A103SYZB04 by TE Connectivity | Switches

Image shown is a representation only.

Manufacturer	TE Connectivity
Manufacturer's Part Number	A103SYZB04
Description	TOGGLE SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): STANDARD TYPE; Contact Function: ON-OFF-ON; Body Height: 8.89 mm;
Datasheet	A103SYZB04 Datasheet

NAME	DESCRIPTION
Maximum DC Contact Current:	.4 A
Center Contact Plating:	GOLD
Length (Bushing):	.35 inch
Type (Actuator):	STANDARD TYPE
Maximum AC Contact Voltage:	20 V
Finish (Actuator):	NICKEL
Switch Action:	LATCHED
Termination Type:	WIRE
Electrical Life:	6000 Cycle(s)
Maximum Operating Temperature:	85 Cel
Contact Resistance:	10 mohm
Insulation Resistance:	1000000000 ohm
Maximum AC Contact Current:	.4 A
End Contact Material:	COPPER ALLOY
Other Names:	2266-A103SYZB04
Maximum DC Contact Voltage:	20 V
DC Maximum Rating R Load (Contact):	.02A@20VDC
Dielectric Withstand Volts (V):	1000
Contact Function:	ON-OFF-ON
Switch Type:	TOGGLE SWITCH
AC Maximum Rating R Load (Contact):	.02A@20VAC
Sealing:	EPOXY TERMINAL SEALED
Minimum Operating Temperature:	-30 Cel
Mounting Feature:	PANEL MOUNT
Body Width:	6.86 inch
Switch Function:	SPDT
Body Height:	8.89 mm
Body Length/Diameter:	12.7 mm

Popular Products

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Transistor Application: SWITCHING; JESD-609 Code: e3;

FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.

Vishay Intertechnology's CRCW04020000Z0ED is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating b/w -55 to 155 °C, it suits SMT applications in automotive electronics due to AEC-Q200 compliance and 0.063 W power dissipation.

Souriau-sunbank's M39029/56351 is a CRIMP contact type backshell accessory compliant with MIL-DTL-38999. It features FEMALE gender contacts, compatible with M39029/58363 mating contacts. The insertion and removal tools required are M81969/14-10 and M22520/2-10 respectively, making it ideal for military connector applications.

PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 20 ppm; Aging: 3 PPM/YEAR; Load Capacitance: 12.5 pF; Nominal Operating Frequency: .032768 MHz;

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain-Source On Resistance: 3.5 ohm; Terminal Finish: Tin/Lead (Sn/Pb);

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Finish: Matte Tin (Sn) - annealed; Transistor Element Material: SILICON;

TE Connectivity 350766-1 is a rectangular power connector with 0.25" mating contact pitch, rated for 600V and operating temperatures from -55 to 105°C. It has a durable design with POLYAMIDE insulator material, suitable for commercial applications requiring secure crimp termination in cable mounting setups.

BSS138-TP by Micro Commercial Components is a N-channel small signal FET with a min DS breakdown voltage of 50V and max drain current of 0.22A. It is commonly used in applications requiring enhancement mode operation, such as power management and switching circuits.

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3 ohm; Minimum DS Breakdown Voltage: 50 V; Terminal Form: GULL WING;