A7PS-206-PM by Omron | Switches

Image shown is a representation only.

Manufacturer	Omron
Manufacturer's Part Number	A7PS-206-PM
Description	THUMB/PUSHWHEEL SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: BINARY CODED DECIMAL; Type (Actuator): THUMBWHEEL; Contact Function: ON-ON; Body Height: 43.0022 mm;
Datasheet	A7PS-206-PM Datasheet

NAME	DESCRIPTION
Maximum DC Contact Current:	.1 A
No. of Positions:	1
Length (Bushing):	0 inch
Body Color:	GRAY
Type (Actuator):	THUMBWHEEL
Maximum AC Contact Voltage:	50 V
Switch Action:	CIRCULAR
Termination Type:	SOLDER LUG
Electrical Life:	50000 Cycle(s)
Maximum Operating Temperature:	65 Cel
Contact Resistance:	200 mohm
Insulation Resistance:	1000000000 ohm
Maximum AC Contact Current:	.1 A
Maximum DC Contact Voltage:	28 V
DC Maximum Rating R Load (Contact):	0.1A@28VDC
Dielectric Withstand Volts (V):	1000VAC
Contact Function:	ON-ON
Switch Type:	THUMB/PUSHWHEEL SWITCH
AC Maximum Rating R Load (Contact):	0.1A@50VAC
Minimum Operating Temperature:	-10 Cel
Mounting Feature:	PANEL MOUNT
Body Width:	21.9964 inch
Switch Function:	BINARY CODED DECIMAL
Contact Timing:	BREAK-BEFORE-MAKE
Terminal Length:	0 inch
Length (Actuator):	.283 inch
Insulator Material:	POLYACETAL
Body Height:	43.0022 mm
Additional Features:	FRONT MOUNTING
Body Length/Diameter:	32.9946 mm

Popular Products

BSS138LT3G by Onsemi is a N-CHANNEL FET with a min DS breakdown voltage of 50V. It is used for switching applications and has a max drain current of 0.2A and max drain-source on resistance of 3.5 ohm.

ECA2DHG4R7 by Panasonic is a 4.7uF aluminum electrolytic capacitor with 200V rated DC voltage. It features tan delta of 0.15, leakage current of 0.0664mA, and ripple current of 50mA, making it ideal for applications requiring high capacitance stability and low leakage in through-hole mounting setups at temperatures ranging from -25 to 105°C.

TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Polarity: BIDIRECTIONAL; Nominal Breakdown Voltage: 21.05 V; Maximum Repetitive Peak Reverse Voltage: 18 V;

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

NXP Semiconductors' BSS138BK,215 is a N-CHANNEL FET with 0.36A max drain current and 0.42W power dissipation. Ideal for applications requiring single configuration and surface mount technology, such as enhancement mode operation in temperatures up to 150°C.

OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;