IS15ESBFP4RGB by Nkk Switches | Switches

Image shown is a representation only.

Manufacturer	Nkk Switches
Manufacturer's Part Number	IS15ESBFP4RGB
Description	PUSHBUTTON SWITCH; Mounting Feature: THROUGH HOLE-STRAIGHT; Switch Function: SPDT; Type (Actuator): PUSHBUTTON; Contact Function: OFF-(ON); Illumination: LED;
Datasheet	IS15ESBFP4RGB Datasheet

NAME	DESCRIPTION
Angle (Actuator):	0 deg
Other Names:	360-3379
Maximum DC Contact Current:	.1 A
Maximum DC Contact Voltage:	12 V
DC Maximum Rating R Load (Contact):	0.1A@12VDC
Contact Function:	OFF-(ON)
Type (Actuator):	PUSHBUTTON
Switch Type:	PUSHBUTTON SWITCH
Sealing:	EPOXY
Minimum Operating Temperature:	-15 Cel
Mounting Feature:	THROUGH HOLE-STRAIGHT
Actuator Travel (mm):	4.4958
Switch Action:	MOMENTARY
Switch Function:	SPDT
Termination Type:	SOLDER
Electrical Life:	3000000 Cycle(s)
Illumination:	LED
Maximum Operating Temperature:	50 Cel
Contact Resistance:	200 mohm
Insulation Resistance:	100000000 ohm

Popular Products

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Terminal Position: DUAL; Minimum Operating Temperature: -55 Cel;

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel; Maximum Line Regulation (%/V): .07;

LP2950CDT-3.3G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.1A. It has a small outline package style, operates at temperatures ranging from -40 to 125 °C, and is suitable for applications requiring low dropout voltage and precise voltage regulation in electronic circuits.

MMBT3904LT1G by Onsemi is a NPN BJT with max. collector-emitter voltage of 40V, hFE of 30, and fT of 300MHz. Ideal for small signal applications in electronics due to its compact size, high transition frequency, and low power dissipation capabilities.

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

AH180-WG-7 by Diodes Inc. is a magnetic field sensor with 1.5mT hysteresis, 0.30V output range, and 9mA max operating current. Ideal for applications requiring non-inverting analog voltage output in a compact rectangular package suitable for surface mount installations.