M28256-20WNS6T by STMicroelectronics | Memory ICs

Image shown is a representation only.

Manufacturer	STMicroelectronics
Manufacturer's Part Number	M28256-20WNS6T
Description	EEPROM; Temperature Grade: INDUSTRIAL; No. of Terminals: 28; Package Code: TSOP1; Package Shape: RECTANGULAR; Power Supplies (V): 3/3.3;
Datasheet	M28256-20WNS6T Datasheet
In Stock	3,365

NAME	DESCRIPTION
Package Body Material:	PLASTIC/EPOXY
Maximum Standby Current:	.00002 Amp
Organization:	32KX8
Output Characteristics:	3-STATE
Maximum Seated Height:	1.2 mm
Programming Voltage (V):	3
Minimum Supply Voltage (Vsup):	2.7 V
Sub-Category:	EEPROMs
Surface Mount:	YES
Maximum Supply Current:	15 mA
Command User Interface:	NO
Terminal Finish:	TIN LEAD
Maximum Write Cycle Time (tWC):	5 ms
No. of Terminals:	28
No. of Words:	32768 words
Terminal Position:	DUAL
Package Style (Meter):	SMALL OUTLINE, THIN PROFILE
Technology:	CMOS
JESD-30 Code:	R-PDSO-G28
Package Shape:	RECTANGULAR
Terminal Form:	GULL WING
Operating Mode:	ASYNCHRONOUS
Maximum Operating Temperature:	85 Cel
Endurance:	100000 Write/Erase Cycles
Package Code:	TSOP1
Width:	8 mm
Memory Density:	262144 bit
Toggle Bit:	YES
Memory IC Type:	EEPROM
JESD-609 Code:	e0
Minimum Operating Temperature:	-40 Cel
Memory Width:	8
Page Size (words):	64
No. of Functions:	1
Qualification:	Not Qualified
Package Equivalence Code:	TSSOP28,.53,22
Length:	11.8 mm
Maximum Access Time:	200 ns
No. of Words Code:	32K
Nominal Supply Voltage / Vsup (V):	3
Parallel or Serial:	PARALLEL
Terminal Pitch:	.55 mm
Temperature Grade:	INDUSTRIAL
Maximum Supply Voltage (Vsup):	3.6 V
Data Polling:	YES
Power Supplies (V):	3/3.3

Pricing (USD)

Qty.	Unit Price	Ext. Price
3,365	-	-

Vishay Intertechnology's BAV99 diode features a max forward voltage of 1.3V and a max output current of 0.15A, making it ideal for rectification applications. With a small outline package style and dual terminal position, this series-connected diode is designed for surface mount usage in various electronic circuits with an operating temperature range from -55°C to 150°C.

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): 240; Terminal Finish: TIN LEAD;

NUP2105LT1G by Onsemi is a Transient Suppression Device with 350W power dissipation, 29.1V breakdown voltage, and 44V clamping voltage. Commonly used in electronic circuits for surge protection due to its bidirectional polarity and silicon diode element material.

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.

TE Connectivity's CRG0805F10R is a 10 ohm fixed resistor with 1% tolerance and 0.125 W power dissipation. It features thick film technology, SMT package style, and matte tin over nickel terminal finish. Ideal for surface mount applications in electronics, offering a temperature coefficient of 200 ppm/°C and operating voltage of 150 V.

NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1 W; Maximum Collector Current (IC): .8 A; Terminal Form: WIRE;

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Drain Current (ID): .2 A; Transistor Application: SWITCHING;