2N5060G by Onsemi | Triggering Devices

Image shown is a representation only.

Manufacturer	Onsemi
Manufacturer's Part Number	2N5060G
Description	SCR; Package Style (Meter): CYLINDRICAL; Surface Mount: NO; Terminal Position: BOTTOM; Configuration: SINGLE; Additional Features: SENSITIVE GATE;
Datasheet	2N5060G Datasheet
In Stock	1,472

NAME	DESCRIPTION
Package Body Material:	PLASTIC/EPOXY
Trigger Device Type:	SCR
Configuration:	SINGLE
Sub-Category:	Silicon Controlled Rectifiers
Surface Mount:	NO
Terminal Finish:	TIN SILVER COPPER
Maximum Holding Current:	10 mA
No. of Terminals:	3
Terminal Position:	BOTTOM
Package Style (Meter):	CYLINDRICAL
JESD-30 Code:	O-PBCY-T3
No. of Elements:	1
Package Shape:	ROUND
Terminal Form:	THROUGH-HOLE
Maximum Operating Temperature:	110 Cel
Repetitive Peak Off-state Voltage:	30 V
Other Names:	2N5060GOS
Maximum RMS On-state Current:	.8 A
JEDEC-95 Code:	TO-92
Repetitive Peak Reverse Voltage:	30 V
JESD-609 Code:	e1
Minimum Operating Temperature:	-40 Cel
Non Repetitive Peak On-state Current:	10 A
Maximum DC Gate Trigger Voltage:	1.2 V
Maximum DC Gate Trigger Current:	.2 mA
Qualification:	Not Qualified
Maximum On-state Current:	.51 A
Additional Features:	SENSITIVE GATE
Peak Reflow Temperature (C):	260
Nominal Circuit Commutated Turn-off Time:	10 us

Pricing (USD)

Qty.	Unit Price	Ext. Price
1,472	-	-

BSS123LT1G by Onsemi is a N-CHANNEL FET with 100V DS breakdown voltage, 0.17A drain current, and 6 ohm on resistance. Ideal for switching applications, it operates in enhancement mode with a max power dissipation of 0.225W. It comes in a small outline package with gull wing terminals and can withstand temperatures from -55 to 150°C.

OPA2277UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 100 uV and micropower consumption of 1.65 mA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1000 kHz in a small outline package.

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

MICROCONTROLLER, RISC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 64; Package Code: TQFP; Package Shape: SQUARE;

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

U.FL-R-SMT-1(10) by Hirose Electric is a RF connector with 50 ohm impedance, 0.05 dB insertion loss, and 8 GHz operating frequency. Ideal for board mounting in commercial applications, it features gold termination finish, liquid crystal polymer insulator, and 200VAC dielectric voltage resistance.

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Style (Meter): SMALL OUTLINE; Maximum Drain Current (ID): .22 A; Package Shape: RECTANGULAR;