SST39LF401C-55-4C-B3KE by Microchip Technology | Memory ICs

Image shown is a representation only.

Manufacturer	Microchip Technology
Manufacturer's Part Number	SST39LF401C-55-4C-B3KE
Description	FLASH; Temperature Grade: COMMERCIAL; No. of Terminals: 48; Package Code: TFBGA; Package Shape: RECTANGULAR; Package Body Material: PLASTIC/EPOXY;
Datasheet	SST39LF401C-55-4C-B3KE Datasheet

NAME	DESCRIPTION
Package Body Material:	PLASTIC/EPOXY
Maximum Time At Peak Reflow Temperature (s):	40
Programming Voltage (V):	3.3
Minimum Supply Voltage (Vsup):	3 V
Sub-Category:	Flash Memories
Surface Mount:	YES
Technology:	CMOS
No. of Sectors/Size:	1,2,1,7
Package Shape:	RECTANGULAR
Terminal Form:	BALL
Operating Mode:	ASYNCHRONOUS
Package Code:	TFBGA
Moisture Sensitivity Level (MSL):	3
No. of Ports:	1
Toggle Bit:	YES
Memory Width:	16
Qualification:	Not Qualified
Package Equivalence Code:	BGA48,6X8,32
Additional Features:	BOTTOM BOOT BLOCK
Minimum Data Retention Time:	100
Ready or Busy:	YES
Peak Reflow Temperature (C):	260
Terminal Pitch:	.8 mm
Maximum Standby Current:	.00002 Amp
Organization:	256KX16
Output Characteristics:	3-STATE
Maximum Seated Height:	1.2 mm
Maximum Supply Current:	30 mA
Command User Interface:	YES
Terminal Finish:	TIN SILVER COPPER
No. of Terminals:	48
No. of Words:	262144 words
Terminal Position:	BOTTOM
Package Style (Meter):	GRID ARRAY, THIN PROFILE, FINE PITCH
JESD-30 Code:	R-PBGA-B48
Maximum Operating Temperature:	70 Cel
Endurance:	100000 Write/Erase Cycles
Width:	6 mm
Boot Block:	BOTTOM
Memory Density:	4194304 bit
Sector Size (Words):	8K,4K,16K,32K
Memory IC Type:	FLASH
JESD-609 Code:	e1
Minimum Operating Temperature:	0 Cel
No. of Functions:	1
Type:	NOR TYPE
Common Flash Interface:	YES
Length:	8 mm
Maximum Access Time:	55 ns
No. of Words Code:	256K
Nominal Supply Voltage / Vsup (V):	3.3
Parallel or Serial:	PARALLEL
Temperature Grade:	COMMERCIAL
Maximum Supply Voltage (Vsup):	3.6 V
Data Polling:	YES
Power Supplies (V):	3.3

Popular Products

NE555D by Texas Instruments is an 8-terminal IC with a supply voltage range of 4.5V to 16V, suitable for analog waveform generation applications. It operates at temperatures from 0°C to 70°C and has a max supply current of 15mA. The package style is small outline, making it ideal for compact electronic designs.

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; Maximum Time At Peak Reflow Temperature (s): 10;

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

BSS123LT1G by Onsemi is a N-CHANNEL FET with 100V DS breakdown voltage, 0.17A drain current, and 6 ohm on resistance. Ideal for switching applications, it operates in enhancement mode with a max power dissipation of 0.225W. It comes in a small outline package with gull wing terminals and can withstand temperatures from -55 to 150°C.

CL10B104KB8NNNC by Samsung Electro-mechanics is a ceramic capacitor with capacitance of 0.1uF and rated DC voltage of 50V. It has a negative tolerance of 10% and temperature coefficient of 15ppm/°C, suitable for surface mount applications in various electronic devices. With dimensions of 1.6mm x 0.8mm x 0.9mm, it operates b/w -55 to 125 °C providing stable performance in compact designs.

KEMET C0603C104K5RACAUTO is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for automotive applications meeting AEC-Q200 standard, it comes in SMT package with matte tin finish and wraparound terminals.