STMicroelectronics - EMIF06-MSD03F3

4300-025LF by Cts is a Data Line Filter with FEED THROUGH CAPACITOR type. It has a Rated Voltage of 50V, Max Insertion Loss of 60dB, and Min Insulation Resistance of 10000 Mohm. Ideal for applications requiring noise filtering in data lines with a rated current of 5A.

TDK ACP3225-102-2P-T000 is a FERRITE CHIP filter with 2 functions, rated at 60V and 1.5A. With dimensions of L3.2xB2.5xH1.9 (mm), it's ideal for data line filtering applications requiring high impedance and insulation resistance up to 10 Mohm. Operating b/w -40°C to 85°C, this surface mount device offers low DC resistance of 0.1 ohm for efficient performance in various electronic systems.

Murata Manufacturing DLW43SH510XK2K is a FERRITE CHIP filter with 51uH inductance, 10 Mohm insulation resistance, and rated for 0.23A current. It has 4 terminals, operates b/w -40 to 125 °C, and is AEC-Q200 compliant. Ideal for data line filtering applications requiring surface mount installation.

Fair-rite Products' 2508056017Y2 is a chip bead data line filter with 2 terminals, operating b/w -55 to 125 °C. With dimensions of L2.0XB0.9XH1.25 (mm), it offers a max frequency of 1000 MHz and DC resistance of 0.1 ohm, suitable for surface mount applications in filtering frequencies from 100 MHz to reduce interference.

MI0805L301R-10 by Laird Technologies is a chip bead data line filter with 2 terminals, operating b/w -40 to 125 °C. With dimensions of L2XB1.25XH.9 (mm), it offers a frequency range from 25 MHz to 1000 MHz and an output impedance of 300 OHM. Ideal for surface mount applications, this ferrite chip filter has a max DC resistance of 0.06 ohm and rated current of 2 A.

Wurth Elektronik 744222 is a UL-approved data line filter with 2 functions, rated at 80V. With inductance of 1000uH and max DC resistance of 0.31 ohm, it operates b/w -40 to 125 °C. Ideal for applications requiring a surface mount filter with dimensions L9.2XB6.0XH5.0mm, such as electronic devices needing noise suppression on data lines.

DATA LINE FILTER; Maximum DC Resistance: .6 ohm; Mounting Type: THROUGH HOLE MOUNT; Height: 8.89 mm; No. of Functions: 2; Dimensions: L10.16XB5.08XH8.89 (mm)/L0.4XB0.2XH0.35 (inch);

Murata's BLM18RK601SN1D is a chip bead data line filter with 2 terminals, ideal for surface mount applications. Featuring a ferrite chip construction, it offers a max operating temperature of 125°C and DC resistance of 0.6 ohm. With dimensions of 1.6x0.8x0.8mm, this filter is suitable for maintaining an output impedance of 600 ohm at frequencies ranging from 100 MHz to TAPE AND REEL packaging method.

Murata Manufacturing's DLW31SN222SQ2L is a Data Line Filter with 2 functions, rated at 50V. It offers a max DC resistance of 1.2 ohm and an output impedance of 2200 ohm. This surface mount filter operates b/w -40 to 85 °C and is ideal for applications requiring high insulation resistance.

Murata Manufacturing's DLW31SH222SQ2L is a Data Line Filter with 2 functions, AEC-Q200 screening level, and 32V rated voltage. With dimensions of L3.2XB1.6XH1.9 (mm), it offers 10 Mohm min insulation resistance for automotive applications at temperatures ranging from -40 to 125 °C.

ACM4520-421-2P-T000 by TDK is a data line filter with 2 functions, rated voltage of 50V, and max operating temp of 85°C. It has insulation resistance of 10 Mohm and DC resistance of 0.055 ohm. Ideal for applications requiring noise suppression in electronic circuits.

HR2220V801R-10 by Laird Technologies is a chip bead data line filter with 2 terminals, operating b/w -55 to 125 °C. It offers an output impedance of 800 OHM, rated current of 8 A, and DC resistance of 0.01 ohm. Ideal for surface mount applications in filtering frequencies from 25 MHz to 1000 MHz.

Vishay Intertechnology's ILHB1206ER601V is a 2-terminal data line filter with FERRITE CHIP construction. It operates b/w -55 to 125 °C, has a DC resistance of 0.1 ohm, and output impedance of 600 OHM. Ideal for surface mount applications in electronics requiring noise suppression at frequencies up to 100 MHz.

Murata Manufacturing's DSS6NZ82A103Q55B is a 100V rated data line filter with 6A current capacity. It operates b/w -25°C to 85°C, measuring L8xB2.54xH7 mm in size. Ideal for applications requiring noise suppression in data lines, it offers a capacitance of 10000uF and through-hole mounting method.

TDK's ACM2012-900-2P-T001 is a Data Line Filter with 2 functions, AEC-Q200 screening. It has a rated voltage of 50V, max operating temp of 105°C, and DC resistance of 0.19 ohm. Ideal for applications requiring noise suppression in automotive electronics.

Murata Manufacturing's BLM18EG221SN1 is a FERRITE CHIP data line filter with 220 OHM output impedance, 2A rated current, and -55 to 125°C operating temperature range. Ideal for surface mount applications requiring effective noise suppression in electronic circuits.

NZF220DFT1G by Onsemi is a Data Line Filter with 2 functions and 5 terminals. Featuring FERRITE CHIP filter type, it has a width of 1.35mm and max DC resistance of 110 ohm. Ideal for applications requiring a compact surface mount solution with an output impedance of 50 OHM.

PA2745NLT by Pulse Electronics is a Data Line Filter with 2 functions and 4 terminals. It offers an inductance of 130uH, rated current of 5A, and max operating temperature of 130°C. Ideal for applications requiring surface mount filters for data lines with high current demands.

HI0805R800R-10 by Laird Technologies is a chip bead data line filter with 80 OHM output impedance. It operates b/w -40 to 125 °C, suitable for frequencies ranging from 25 MHz to 1000 MHz. With dimensions of L2.0XB1.25XH0.9 (mm), it is ideal for surface mount applications in various electronic devices.

Murata Manufacturing's DLP11SN900HL2L is a Data Line Filter with 2 functions, rated at 5V. It has a min insulation resistance of 100 Mohm and operates b/w -40 to 85 °C. Ideal for applications requiring data line filtering with dimensions of L1.25xB1.0xH0.82 mm and output impedance of 90 ohm at 0.15A current rating.