MRK206-A by Nkk Switches | Switches

Image shown is a representation only.

Manufacturer	Nkk Switches
Manufacturer's Part Number	MRK206-A
Description	ROTARY SWITCH; Mounting Feature: THROUGH HOLE-STRAIGHT; Switch Function: DP6T; Type (Actuator): SHAFT TYPE; Solderability: HAND/WAVE; Electrical Life: 10000 Cycle(s);
Datasheet	MRK206-A Datasheet

NAME	DESCRIPTION
Maximum DC Contact Current:	.1 A
No. of Positions:	6
Center Contact Plating:	GOLD
Center Contact Material:	PHOSPHOR BRONZE
Type (Bushing):	M6P0.75
Length (Bushing):	.217 inch
Housing Material:	ZINC ALLOY
Type (Actuator):	SHAFT TYPE
Maximum AC Contact Voltage:	28 V
Solderability:	HAND/WAVE
Finish (Actuator):	NICKEL
Switch Action:	LATCHED
Terminal Material:	PHOSPHOR BRONZE
Termination Type:	SOLDER
Electrical Life:	10000 Cycle(s)
Maximum Operating Temperature:	70 Cel
Material (Actuator):	BRASS
Contact Resistance:	50 mohm
Insulation Resistance:	100000000 ohm
Maximum AC Contact Current:	.1 A
End Contact Material:	PHOSPHOR BRONZE
No. of Switch Sections:	1
Maximum DC Contact Voltage:	28 V
DC Maximum Rating R Load (Contact):	0.1A@28VDC
Dielectric Withstand Volts (V):	500VAC
PCB Hole Count:	14
DC Maximum Power Rating R Load (Contact):	0.4VA@28VDC
Switch Type:	ROTARY SWITCH
AC Maximum Rating R Load (Contact):	0.1A@28VAC
Sealing:	IP67
Indexing Angle:	30 deg
Minimum Operating Temperature:	-10 Cel
Mounting Feature:	THROUGH HOLE-STRAIGHT
Switch Function:	DP6T
Contact Timing:	BREAK-BEFORE-MAKE
Terminal Length:	.138 inch
Length (Actuator):	.394 inch
End Contact Plating:	GOLD
Insulator Material:	GLASS FILLED POLYAMIDE
Body Height:	.398 mm
Additional Features:	PANEL MOUNTABLE WITH THREADING
Body Length/Diameter:	.96 mm
Diameter (Bushing):	.236 inch
AC Maximum Power Rating R Load (Contact):	0.4VA@28VAC

Popular Products

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

CONNECTOR ACCESSORY; Minimum Operating Temperature: -65 Cel; Wire Gauge (AWG): 0; Maximum Wire Size: 0 AWG; Maximum Operating Temperature: 175 Cel; Material: ALUMINUM ALLOY;

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Diodes Incorporated BAV99W-7-F is a fast recovery rectifier diode with 2 elements in series connected, center tap configuration. It has a max reverse recovery time of 0.004 us and can handle a max output current of 0.15 A. Ideal for applications requiring fast switching capabilities and operating temperatures ranging from -65 to 150 °C.

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;

2N7002,215 by NXP Semiconductors is a small signal N-CHANNEL FET with a min DS breakdown voltage of 60V and max drain current of 0.3A. It is used for switching applications in enhancement mode, operates b/w -65 to 150 °C, and has a max power dissipation of 0.2W.

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Minimum DS Breakdown Voltage: 50 V; Maximum Operating Temperature: 150 Cel;