Taiyo Yuden - BKP1005HM221-T8

Murata Manufacturing's BLM18KG121TN1D is a chip bead data line filter with 2 terminals, operating b/w -55 to 125°C. With dimensions of 1.6x0.8x0.6mm, it offers a max DC resistance of 0.03 ohm and output impedance of 120 ohm at frequencies ranging from 100 MHz. Ideal for surface mount applications, this ferrite chip filter has a rated current of 3A and is commonly used in electronic devices requiring noise suppression on data lines.

The TDK MMZ1608B601CT is a 0603 chip bead data line filter with a max operating temperature of 125°C and min of -55°C. It has a max DC resistance of 0.4 ohm, output impedance of 600 ohm, and rated current of 0.5 A. Ideal for surface mount applications in electronic devices requiring noise suppression and signal filtering capabilities.

DATA LINE FILTER; Maximum DC Resistance: .01 ohm; Rated Current: 10 A; JESD-609 Code: e4; Additional Features: PI-TYPE CIRCUIT; Minimum Operating Temperature: -55 Cel;

Murata Manufacturing's DLW31SN222SQ2L is a Data Line Filter with 2 functions, rated at 50V. It offers a max DC resistance of 1.2 ohm and an output impedance of 2200 ohm. This surface mount filter operates b/w -40 to 85 °C and is ideal for applications requiring high insulation resistance.

Murata Manufacturing's DLW21HN670SQ2L is a data line filter with 2 functions, rated voltage of 50V, and insulation resistance of 10 Mohm. It operates b/w -40 to 85 °C and has dimensions of L2.0xB1.2xH0.9 mm. Ideal for applications requiring a DC resistance of 0.35 ohm and output impedance of 67 OHM in surface mount configurations.

Wurth Elektronik 744221 is a UL-approved data line filter with 2 functions, rated at 80V. With inductance of 2uH and max DC resistance of 0.42 ohm, it operates b/w -40 to 125 °C. Ideal for applications requiring surface mount filters with dimensions L9.2XB6.0XH5.0 mm, such as electronic devices needing noise suppression on data lines.

FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .1 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: 2 A;

Wurth Elektronik 742792031 is a FERRITE CHIP filter with 2 terminals, rated for 3A current. With dimensions of L2.0XB1.25XH0.9 (mm), it operates b/w -55 to 125 °C and has an output impedance of 300 OHM. Ideal for data line filtering applications due to its surface mount construction and frequency range of 100-200 MHz.

CM2021Y330R-10 by Laird Technologies is a data line filter with 2 functions and 4 terminals. It has a max DC resistance of 0.0008 ohm and an output impedance of 33 ohm. This surface mount filter is suitable for applications requiring a rated current of 15 A.

Murata Manufacturing's NFM21PC105B1A3D is a data line filter with 500 Mohm insulation resistance, 10V rated voltage, and 1000000uF capacitance. Ideal for applications requiring noise suppression in electronic circuits.

Murata Manufacturing's BLM31PG601SN1 is a FERRITE CHIP filter with 2 terminals, rated for 1.5A current and 600Ω output impedance. With dimensions of L3.2xB1.6xH1.1 mm, it operates b/w -55°C to 125°C, ideal for data line filtering in surface mount applications.

Wurth Elektronik 742792410 is a multi-layer FERRITE CHIP filter with dimensions L4.5XB1.6XH1.6 (mm). It operates b/w -55 to 125 °C, has a DC resistance of 0.01 ohm, and output impedance of 60 OHM. Ideal for data line filtering applications with a frequency range from 100 MHz to 1000 MHz.

The TDK MMZ1608Y152BTA00 is a chip bead data line filter with 2 terminals, rated for 0.3A current and 1500 ohm output impedance. It operates b/w -55°C to 125°C, with dimensions of 1.6x0.8x0.8mm (LxWxH). Ideal for surface mount applications in electronic devices requiring noise suppression and signal filtering capabilities.

Murata Manufacturing's BLM18PG471SZ1D is a FERRITE CHIP filter with 470 OHM output impedance, suitable for data line filtering applications. With AEC-Q200 screening and 1A rated current, it operates b/w -55 to 125 °C, making it ideal for automotive electronics. This surface mount chip has 2 terminals, measures 1.6mm in length and 0.8mm in width, with a max DC resistance of 0.2 ohm.

Murata Manufacturing's BLM15HG102SN1D is a chip bead data line filter with 2 terminals, operating b/w -55 to 125°C. With dimensions of 1x0.5x0.5mm, it offers a DC resistance of 1.1 ohm and an output impedance of 1000 ohm for frequencies ranging from 100MHz to 1000MHz. Ideal for surface mount applications in electronic devices requiring noise suppression on data lines.

The TDK ACT45B-110-2P-TL003 is a FERRITE CHIP filter with 2 functions, rated for 50V and 0.25A. With dimensions of L4.5XB3.2XH2.8 (mm), it offers high insulation resistance suitable for data line applications at temperatures ranging from -40 to 150 °C.

Wurth Elektronik 7427927121 is a FERRITE CHIP filter with 2 terminals, rated for 0.5A current. With dimensions of L1.0XB0.5XH0.5 (mm), it operates b/w -55 to 125 °C and has a max DC resistance of 0.8 ohm. Ideal for data line filtering applications due to its surface mounting type and output impedance of 220 OHM.

BLM15AX221SN1D by Murata Manufacturing is a chip bead data line filter with 2 terminals. It has a max operating temperature of 125°C and a min operating temperature of -55°C. This ferrite chip filter has dimensions of L1.0XB0.5XH0.5 (mm) and is commonly used in surface mount applications for impedance matching and noise suppression in data lines.

Murata's DLW5BTN102SQ2L is a Data Line Filter with 10 Mohm Insulation Resistance, 50V Rated Voltage, and 2A Rated Current. It has 4 terminals, operates b/w -40 to 85 °C, and offers an output impedance of 1000 ohm. Ideal for applications requiring noise suppression in data lines.

The TDK MPZ2012S601A is an 0805 chip bead data line filter with a ferrite chip construction. It operates b/w -55°C to 125°C, has a DC resistance of 0.1 ohm, and output impedance of 600 ohm. Ideal for applications requiring noise suppression in data lines at frequencies up to 100 MHz.