8 Comparators 2,400+

Reset All

Part	Manufacturer	Amplifier Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Maximum Negative Supply Voltage Limit	Maximum Input Offset Voltage	Maximum Average Bias Current (IIB)	Surface Mount	No. of Functions	Technology	Screening Level	Maximum Supply Current	Nominal Negative Supply Voltage (Vsup)	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Sub-Category	Maximum Supply Voltage Limit	Terminal Pitch	Maximum Operating Temperature	Maximum Bias Current (IIB) @25C	Nominal Response Time	Output Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length
LM2903HYDT	STMicroelectronics	Comparator	Automotive	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	0 V	15 mV	400 nA	Yes	2	BIPOLAR	AEC-Q100	2.5 mA	0 V	Tape And Reel	5 V	±1/±18/2/36 V	Small Outline	SOP8,.25	Comparators	36 V	0.05 in (1.27 mm)	150 °C (302 °F)	250 nA	1.3 µs	Open-Collector	-40 °C (-40 °F)	Nickel/Palladium/Gold	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4	30 s	260 °C (500 °F)	0.193 in (4.9 mm)
LM2903QDRG4Q1	Texas Instruments	Comparator	Automotive	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	0 V	7 mV	-500 nA	Yes	2	BIPOLAR	AEC-Q100	1 mA	0 V	Tape And Reel	5 V	5/30 V	Small Outline	SOP8,.25	Comparators	36 V	0.05 in (1.27 mm)	125 °C (257 °F)	50 nA	1.3 µs	Open-Collector	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4	30 s	260 °C (500 °F)	0.193 in (4.9 mm)
LM2903ST	STMicroelectronics	Comparator		Gull Wing	8	HTSSOP	Square	Plastic/Epoxy		15 mV	400 nA	Yes	2	BIPOLAR		2.5 mA		Tape And Reel	5 V		Small Outline, Heat Sink/Slug, Thin Profile, Shrink Pitch	TSOP8,.19	Comparators	36 V	0.026 in (0.65 mm)	125 °C (257 °F)	250 nA	1.3 µs	Open-Collector	-40 °C (-40 °F)		Dual	S-PDSO-G8		0.043 in (1.1 mm)	0.118 in (3 mm)					0.118 in (3 mm)
LM2903VQDRG4Q1	Texas Instruments	Comparator	Automotive	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	0 V	7 mV	-500 nA	Yes	2	BIPOLAR	AEC-Q100	1 mA	0 V	Tape And Reel	5 V	5/32 V	Small Outline	SOP8,.25	Comparators	36 V	0.05 in (1.27 mm)	125 °C (257 °F)	50 nA	1.3 µs	Open-Collector	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4	30 s	260 °C (500 °F)	0.193 in (4.9 mm)
LM2903YQ3T	STMicroelectronics	Comparator		No Lead	8	HVSON	Square			15 mV	400 nA	Yes	2	BIPOLAR	AEC-Q100	2.5 mA		Tape And Reel	5 V		Small Outline, Heat Sink/Slug, Very Thin Profile	SOLCC8,.08,20	Comparators	36 V	0.02 in (0.5 mm)	125 °C (257 °F)	250 nA	1.3 µs	Open-Collector	-40 °C (-40 °F)		Dual	S-XDSO-N8	1	0.031 in (0.8 mm)	0.079 in (2 mm)					0.079 in (2 mm)
LM393PS	Texas Instruments	Comparator	Commercial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	0 V	9 mV	-400 nA	Yes	2	BIPOLAR		2.5 mA	0 V		5 V	5 V	Small Outline	SOP8,.3	Comparators	36 V	0.05 in (1.27 mm)	70 °C (158 °F)	250 nA	1.3 µs	Open-Collector	0 °C (32 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.079 in (2 mm)	0.209 in (5.3 mm)	No	e4	30 s	260 °C (500 °F)	0.244 in (6.2 mm)
