1527595 by Phoenix Contact | Connector Accessories

Image shown is a representation only.

Manufacturer	Phoenix Contact
Manufacturer's Part Number	1527595
Description	CABLE ASSEMBLY; Connector Side-1: M12 PLUG; Connector Side-2: M12 SOCKET; Rated Voltage: 250 V; Rated Current: 4 A; Shielding: NO;
Datasheet	1527595 Datasheet

NAME	DESCRIPTION
Wire Gauge (AWG):	18
IEC Conformity:	NO
Cross Section Area:	.75 mm2
MIL Conformity:	NO
Conductor Material:	BARE COPPER
Maximum Operating Temperature:	90 Cel
DIN Conformity:	NO
Diameter:	5.9 mm
Construction:	STRANDED
Connector Side-1:	M12 PLUG
Connector Side-2:	M12 SOCKET
Jacket Material:	PUR
Approvals (V):	UL
Shielding:	NO
Minimum Operating Temperature:	-25 Cel
Rated Voltage:	250 V
Resistance:	.026 ohm
Length:	28 mm
Wire & Cable Name:	COMMUNICATION CABLE
Connector Accessory Type:	CABLE ASSEMBLY
Insulator Material:	POLYVINYLCHLORIDE
No. of Conductors:	4
Additional Features:	IP65, IP67, IP68
Rated Current:	4 A
Stranding:	42X0.15

Popular Products

Yageo's RC0603FR-071KL is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in electronics, it operates b/w -55 to 155 °C with a temperature coefficient of 100 ppm/°C.

SS495A-SP by Honeywell is a magnetic field sensor with 10.5V max supply voltage, 3" body width, and 1.5% linearity. Ideal for applications requiring a Hall effect sensor with -40 to 150°C operating temperature range, such as position sensing in automotive or industrial systems.

OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Low-Offset: NO;

OHN3020U by Tt Electronics Plc is a magnetic field sensor with a max supply voltage of 24V and hysteresis of 5mT. It features an output range of 25mA and operates in temperatures ranging from -20 to 85°C. Ideal for applications requiring precise detection and measurement of magnetic fields, such as automotive sensors or industrial automation systems.

LL4148GS08 by Temic Semiconductors is a glass diode with a max reverse recovery time of 0.008 us and max forward voltage of 1 V. It is a rectifier diode with a max output current of 0.15 A, ideal for applications requiring fast switching speeds and low power dissipation in electronic circuits.

TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Nominal Breakdown Voltage: 21.05 V; Maximum Clamping Voltage: 29.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;

OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

STM32F103C8T6 by STMicroelectronics is a 32-bit microcontroller with 48 terminals, operating at up to 16 MHz. It features 10-Ch 12-Bit ADC channels and 7 DMA channels, suitable for industrial applications requiring low power consumption and high-speed connectivity via CAN, I2C(2), SPI(2), USART(3), USB.

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Feedback Capacitance (Crss): 10 pF; JEDEC-95 Code: TO-236AB;