MPA106F by TE Connectivity | Switches

Image shown is a representation only.

Manufacturer	TE Connectivity
Manufacturer's Part Number	MPA106F
Description	PUSHBUTTON SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): EXTENDED TYPE; Solderability: HAND; Color (Actuator): NATURAL;
Datasheet	MPA106F Datasheet

NAME	DESCRIPTION
Maximum DC Contact Current:	6 A
Center Contact Plating:	GOLD OVER SILVER
Type (Bushing):	1/4-40
Length (Bushing):	.28 inch
Housing Material:	THERMOSET
No. of Independent Keys:	1
Type (Actuator):	EXTENDED TYPE
Maximum AC Contact Voltage:	250 V
Solderability:	HAND
Terminal Finish:	GOLD FLASH
Finish (Actuator):	NICKEL
Actuator Travel (mm):	3.556
Switch Action:	MOMENTARY
Terminal Material:	COPPER ALLOY
Termination Type:	WIRE
Electrical Life:	50000 Cycle(s)
Maximum Operating Temperature:	85 Cel
Material (Actuator):	NICKEL PLATED COPPER ALLOY
Contact Resistance:	10 mohm
Insulation Resistance:	1000000000 ohm
Color (Actuator):	NATURAL
Maximum AC Contact Current:	6 A
End Contact Material:	SILVER OVER COPPER
Angle (Actuator):	0 deg
Maximum DC Contact Voltage:	28 V
DC Maximum Rating R Load (Contact):	4A@28VDC
Dielectric Withstand Volts (V):	1500VRMS
Maximum Operating Force:	11.9952 N
Packing Method:	BULK
Switch Type:	PUSHBUTTON SWITCH
AC Maximum Rating R Load (Contact):	6A@125VAC
Sealing:	MOLDED
Minimum Operating Temperature:	-20 Cel
Mounting Feature:	PANEL MOUNT
Body Width:	8 inch
Switch Function:	SPDT
Contact Timing:	BREAK-BEFORE-MAKE
Terminal Length:	.16 inch
Length (Actuator):	.55 inch
End Contact Plating:	GOLD
Body Height:	11.68 mm
Body Length/Diameter:	13 mm
Washability:	SOLVENT
Diameter (Bushing):	.25 inch

Popular Products

RECTIFIER DIODE; Terminal Position: END; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

MMBT3906LT1G by Onsemi is a PNP BJT with VCEsat of 0.4V, hFE of 30, and fT of 250MHz. Ideal for small signal applications in electronics due to its low power dissipation, high transition frequency, and compact SOT-23 package. Suitable for use in temperature-sensitive environments with an operating range from -65°C to 150°C.

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

The Yageo RC0402FR-071KL is a fixed resistor with a resistance of 1000 ohm and a tolerance of 1%. It is suitable for surface mount applications and has a max operating temperature of 155 °C.

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Voltage Tolerance: 5 %; Operating Temperature (TJ-Max): 125 Cel; Maximum Output Voltage-1: 5.25 V;

FTDI's FT232RQ-REEL is a USB bus controller with 32 terminals, operating at 3.3-5.25V. It supports data transfer rates up to 60MBps and clock frequency of 12.02MHz, suitable for RS232/RS422/RS485 interfaces in various applications like industrial automation and communication systems.

MBR0520LT1 by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, making it suitable for applications requiring low power consumption in compact electronic devices. This single-configured diode is surface mountable and has a max repetitive peak reverse voltage of 20V, ideal for small outline package designs.