LM393PSLE	Texas Instruments	Comparator	Commercial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy		9 mV	-400 nA	Yes	2	BIPOLAR		2.5 mA			5 V	5 V	Small Outline	SOP8,.3	Comparators	36 V	0.05 in (1.27 mm)	70 °C (158 °F)	250 nA	1.3 µs	Open-Collector	0 °C (32 °F)		Dual	R-PDSO-G8		0.079 in (2 mm)	0.209 in (5.3 mm)	No				0.244 in (6.2 mm)
LMV393IPWE4	Texas Instruments	Comparator	Industrial	Gull Wing	8	TSSOP	Rectangular	Plastic/Epoxy		9 mV	400 nA	Yes	2	BIPOLAR		250 μA			5 V	3/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.25	Comparators	5.5 V	0.026 in (0.65 mm)	85 °C (185 °F)	250 nA	600 ns	Open-Collector	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.047 in (1.2 mm)	0.118 in (3 mm)	No	e4	30 s	260 °C (500 °F)	0.173 in (4.4 mm)
LMV393IPWG4	Texas Instruments	Comparator	Automotive	Gull Wing	8	TSSOP	Rectangular	Plastic/Epoxy		9 mV	400 nA	Yes	2	BIPOLAR		300 μA		Tube	5 V	3/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.25	Comparators	5.5 V	0.026 in (0.65 mm)	125 °C (257 °F)	250 nA	600 ns	Open-Collector	-40 °C (-40 °F)	Nickel/Palladium/Gold	Dual	R-PDSO-G8	1	0.047 in (1.2 mm)	0.118 in (3 mm)	No	e4		260 °C (500 °F)	0.173 in (4.4 mm)
LMV393IPWRE4	Texas Instruments	Comparator	Automotive	Gull Wing	8	TSSOP	Rectangular	Plastic/Epoxy		9 mV	400 nA	Yes	2	BIPOLAR		250 μA			5 V	3/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.25	Comparators	5.5 V	0.026 in (0.65 mm)	125 °C (257 °F)	250 nA	600 ns	Open-Collector	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.047 in (1.2 mm)	0.118 in (3 mm)	No	e4	30 s	260 °C (500 °F)	0.173 in (4.4 mm)
LP211DRE4	Texas Instruments	Comparator	Other	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	-18 V	10 mV	150 nA	Yes	1	BIPOLAR		300 μA	-15 V	Tape And Reel	15 V	±15 V	Small Outline	SOP8,.25	Comparators	18 V	0.05 in (1.27 mm)	85 °C (185 °F)	100 nA	1.2 µs	Open-Collector, Open-Emitter	-25 °C (-13 °F)	Nickel/Palladium/Gold	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4		260 °C (500 °F)	0.193 in (4.9 mm)
LP211DRG4	Texas Instruments	Comparator	Other	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	-18 V	7.5 mV	150 nA	Yes	1			300 μA	-15 V	Tape And Reel	15 V	±15 V	Small Outline	SOP8,.25	Comparators	18 V	0.05 in (1.27 mm)	85 °C (185 °F)	100 nA	1.2 µs	Open-Collector	-25 °C (-13 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4	30 s	260 °C (500 °F)	0.193 in (4.9 mm)
LT1018CN8#PBF	Analog Devices	Comparator	Commercial	Through-Hole	8	DIP	Rectangular	Plastic/Epoxy	-20 V	1.4 mV	100 nA	No	2				0 V		4.5 V		In-Line		Comparators	40 V	0.1 in (2.54 mm)	70 °C (158 °F)			Open-Collector	0 °C (32 °F)	Matte Tin	Dual	R-PDIP-T8	1	0.155 in (3.937 mm)	0.3 in (7.62 mm)	No	e3	30 s	260 °C (500 °F)
LT1116CS8#TRPBF	Analog Devices	Comparator	Commercial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	-7 V	3.5 mV	20 uA	Yes	1				-5 V	Tape And Reel	5 V		Small Outline		Comparators	7 V	0.05 in (1.27 mm)	70 °C (158 °F)		12 ns		0 °C (32 °F)	Matte Tin	Dual	R-PDSO-G8	1	0.069 in (1.752 mm)	0.154 in (3.899 mm)	No	e3	30 s	260 °C (500 °F)	0.193 in (4.9025 mm)
