: MALE; MIL-Connector Accessory Name: CONTACT;

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .6 A;

SZNUP2105LT1G by Onsemi is a Transient Suppression Device with 2 elements in a common anode configuration. It has a max non-repetitive peak reverse power dissipation of 350W and breakdown voltage of 29.1V. Ideal for applications requiring bidirectional polarity protection, such as automotive electronics and industrial equipment due to its AEC-Q101 compliance and high clamping voltage of 44V.

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain Current (Abs) (ID): .2 A; Maximum Feedback Capacitance (Crss): 8 pF;

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Feedback Capacitance (Crss): 10 pF; JEDEC-95 Code: TO-236AB;