Image shown is a representation only.
| Manufacturer | Honeywell Sensing And Control |
|---|---|
| Manufacturer's Part Number | NGCMB10AX24C |
| Description | SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPDT; Type (Actuator): PIN PLUNGER; AC Maximum Rating R Load (Contact): 0.75A@250VAC; Sealing: IP67; |
| Datasheet | NGCMB10AX24C Datasheet |
| NAME | DESCRIPTION |
|---|---|
| Operating Position: | 1.188 inch |
| Maximum DC Contact Current: | .1 A |
| Center Contact Plating: | SILVER ALLOY |
| Housing Material: | METAL |
| Type (Actuator): | PIN PLUNGER |
| Maximum AC Contact Voltage: | 250 V |
| Actuator Travel (mm): | 3.4 |
| Switch Action: | MAINTAINED |
| Electrical Life: | 5000000 Cycle(s) |
| Maximum Operating Temperature: | 70 Cel |
| Maximum AC Contact Current: | .75 A |
| End Contact Material: | SILVER ALLOY |
| Maximum DC Contact Voltage: | 250 V |
| DC Maximum Rating R Load (Contact): | 0.1A@250VDC |
| Dielectric Withstand Volts (V): | 1890VAC |
| Maximum Operating Force: | 9.5 N |
| Switch Type: | SNAP ACTING/LIMIT SWITCH |
| Maximum Pre Travel: | 2.1 mm |
| AC Maximum Rating R Load (Contact): | 0.75A@250VAC |
| Sealing: | IP67 |
| Minimum Operating Temperature: | -25 Cel |
| Mounting Feature: | PANEL MOUNT |
| Body Width: | 30 inch |
| Switch Function: | DPDT |
| Contact Timing: | SNAP ACTION |
| Length (Actuator): | .082 inch |
| End Contact Plating: | GOLD |
| Body Height: | 16.7 mm |
| Body Length/Diameter: | 55.8 mm |