LT1671CMS8#TRPBF	Analog Devices	Comparator	Commercial	Gull Wing	8	TSSOP	Square	Plastic/Epoxy	-7 V	4 mV	350 nA	Yes	1				-5 V	Tape And Reel	5 V		Small Outline, Thin Profile, Shrink Pitch		Comparators	7 V	0.026 in (0.65 mm)	70 °C (158 °F)		85 ns		0 °C (32 °F)	Matte Tin	Dual	S-PDSO-G8	1	0.046 in (1.17 mm)	0.118 in (3 mm)	No	e3	30 s	260 °C (500 °F)	0.118 in (3 mm)
LT1671CS8#PBF	Analog Devices	Comparator	Commercial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	-7 V	4 mV	350 nA	Yes	1				-5 V		5 V		Small Outline		Comparators	7 V	0.05 in (1.27 mm)	70 °C (158 °F)		85 ns		0 °C (32 °F)	Matte Tin	Dual	R-PDSO-G8	1	0.069 in (1.752 mm)	0.154 in (3.899 mm)	No	e3	30 s	260 °C (500 °F)	0.193 in (4.9025 mm)
MAX907CSA	Maxim Integrated	Comparator	Commercial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy		3.5 mV	500 nA	Yes	2	BIPOLAR		1.2 mA			5 V	5 V	Small Outline	SOP8,.25	Comparators	6 V	0.05 in (1.27 mm)	70 °C (158 °F)	300 nA	45 ns		0 °C (32 °F)	Tin Lead	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e0	20 s	240 °C (464 °F)	0.193 in (4.9 mm)
MAX907CSA+	Analog Devices	Comparator	Commercial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy		3 mV	500 nA	Yes	2	BIPOLAR		1 mA			5 V	5 V	Small Outline	SOP8,.25	Comparators	6 V	0.05 in (1.27 mm)	70 °C (158 °F)	300 nA	45 ns		0 °C (32 °F)	Matte Tin - annealed	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e3	30 s	260 °C (500 °F)	0.193 in (4.9 mm)
MAX921ESA/GH9	Maxim Integrated	Comparator		Gull Wing	8	SOP	Rectangular	Plastic/Epoxy		10 mV		Yes	1			4 μA			3 V		Small Outline	SOP8,.25	Comparators	12 V	0.05 in (1.27 mm)	85 °C (185 °F)		14 µs		-40 °C (-40 °F)		Dual	R-PDSO-G8		0.069 in (1.75 mm)	0.154 in (3.9 mm)					0.193 in (4.9 mm)
MAX976ESA	Maxim Integrated	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy		3 mV	300 nA	Yes	2	CMOS		1.3 mA			5 V	3/5 V	Small Outline	SOP8,.25	Comparators	6 V	0.05 in (1.27 mm)	85 °C (185 °F)	300 nA	28 ns	Push-Pull	-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e0	20 s	240 °C (464 °F)	0.193 in (4.9 mm)
MAX976ESA+	Analog Devices	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy		3 mV	300 nA	Yes	2	CMOS		650 μA			5 V	3/5 V	Small Outline	SOP8,.25	Comparators	6 V	0.05 in (1.27 mm)	85 °C (185 °F)	300 nA	28 ns	Push-Pull	-40 °C (-40 °F)	Matte Tin - annealed	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e3	30 s	260 °C (500 °F)	0.193 in (4.9 mm)
PTLV1812QDRQ1	Texas Instruments	Comparator		Gull Wing	8	SOP	Rectangular	Plastic/Epoxy		4 mV	1.2 nA	Yes	2		AEC-Q100	20 μA		Tape And Reel	12 V		Small Outline	SOP8,.23		42 V	0.05 in (1.27 mm)	125 °C (257 °F)		420 ns	Push-Pull	-40 °C (-40 °F)		Dual	R-PDSO-G8		0.069 in (1.75 mm)	0.153 in (3.895 mm)					0.193 in (4.905 mm)
TL3016CPWR	Texas Instruments	Comparator	Commercial	Gull Wing	8	TSSOP	Rectangular	Plastic/Epoxy	-7 V	3 mV	10 uA	Yes	1	BIPOLAR		12.5 mA	-5 V	Tape And Reel	5 V	±5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.25	Comparators	7 V	0.026 in (0.65 mm)	70 °C (158 °F)	10 uA	7.8 µs		0 °C (32 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.047 in (1.2 mm)	0.118 in (3 mm)	No	e4	30 s	260 °C (500 °F)	0.173 in (4.4 mm)
