Supermicro Computer, Inc - MBD-X6DVA-EG-O

• 1 x X6DVA-EG Motherboard
• 1 x Manual for X6DVA-EG
• 1 x 9-pin Serial Port Cable
• 1 x ATX Floppy Cable
• 1 x ATA 66/100 IDE LP Cable
• 1 x 2ft. Amphenol, SATA Cable
• 1 x Version 1.20 CD or later
• 1 x Motherboard I/O Shield
• 1 x CPU mounting plate

Chipset:

• The Intel E7500 chipset consists of four major components:

• The Memory Controller Hub (MCH)
• The I/O Controller Hub (ICH)
• The PCI-X Hub (PXH)

Memory Controller Hub (MCH):

• Provides direct connection to two channels of registered DDR266, DDR333 with a marched system bus address and data bandwidths of up to 6.4GB/s
• Provides configurable x8 PCI Express interfaces which may alternatively be configured as two independent x4 PCI Express interfaces

I/O Controller Hub (ICH):

• Integrates many I/O functions, including:

• 2-channel Ultra ATA/100 Bus Master IDE Controller
• Two Serial ATA (SATA) Host Controllers
• LPC, Flash BIOS Interface
• PCI-X (66MHz) 1.0 Interface
• PCI 2.2 Interface
• System Management Controller

PCI-X Hub (PXH):

• Can be configured to support for 32- or 64-bit PCI devices running at 33 MHz, 66 MHz, 100 MHz, and 133 MHz

Operating System Support:

• Supports 64-bit Operating Systems
• Supports 32-bit Operating Systems

Error Detection:

• Corrects single-bit errors
• Detects double-bit errors (using ECC memory)
• Supports Intel x4 Single Device Data Correction (SDDC)

BIOS Features:

• Plug n Play
• SMBIOS 2.3
• APM 1.2
• DMI 2.1
• ACPI 1.0
• Note: Memory must be populated in pairs

X6DVA-EG Server Board supports single or dual Intel Xeon Nocona processors at a 800 MHz front side bus. It also supports up to 12 GB DDR 333 MHz memory or up to 24 GB DDR 266 MHz memory.