Image shown is a representation only.
| Manufacturer | Knitter-switch |
|---|---|
| Manufacturer's Part Number | ATE1D |
| Description | TOGGLE SWITCH; Mounting Feature: THROUGH HOLE-STRAIGHT; Switch Function: SPDT; Type (Actuator): TOGGLE; Contact Function: ON-ON; Insulator Material: POLYBUTYLENE TEREPHTHALATE; |
| Datasheet | ATE1D Datasheet |
| NAME | DESCRIPTION |
|---|---|
| Center Contact Plating: | GOLD OVER NICKEL |
| Center Contact Material: | PHOSPHOR BRONZE |
| Type (Bushing): | UNTHREADED |
| Length (Bushing): | .157 inch |
| Housing Material: | BRASS |
| Type (Actuator): | TOGGLE |
| Terminal Finish: | TIN/NICKEL |
| Switch Action: | HORIZONTAL |
| Terminal Material: | PHOSPHOR BRONZE |
| Termination Type: | SOLDER |
| Electrical Life: | 60000 Cycle(s) |
| Maximum Operating Temperature: | 80 Cel |
| Manufacturer Series: | ATE |
| Contact Resistance: | 50 mohm |
| Insulation Resistance: | 500000000 ohm |
| End Contact Material: | PHOSPHOR BRONZE |
| Angle (Actuator): | 28 deg |
| Dielectric Withstand Volts (V): | 500VAC |
| Contact Function: | ON-ON |
| PCB Hole Count: | 3 |
| DC Maximum Power Rating R Load (Contact): | 0.4VA@48VDC |
| Switch Type: | TOGGLE SWITCH |
| Minimum Operating Temperature: | -20 Cel |
| Mounting Feature: | THROUGH HOLE-STRAIGHT |
| Body Width: | 5.0038 inch |
| Switch Function: | SPDT |
| Terminal Length: | .13 inch |
| Length (Actuator): | .236 inch |
| End Contact Plating: | GOLD OVER NICKEL |
| Insulator Material: | POLYBUTYLENE TEREPHTHALATE |
| Body Height: | 8.001 mm |
| Additional Features: | ROHS COMPLIANT |
| Body Length/Diameter: | 9.4996 mm |
| Diameter (Bushing): | .157 inch |
