
Image shown is a representation only.
Manufacturer | Nkk Switches |
---|---|
Manufacturer's Part Number | BB25AP |
Description | Other Switches; Mounting Feature: THROUGH HOLE-STRAIGHT; Switch Function: DPDT; Type (Actuator): PUSHBUTTON; Contact Function: ON-(ON); Body Width: 8.7884 inch; |
Datasheet | BB25AP Datasheet |
NAME | DESCRIPTION |
---|---|
Center Contact Plating: | GOLD OVER SILVER |
Center Contact Material: | PHOSPHOR BRONZE |
Type (Bushing): | UNTHREADED |
Length (Bushing): | .138 inch |
Type (Actuator): | PUSHBUTTON |
Terminal Finish: | GOLD |
Actuator Travel (mm): | 1.0922 |
Switch Action: | VERTICAL |
Terminal Material: | BRASS |
Termination Type: | SOLDER |
Electrical Life: | 50000 Cycle(s) |
Maximum Operating Temperature: | 70 Cel |
Material (Actuator): | POLYACETAL |
Contact Resistance: | 50 mohm |
Insulation Resistance: | 500000000 ohm |
Color (Actuator): | WHITE |
End Contact Material: | BRASS |
Angle (Actuator): | 0 deg |
Dielectric Withstand Volts (V): | 500VAC |
Contact Function: | ON-(ON) |
PCB Hole Count: | 6 |
DC Maximum Power Rating R Load (Contact): | 0.4VA@28VDC |
JESD-609 Code: | e4 |
Minimum Operating Temperature: | -25 Cel |
Mounting Feature: | THROUGH HOLE-STRAIGHT |
Body Width: | 8.7884 inch |
Switch Function: | DPDT |
Terminal Length: | .122 inch |
Length (Actuator): | .213 inch |
End Contact Plating: | GOLD OVER NICKEL |
Insulator Material: | GLASS FILLED POLYAMIDE |
Body Height: | 21.6154 mm |
Body Length/Diameter: | 8.7884 mm |
Washability: | SOLVENT |
Diameter (Bushing): | .236 inch |