Image shown is a representation only.
| Manufacturer | Recom Power |
|---|---|
| Manufacturer's Part Number | REM10-2405SW/A/CTRL |
| Description | DC-DC REGULATED POWER SUPPLY MODULE; No. of Terminals: 7; Package Code: DMA; Package Shape: RECTANGULAR; Surface Mount: NO; Length: 31.8 mm; |
| Datasheet | REM10-2405SW/A/CTRL Datasheet |
| NAME | DESCRIPTION |
|---|---|
| Package Body Material: | PLASTIC/EPOXY |
| Maximum Line Regulation: | .2 % |
| Nominal Output Voltage: | 5 V |
| Maximum Time At Peak Reflow Temperature (s): | 5 |
| Trim or Adjustable Output (V): | NO |
| Protection(s): | SHORT CIRCUIT; OVER VOLTAGE; OVERLOAD |
| Width (mm): | 20.3 mm |
| Maximum Seated Height: | 10.9 mm |
| Maximum Output Current: | 2 A |
| Maximum Total Power Output: | 10 W |
| Surface Mount: | NO |
| No. of Outputs: | 1 |
| No. of Terminals: | 7 |
| Terminal Position: | DUAL |
| Package Style (Meter): | MICROELECTRONIC ASSEMBLY |
| Maximum Load Regulation: | .2 % |
| Technology: | HYBRID |
| JESD-30 Code: | R-PDMA-P7 |
| Package Shape: | RECTANGULAR |
| Terminal Form: | PIN/PEG |
| Maximum Operating Temperature: | 105 Cel |
| Package Code: | DMA |
| Minimum Output Voltage: | 4.95 V |
| Other Names: |
51000391 945-2240 |
| Minimum Input Voltage: | 9 V |
| Warm-Up Time: | .03 Seconds |
| Maximum Input Voltage: | 36 V |
| Maximum Output Voltage: | 5.05 V |
| Approvals (V): | ANSI, CSA, EAC, EN, IEC |
| Minimum Operating Temperature: | -40 Cel |
| No. of Functions: | 1 |
| Nominal Input Voltage: | 24 V |
| Other IC type: | DC-DC REGULATED POWER SUPPLY MODULE |
| Length: | 31.8 mm |
| Main Out Ripple Voltage: | .010605 Vrms |
| Peak Reflow Temperature (C): | 255 |
| Terminal Pitch: | 2.54 mm |
| Main Output Efficiency: | 86.5 % |
