NAND128W3A2CZA1T by STMicroelectronics | Memory ICs

Image shown is a representation only.

Manufacturer	STMicroelectronics
Manufacturer's Part Number	NAND128W3A2CZA1T
Description	FLASH; Temperature Grade: COMMERCIAL; No. of Terminals: 55; Package Code: TFBGA; Package Shape: RECTANGULAR; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED;
Datasheet	NAND128W3A2CZA1T Datasheet
In Stock	152

NAME	DESCRIPTION
Package Body Material:	PLASTIC/EPOXY
Organization:	16MX8
Maximum Time At Peak Reflow Temperature (s):	NOT SPECIFIED
Maximum Seated Height:	1.05 mm
Programming Voltage (V):	3
Minimum Supply Voltage (Vsup):	2.7 V
Surface Mount:	YES
No. of Terminals:	55
No. of Words:	16777216 words
Terminal Position:	BOTTOM
Package Style (Meter):	GRID ARRAY, THIN PROFILE, FINE PITCH
Technology:	CMOS
JESD-30 Code:	R-PBGA-B55
Package Shape:	RECTANGULAR
Terminal Form:	BALL
Operating Mode:	ASYNCHRONOUS
Maximum Operating Temperature:	70 Cel
Package Code:	TFBGA
Width:	8 mm
Memory Density:	134217728 bit
Memory IC Type:	FLASH
Minimum Operating Temperature:	0 Cel
Memory Width:	8
No. of Functions:	1
Type:	SLC NAND TYPE
Qualification:	Not Qualified
Length:	10 mm
Maximum Access Time:	35 ns
No. of Words Code:	16M
Nominal Supply Voltage / Vsup (V):	3
Peak Reflow Temperature (C):	NOT SPECIFIED
Parallel or Serial:	PARALLEL
Terminal Pitch:	.8 mm
Temperature Grade:	COMMERCIAL
Maximum Supply Voltage (Vsup):	3.6 V

Pricing (USD)

Qty.	Unit Price	Ext. Price
152	-	-

2N7002,215 by NXP Semiconductors is a small signal N-CHANNEL FET with a min DS breakdown voltage of 60V and max drain current of 0.3A. It is used for switching applications in enhancement mode, operates b/w -65 to 150 °C, and has a max power dissipation of 0.2W.

Vishay Intertechnology's LL4148 diode features a max reverse recovery time of 0.004 us, forward voltage of 1 V, and output current of 0.15 A. Ideal for rectification applications in electronics due to its high efficiency and low power dissipation capabilities.

Vishay Intertechnology's CRCW06031K00FKEAHP is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.33 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and operating voltage of 75 V.

BAV99WT1G by Onsemi is a series connected diode with 0.006 us reverse recovery time. It is a small outline rectifier diode with 70V peak reverse voltage, ideal for surface mount applications in electronics requiring fast switching and low forward voltage drop.

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

RECTIFIER DIODE; Surface Mount: NO; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .15 A;

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Diodes Inc.'s BSS138W-7-F is a N-channel FET with 50V DS breakdown voltage, ideal for switching applications. It features single configuration with built-in diode, Gull Wing terminals, and operates in enhancement mode. With 0.2A max drain current and 3.5 ohm RDS(on), it's UL recognized and suitable for small outline packages at temperatures ranging from -55 to 150°C.

Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Output Voltage-1: 5 V;

FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.