Supermicro Computer, Inc - MBD-X6DAL-XG-O

• 1 x X6DAL-XG Workstation Board
• 1 x ATX Floppy Cable
• 1 x ATA 66/100 IDE LP Cable
• 1 x SATA Cable 2ft. Amphenol
• 1 x Version 1.20 CD or later
• 1 x Motherboard I/O Shield
• 1 x Motherboard Manual
• 2 x CPU Mounting Plate

Chipset:

• The Intel E7525 chipset consists of the following components:

• The E7525 Memory Controller Hub (MCH)
• The 6300ESB I/O Controller Hub (ICH)
• The Intel PCI-X Hub (PXH)

Memory Controller Hub (MCH):

• Provides direct connection to two channels of registered DDR333 or DDR266 with a marched system bus address and data bandwidths of up to 2.67 GB/s (DDR 333) per channel
• Supports the new PCI Express high speed serial I/O interface for superior I/O bandwidth
• Interfaces with the ICH I/O Controller Hub via HI 1.5 Hub Interface
• Support connection of the MCH to a variety of other bridges that are compliant with the PCI Express Interface Specification, Rev. 1.0a, such as:

• 82801ER GLAN Adaptor
• The Dobson I/O processor
• H/W RAID controllers
• TCP/IP Off-load engines

6300ESB I/O Controller Hub:

• Provides the I/O subsystem with access to the rest of the system
• Integrates many I/O functions, including:

• 2-channel Ultra ATA/100 Bus Master IDE Controller
• Two Serial ATA (SATA) Host Controllers
• SM Bus 2.0 Controller
• LPC/Flash BIOS Interface
• PCI-X (66MHz)/PCI-Express (x16 at 4GB/s) Interface
• PCI 2.2 Interface
• System Management Controller

PCI-X Hub (PXH):

• Can be configured to support for 32- or 64-bit PCI devices running at 33 MHz, 66 MHz, 100 MHz, or 133 MHz
• Provides connection between a PCI Express interface and two independent PCI bus interfaces that can be configured for standard PCI 2.3 protocol, as well as the enhanced high-frequency PCI-X protocol.

Operating System Support:

• Supports 64-bit Operating Systems
• Supports 32-bit Operating Systems

X6DAL-XG Workstation Board supports single or dual Intel Xeon Nocona processors at a 8 00 MHz front side bus. Based upon Intel's NetBurst microarchitecture with EM64T support, the Nocona processor supports IA-32 and IA-64 software and includes features found in the Xeon processor such as Hyper Pipelined Technology, which includes a multi-stage pipeline, allowing the processor to operate at much higher core frequencies.

Packaged in a 604-pin Flip Chip Micro Pin Grid Array(FC-mPGA4) platform in a Zero Insertion Force(ZIF) socket (mPGA 604), the Nocona Processor (800 MHz) supports Hyper-Threading Technology and is ideal for high performance workstation and server environments with up to two processors on one system bus.