WR11AF by Nkk Switches | Switches

Image shown is a representation only.

Manufacturer	Nkk Switches
Manufacturer's Part Number	WR11AF
Description	ROCKER SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPST; Type (Actuator): ROCKER; Contact Function: ON-OFF; Solderability: HAND;
Datasheet	WR11AF Datasheet

NAME	DESCRIPTION
Maximum DC Contact Current:	15 A
Center Contact Plating:	SILVER
Housing Material:	POLYAMIDE
Type (Actuator):	ROCKER
Maximum AC Contact Voltage:	250 V
Solderability:	HAND
Terminal Material:	BRASS
Termination Type:	QUICK CONNECT
Electrical Life:	15000 Cycle(s)
Maximum Operating Temperature:	85 Cel
Manufacturer Series:	WR
Material (Actuator):	POLYPHENYLENE OXIDE
Contact Resistance:	10 mohm
Insulation Resistance:	200000000 ohm
Color (Actuator):	BLACK
Maximum AC Contact Current:	15 A
Angle (Actuator):	24 deg
Maximum DC Contact Voltage:	30 V
DC Maximum Rating R Load (Contact):	15A@30VDC
Contact Function:	ON-OFF
Switch Type:	ROCKER SWITCH
AC Maximum Rating R Load (Contact):	15A@250VAC
Sealing:	EPOXY
Minimum Operating Temperature:	-20 Cel
Mounting Feature:	PANEL MOUNT
Body Width:	24.003 inch
Switch Function:	SPST
Terminal Length:	.423 inch
Length (Actuator):	.209 inch
End Contact Plating:	SILVER
Body Height:	30.607 mm
Body Length/Diameter:	40.9956 mm

Popular Products

MBR0540T1G by Onsemi is a Schottky rectifier diode with max. forward voltage of 0.62V and max. output current of 0.5A, ideal for applications requiring high efficiency power conversion in small outline packages. Operating temp range: -55 to 150°C, with peak reflow temp at 260°C, making it suitable for various electronic devices needing reliable rectification performance in compact designs.

TCA6424ARGJR by Texas Instruments is a CMOS parallel I/O port with 24 bits and 3 ports. It operates b/w -40 to 85°C, suitable for industrial applications. With a max clock frequency of 0.4 MHz, it offers low power consumption at only 0.03 mA supply current.

OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Code: TO-99; Package Shape: ROUND;

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain-Source On Resistance: 3.5 ohm; Terminal Finish: Tin/Lead (Sn/Pb);

FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Minimum DS Breakdown Voltage: 60 V; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; No. of Terminals: 3;

Other Interface ICs; No. of Terminals: 14; Package Equivalence Code: FL14(UNSPEC); Power Supplies (V): +-5,-15; Package Body Material: PLASTIC/EPOXY; Surface Mount: YES;

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1750VAC; No. of Connectors: ONE; Mixed Contacts: NO;

BSS138NH6327XTSA2 by Infineon is a N-CHANNEL FET with 60V DS Breakdown Voltage, ideal for small signal applications. Operating in Enhancement Mode, it has 0.36W Power Dissipation and 3.5 ohm Drain-Source Resistance. With Gull Wing terminals and AEC-Q101 reference standard, it's suitable for automotive electronics due to its high temperature range of -55 to 150 °C.