MTA106D by Nidec Copal Electronics | Switches

Image shown is a representation only.

Manufacturer	Nidec Copal Electronics
Manufacturer's Part Number	MTA106D
Description	TOGGLE SWITCH; Mounting Feature: THROUGH HOLE-STRAIGHT; Switch Function: SPDT; Type (Actuator): STANDARD TOGGLE; Contact Function: ON-ON; Contact Resistance: 20 mohm;
Datasheet	MTA106D Datasheet

NAME	DESCRIPTION
Angle (Actuator):	24 deg
Dielectric Withstand Volts (V):	1500VAC
Contact Function:	ON-ON
PCB Hole Count:	3
Type (Bushing):	1/4-40
Length (Bushing):	.314 inch
Type (Actuator):	STANDARD TOGGLE
Switch Type:	TOGGLE SWITCH
AC Maximum Rating R Load (Contact):	6A@120VAC
Minimum Operating Temperature:	-20 Cel
Mounting Feature:	THROUGH HOLE-STRAIGHT
Body Width:	8 inch
Switch Action:	LATCHED
Switch Function:	SPDT
Termination Type:	SOLDER
Length (Actuator):	.413 inch
Electrical Life:	30000 Cycle(s)
Body Height:	9 mm
Body Length/Diameter:	13 mm
Maximum Operating Temperature:	85 Cel
Contact Resistance:	20 mohm
Insulation Resistance:	1000000000 ohm

Popular Products

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): 1.8 W; Maximum Collector Current (IC): .8 A;

P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; JESD-609 Code: e0; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

LM2931Z-5.0G by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V output voltage, 0.6V dropout voltage, and 0.1A output current. It is ideal for applications requiring stable power supply in temperature-sensitive environments due to its operating range of -40°C to 125°C.

CONNECTOR ACCESSORY; Contact Type: CRIMP REAR RELEASE; Mating Contacts: M39029/56-348, M39029/57-354; Insertion Tool Sources: MILITARY; Contact Gender: MALE; Alternate Contact Sources: MILITARY;

1N4148WT by Onsemi is a single rectifier diode with a max output current of 0.3A and forward voltage of 0.72V. It has a small outline package style, matte tin terminal finish, and operates at temperatures up to 150°C. Ideal for applications requiring fast reverse recovery time such as power supplies and signal demodulation circuits.

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Moisture Sensitivity Level (MSL): 1; Maximum Drain Current (ID): .46 A;