Nexperia - PEMI8CSP/RW/P,135

Fair-rite Products' 2743021447 is a chip bead data line filter with approvals from IEC. Featuring a max operating temperature of 125°C, it offers a min frequency of 10 MHz and max DC resistance of 0.0012 ohm. Ideal for applications requiring surface mount filters with dimensions L9.6XB3.05XH2.85 (mm).

ACM1211-701-2PL-TL01 by TDK is a FERRITE CHIP data line filter with 2 functions, rated voltage of 80V, and max operating temp of 85°C. It has 4 terminals, dimensions of L12.0xB11.0xH6.0 (mm), and insulation resistance of 10 Mohm. Ideal for applications requiring high impedance filtering in compact spaces.

51-750-309 by Api Technologies is a Data Line Filter with 70V rated voltage and 10A rated current. With a max insertion loss of 65dB, it is ideal for panel mount applications requiring high capacitance at 12000uF. Its compact size of 4.95mm diameter and 26.62mm height make it suitable for various electronic devices.

NUF8402MNT4G by Onsemi is a data line filter with 8 functions, rated at 5V. It offers 35dB attenuation at 800MHz, operates b/w -40 to 85°C, and has a max DC resistance of 115 ohm. Commonly used in IEC-approved applications for noise filtering in data lines.

Murata Manufacturing's BLM18BB331SN1D is a chip bead data line filter with 2 terminals, operating b/w -55 to 125°C. With dimensions of 1.6x0.8x0.8mm, it offers an output impedance of 330Ω and max DC resistance of 0.58Ω. Ideal for surface mount applications, this ferrite chip filter has a rated current of 0.4A and is commonly used in electronic devices for noise suppression at frequencies up to 100MHz.

Wurth Elektronik 74279207 is a multi-layer data line filter with FERRITE CHIP construction. It has 2 terminals, operates b/w -55 to 125 °C, and offers a max frequency of 400 MHz. Ideal for surface mount applications in electronics to suppress noise and interference on data lines up to 100 OHM impedance.

NZF220DFT1G by Onsemi is a Data Line Filter with 2 functions and 5 terminals. Featuring FERRITE CHIP filter type, it has a width of 1.35mm and max DC resistance of 110 ohm. Ideal for applications requiring a compact surface mount solution with an output impedance of 50 OHM.

TDK's ACM2012H-900-2P-T03 is a data line filter with 10 Mohm min insulation resistance, 50V rated voltage, and 105°C max operating temp. Ideal for automotive applications due to AEC-Q200 screening level and compact dimensions of L2.0xB1.2xH1.2 mm.

FERRITE CHIP; Maximum DC Resistance: .1 ohm; Rated Current: 2.5 A; Approvals (V): IEC; Width (mm): 1.6; Output Impedance (ohm): 600 OHM;

Wurth Elektronik 74279279 is a multi-layer FERRITE CHIP filter with 2 terminals, suitable for data line applications. It operates b/w -55 to 125 °C, has a DC resistance of 1 ohm, and an output impedance of 600 OHM at frequencies ranging from 100 MHz to 180 MHz. This surface mount component measures L1.0XB0.5XH0.5 (mm) and is packed in TAPE AND REEL format for easy handling during assembly.

Murata Manufacturing's DLW21SN121SQ2L is a Data Line Filter with 2 functions, rated at 50V. It offers a max operating temperature of 85°C and min insulation resistance of 10 Mohm. Ideal for applications requiring filtering in data lines, it has dimensions of L2.0xB1.2xH1.2 (mm) and operates at a rated current of 0.37A.

DATA LINE FILTER; Maximum DC Resistance: .01 ohm; Rated Current: 10 A; JESD-609 Code: e4; Additional Features: PI-TYPE CIRCUIT; Minimum Operating Temperature: -55 Cel;

Laird Technologies' HZ0805E601R-10 is a chip bead data line filter with 2 terminals, operating b/w -40 to 125 °C. With dimensions of L2XB1.25XH.9 (mm), it offers a frequency range from 25 MHz to 1000 MHz and an output impedance of 600 OHM. Ideal for surface mount applications, this ferrite chip filter has a max DC resistance of 0.3 ohm and can handle up to 0.5 A rated current.

Murata Manufacturing's NFM41PC204F1H3 is a data line filter with 2A rated current, 0.2uF capacitance, and 50V rated voltage. It features feed through capacitor type for applications requiring noise suppression in electronic circuits. Operating temperature range from -55°C to 85°C makes it suitable for various environments.

Murata Manufacturing's BLM31PG500SN1L is a chip bead data line filter with 2 terminals, operating b/w -55 to 125 °C. With dimensions of L3.2XB1.6XH1.1 (mm), it offers a max frequency of 100 MHz and DC resistance of 0.025 ohm. Ideal for applications requiring a 50 OHM output impedance, this ferrite chip filter is designed for surface mount installation in various electronic devices.

Pulse Electronics P0473NL is a data line filter with 2 functions, AEC-Q200 screening level. It offers inductance of 880uH, max operating temp of 120°C, and rated current of 1.63A. Ideal for applications requiring surface mount filters with dimensions L12.7xB12.7xH5.46mm such as automotive electronics.

PA3747.905NL by Pulse Electronics is a data line filter with 2 functions, AEC-Q200 screening level, and 4 terminals. It operates b/w -40 to 125 °C and has an inductance of 6030 uH. Ideal for applications requiring high output impedance and rated current of 1.45 A.

Murata Manufacturing's BNX016-01 is a 3-function data line filter with 40 dB max insertion loss, rated for 25V and 15A. With dimensions of L12.0xB11.0xH8.0 mm, it operates b/w -40 to 125 °C and has an output impedance of 50 ohm. Ideal for applications requiring noise suppression in data lines.

Murata Manufacturing's BLM15HG102SN1D is a chip bead data line filter with 2 terminals, operating b/w -55 to 125°C. With dimensions of 1x0.5x0.5mm, it offers a DC resistance of 1.1 ohm and an output impedance of 1000 ohm for frequencies ranging from 100MHz to 1000MHz. Ideal for surface mount applications in electronic devices requiring noise suppression on data lines.

FERRITE CHIP; Maximum DC Resistance: .08 ohm; Rated Current: 2.1 A; Minimum Operating Temperature: -55 Cel; Mounting Type: SURFACE MOUNT; No. of Functions: 1;