P6-14001 by Otto Engineering | Switches

Image shown is a representation only.

Manufacturer	Otto Engineering
Manufacturer's Part Number	P6-14001
Description	SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: 4PDT; Type (Actuator): ROLLER PLUNGER; Maximum Pre Travel: 1.02 mm; Maximum DC Contact Voltage: 28 V;
Datasheet	P6-14001 Datasheet

NAME	DESCRIPTION
Maximum DC Contact Current:	7 A
Maximum DC Contact Voltage:	28 V
DC Maximum Rating R Load (Contact):	7A@28VDC
Dielectric Withstand Volts (V):	1000VRMS
Maximum Operating Force:	53.38 N
Type (Actuator):	ROLLER PLUNGER
Switch Type:	SNAP ACTING/LIMIT SWITCH
Maximum Pre Travel:	1.02 mm
Sealing:	ENVIRONMENTALLY SEALED
Minimum Operating Temperature:	-55 Cel
Mounting Feature:	PANEL MOUNT-THREADED
Actuator Travel (mm):	4.2
Switch Action:	MOMENTARY
Switch Function:	4PDT
Contact Timing:	SNAP ACTION
Termination Type:	WIRE
Electrical Life:	25000 Cycle(s)
Body Height:	30.48 mm
Additional Features:	ROLLER / RADIAL LEADS
Body Length/Diameter:	26.19 mm
Maximum Operating Temperature:	85 Cel

Popular Products

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JESD-30 Code: O-MBCY-W3;

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Maximum Operating Temperature: 150 Cel;

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .3 W; Maximum Collector Current (IC): .6 A;

MMBT3906LT1G by Onsemi is a PNP BJT with VCEsat of 0.4V, hFE of 30, and fT of 250MHz. Ideal for small signal applications in electronics due to its low power dissipation, high transition frequency, and compact SOT-23 package. Suitable for use in temperature-sensitive environments with an operating range from -65°C to 150°C.

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

ESD5Z5.0T1G by Onsemi is a unidirectional Trans Voltage Suppressor Diode with 5V reverse test voltage and 174W peak power dissipation. It is used for transient suppression in electronic circuits, meeting IEC-61000-4-2, 4-4 standards and UL recognized for reliability.