Image shown is a representation only.
| Manufacturer | Nkk Switches |
|---|---|
| Manufacturer's Part Number | MB2511S2G13-BA |
| Description | PUSHBUTTON SWITCH; Mounting Feature: THROUGH HOLE-STRAIGHT; Switch Function: SPDT; Type (Actuator): PUSHBUTTON; Contact Function: ON-(ON); Solderability: WAVE; |
| Datasheet | MB2511S2G13-BA Datasheet |
| NAME | DESCRIPTION |
|---|---|
| Center Contact Plating: | GOLD |
| Center Contact Material: | COPPER |
| Length (Bushing): | .3 inch |
| Housing Material: | STAINLESS STEEL |
| Type (Actuator): | PUSHBUTTON |
| Solderability: | WAVE |
| Finish (Actuator): | NICKEL |
| Actuator Travel (mm): | .9906 |
| Switch Action: | MOMENTARY |
| Termination Type: | SOLDER |
| Electrical Life: | 100000 Cycle(s) |
| Maximum Operating Temperature: | 85 Cel |
| Material (Actuator): | BRASS |
| Contact Resistance: | 30 mohm |
| Insulation Resistance: | 1000000000 ohm |
| Dielectric Withstand Volts (V): | 1000VAC |
| Contact Function: | ON-(ON) |
| PCB Hole Count: | 7 |
| DC Maximum Power Rating R Load (Contact): | 0.4VA@28VDC |
| Switch Type: | PUSHBUTTON SWITCH |
| Sealing: | EPOXY |
| Minimum Operating Temperature: | -30 Cel |
| Mounting Feature: | THROUGH HOLE-STRAIGHT |
| Body Width: | 7.874 inch |
| Switch Function: | SPDT |
| Contact Timing: | SNAP ACTION |
| Terminal Length: | .189 inch |
| Length (Actuator): | .346 inch |
| End Contact Plating: | GOLD |
| Body Height: | 12.7 mm |
| Body Length/Diameter: | 13.0048 mm |
| Washability: | SOLVENT |
| Diameter (Bushing): | .244 inch |
