Image shown is a representation only.
| Manufacturer | TE Connectivity |
|---|---|
| Manufacturer's Part Number | SSA22G |
| Description | SLIDE SWITCH; Mounting Feature: THROUGH HOLE-STRAIGHT; Switch Function: DPDT; Type (Actuator): EXTENDED TOP TYPE; Termination Type: SOLDER; Sealing: EPOXY TERMINAL SEALED; |
| Datasheet | SSA22G Datasheet |
| NAME | DESCRIPTION |
|---|---|
| Maximum DC Contact Current: | .02 A |
| Center Contact Plating: | GOLD |
| Type (Actuator): | EXTENDED TOP TYPE |
| Maximum AC Contact Voltage: | 20 V |
| Terminal Finish: | Gold (Au) |
| Switch Action: | LATCHED |
| Termination Type: | SOLDER |
| Electrical Life: | 10000 Cycle(s) |
| Maximum Operating Temperature: | 70 Cel |
| Material (Actuator): | POLYAMIDE |
| Contact Resistance: | 30 mohm |
| Insulation Resistance: | 100000000 ohm |
| Maximum AC Contact Current: | .02 A |
| Angle (Actuator): | 0 deg |
| Maximum DC Contact Voltage: | 20 V |
| DC Maximum Rating R Load (Contact): | .02A@20VDC |
| Dielectric Withstand Volts (V): | 500VAC |
| PCB Hole Count: | 6 |
| Maximum Operating Force: | 3.43 N |
| DC Maximum Power Rating R Load (Contact): | 0.4VA@20VDC |
| Switch Type: | SLIDE SWITCH |
| AC Maximum Rating R Load (Contact): | .02A@20VAC |
| Sealing: | EPOXY TERMINAL SEALED |
| JESD-609 Code: | e4 |
| Minimum Operating Temperature: | -20 Cel |
| Mounting Feature: | THROUGH HOLE-STRAIGHT |
| Body Width: | 5.5 inch |
| Switch Function: | DPDT |
| Contact Timing: | BREAK-BEFORE-MAKE |
| Terminal Length: | .118 inch |
| Length (Actuator): | .079 inch |
| End Contact Plating: | GOLD |
| Insulator Material: | POLYESTER |
| Body Height: | 3.5 mm |
| Body Length/Diameter: | 9 mm |
| Washability: | SOLVENT |
