24474 by Helukabel | Connector Accessories

Image shown is a representation only.

Manufacturer	Helukabel
Manufacturer's Part Number	24474
Description	WIRE AND CABLE; Rated Voltage: 300 V; Shielding: NO; IEC Conformity: NO; Conductor Material: COPPER ALLOY; Cross Section Area: 1 mm2;
Datasheet	24474 Datasheet

NAME	DESCRIPTION
Wire Gauge (AWG):	18
Construction:	STRANDED
Jacket Material:	THERMOPLASTIC ELASTOMER
IEC Conformity:	NO
Approvals (V):	CE; CSA; DIN; UL; VDE
Shielding:	NO
Minimum Operating Temperature:	-40 Cel
Rated Voltage:	300 V
Cross Section Area:	1 mm2
Conductor Finish:	TIN
MIL Conformity:	NO
Wire & Cable Name:	FLEXIBLE CORD AND FIXTURE WIRE
Connector Accessory Type:	WIRE AND CABLE
Insulator Material:	POLYPROPYLENE
No. of Conductors:	18
Conductor Material:	COPPER ALLOY
Maximum Operating Temperature:	80 Cel
Application:	DRAG CHAIN FOR LONG DISTANCE
DIN Conformity:	YES
Diameter:	15.1 mm

Popular Products

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Drain Current (ID): .2 A; Transistor Application: SWITCHING;

RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Repetitive Peak Reverse Voltage: 70 V; Maximum Reverse Recovery Time: .006 us; Maximum Output Current: .1 A;

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

FDD5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 45A IDM and 0.1 ohm RDS(ON), operating in ENHANCEMENT MODE at up to 175°C. The PLASTIC/EPOXY package with GULL WING terminals ensures efficient heat dissipation and reliable performance.

ESD5Z5.0T1G by Onsemi is a unidirectional Trans Voltage Suppressor Diode with 5V reverse test voltage and 174W peak power dissipation. It is used for transient suppression in electronic circuits, meeting IEC-61000-4-2, 4-4 standards and UL recognized for reliability.

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

MS3V-T1R32.768KHZ+/-20PPM12.5PF by Golledge Electronics is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 12.5 pF load capacitance. It is ideal for applications requiring precise timing in temperature-sensitive environments due to its -40 to 85 °C operating range.