6-1617758-8 by TE Connectivity | Relays

Image shown is a representation only.

Manufacturer	TE Connectivity
Manufacturer's Part Number	6-1617758-8
Description	POWER/SIGNAL RELAY; Mounting Feature: PANEL MOUNT; Relay Action: MOMENTARY; Relay Function: DPDT-CO; Coil or Input Supply Type: DC; Maximum DC Contact Current: 5 A;
Datasheet	6-1617758-8 Datasheet

NAME	DESCRIPTION
Maximum DC Contact Current:	5 A
Relay Function:	DPDT-CO
Contact or Output Supply Type:	AC/DC
Maximum Contact DC Rating (R Load):	5A@6VDC
Relay Type:	Power/Signal Relay
Coil or Input Supply Type:	DC
Relay Form:	2 Form C
Termination Type:	Solder Hook
Operate Time:	6 ms
Release Time:	6 ms
Maximum Operating Temperature:	125 °C (257 °F)
Maximum DC Coil Current:	56 mA
Maximum AC Contact Current:	5 A
End Contact Material:	Silver Cadmium Oxide
Maximum DC Contact Voltage:	6 V
Coil Resistance:	500 Ω
Sealing:	Hermetically Sealed
Minimum Operating Temperature:	-70 °C (-94 °F)
Mounting Feature:	Panel Mount
Relay Action:	Momentary
Body Width:	10.41 in (264.414 mm)
Maximum DC Coil Voltage:	28 V
Physical Dimension:	0.81 x 0.41 x 0.64 in (20.57 x 10.41 x 16.26 mm)
Body Height:	0.64 in (16.26 mm)
Body Length/Diameter:	0.81 in (20.57 mm)
Coil Power (mW):	1.568 W

Popular Products

Abracon's ABS10-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and wearables due to its compact size and low power consumption.

LM2675M-ADJ/NOPB by Texas Instruments is a voltage-mode switching regulator with 1A output current, 37V max output voltage, and 260kHz max switching frequency. Ideal for automotive applications due to its -40°C to 125°C operating temperature range and compact small outline package design.

FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;

Vishay Intertechnology's SS14 is a Schottky rectifier diode with a max forward voltage of 0.5V and output current of 1A. Operating at up to 125°C, it has a repetitive peak reverse voltage of 40V. Ideal for surface mount applications, it suits various electronic circuits requiring efficient rectification and low forward voltage drop.

SN65HVD230DR by Texas Instruments is a BICMOS technology interface circuit with 1Mbps data rate, suitable for industrial applications. It operates at 3.3V, has 8 terminals in a small outline package, and can withstand temperatures from -40 to 85°C.

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

CONNECTOR ACCESSORY; IEC Conformity: NO; Alternate Contact Sources: MILITARY; MIL Conformity: YES; Contact Gender: MALE; MIL-Connector Accessory Name: CONTACT;

KSZ9031RNXIC by Microchip Technology is a network interface chip with 1 transceiver. It operates at a data rate of 1000 Mbps and has a nominal voltage of 1.2V. This chip is commonly used in industrial applications requiring Ethernet connectivity.

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Package Shape: ROUND;