V-10G3-1C25-K by Omron | Switches

Image shown is a representation only.

Manufacturer	Omron
Manufacturer's Part Number	V-10G3-1C25-K
Description	SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): LONG HINGE LEVER; Maximum Pre Travel: 9 mm; Body Height: 15.9 mm;
Datasheet	V-10G3-1C25-K Datasheet

NAME	DESCRIPTION
Maximum DC Contact Current:	10 A
Maximum DC Contact Voltage:	8 V
DC Maximum Rating R Load (Contact):	10A@8VDC
Maximum Operating Force:	1.96 N
Type (Actuator):	LONG HINGE LEVER
Switch Type:	SNAP ACTING/LIMIT SWITCH
Maximum AC Contact Voltage:	250 V
Maximum Pre Travel:	9 mm
AC Maximum Rating R Load (Contact):	10A@250VAC
Sealing:	IP40
Minimum Operating Temperature:	-25 Cel
Mounting Feature:	PANEL MOUNT
Actuator Travel (mm):	11
Body Width:	10.3 inch
Switch Action:	MOMENTARY
Switch Function:	SPDT
Termination Type:	QUICK CONNECT
Electrical Life:	300000 Cycle(s)
Body Height:	15.9 mm
Body Length/Diameter:	27.8 mm
Maximum Operating Temperature:	80 Cel
Manufacturer Series:	V
Maximum AC Contact Current:	10 A

Popular Products

USB2514BI-AEZG by Microchip is a BUS CONTROLLER IC with 36 terminals, operating at 3.3V, supporting I2C, SMBUS, and USB buses. It has a clock frequency of up to 24MHz and can withstand industrial temperatures from -40°C to 85°C. This chip carrier package is surface mountable and suitable for various applications requiring USB connectivity.

LM358N by Texas Instruments is an operational amplifier with 2 functions, offering a max input offset voltage of 9000 uV and a nominal common mode reject ratio of 85 dB. Widely used in commercial applications, it operates at temperatures ranging from 0 to 70 °C and has a unity gain bandwidth of 1000 kHz.

LM358D-T by NXP Semiconductors is a dual operational amplifier with 70dB CMRR, 1000kHz unity gain bandwidth, and 9000uV max input offset voltage. Widely used in commercial applications due to its small outline package and low bias current of 0.5uA.

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

KEMET C1210C104K5RACTU is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics and ±10% tolerance, suitable for surface mount applications in a wide temperature range from -55°C to 125°C. Its compact rectangular package makes it ideal for various electronic devices.

INTERFACE CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE;

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Operating Mode: ENHANCEMENT MODE; Qualification: Not Qualified;