TL3116CPWRG4	Texas Instruments	Comparator	Commercial	Gull Wing	8	TSSOP	Rectangular	Plastic/Epoxy	-7 V	3.5 mV	1.2 uA	Yes	1	BIPOLAR		14.7 mA	-5 V		5 V	5/±5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.25	Comparators	7 V	0.026 in (0.65 mm)	70 °C (158 °F)	1.1 uA	9.9 ns		0 °C (32 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.047 in (1.2 mm)	0.118 in (3 mm)	No	e4	30 s	260 °C (500 °F)	0.173 in (4.4 mm)
TL3116IDR	Texas Instruments	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	-7 V	3 mV	1.5 uA	Yes	1	BIPOLAR		14.7 mA	-5 V	Tape And Reel	5 V	5/±5 V	Small Outline	SOP8,.25	Comparators	7 V	0.05 in (1.27 mm)	85 °C (185 °F)	1.1 uA	9.9 ns		-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4	30 s	260 °C (500 °F)	0.193 in (4.9 mm)
TLC372CP	Texas Instruments	Comparator	Commercial	Through-Hole	8	DIP	Rectangular	Plastic/Epoxy		6.5 mV	600 pA	No	2	CMOS		300 μA		Tube	5 V	5 V	In-Line	DIP8,.3	Comparators	18 V	0.1 in (2.54 mm)	70 °C (158 °F)	30 pA	650 ns	Open-Collector	0 °C (32 °F)	Nickel/Palladium/Gold	Dual	R-PDIP-T8		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No	e4			0.386 in (9.81 mm)
TLC393CDRG4	Texas Instruments	Comparator	Commercial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy		6.5 mV	600 pA	Yes	2	CMOS		50 μA			5 V	5 V	Small Outline	SOP8,.25	Comparators	18 V	0.05 in (1.27 mm)	70 °C (158 °F)	600 pA	2.5 µs	Open-Drain	0 °C (32 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4	30 s	260 °C (500 °F)	0.193 in (4.9 mm)
TLV3402IDRG4	Texas Instruments	Comparator	Automotive	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	0 V	4.4 mV	1.5 nA	Yes	2			1.28 μA	0 V	Tape And Reel	5 V	±1.35/±8/2.7/16 V	Small Outline	SOP8,.25	Comparators	17 V	0.05 in (1.27 mm)	125 °C (257 °F)	100 pA	175 µs	Open-Drain	-40 °C (-40 °F)	Nickel/Palladium/Gold	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4		260 °C (500 °F)	0.193 in (4.9 mm)
TLV3491AID	Texas Instruments	Comparator	Automotive	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy		15 mV	10 pA	Yes	1	CMOS		1.2 μA		Tube	5 V	2/5 V	Small Outline	SOP8,.25	Comparators	5.5 V	0.05 in (1.27 mm)	125 °C (257 °F)	10 pA	12 µs	Push-Pull	-40 °C (-40 °F)	Nickel/Palladium/Gold	Dual	R-PDSO-G8	2	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4		260 °C (500 °F)	0.193 in (4.9 mm)
TLV3491AIDG4	Texas Instruments	Comparator	Automotive	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy		15 mV	10 pA	Yes	1	CMOS		1.2 μA		Tube	5 V	2/5 V	Small Outline	SOP8,.25	Comparators	5.5 V	0.05 in (1.27 mm)	125 °C (257 °F)	10 pA	12 µs	Push-Pull	-40 °C (-40 °F)	Nickel/Palladium/Gold	Dual	R-PDSO-G8	2	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4		260 °C (500 °F)	0.193 in (4.9 mm)
TLV7211IDR	Texas Instruments	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	0 V	18 mV	0.04 pA	Yes	1	CMOS		14 μA	0 V	Tape And Reel	5 V	3/15 V	Small Outline	SOP8,.25	Comparators	16 V	0.05 in (1.27 mm)	85 °C (185 °F)	0.04 pA	10 µs	Push-Pull	-40 °C (-40 °F)	Nickel/Palladium/Gold	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4		260 °C (500 °F)	0.193 in (4.9 mm)
LMC6772BIMX/NOPB	Texas Instruments	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	0 V	18 mV	0.4 pA	Yes	2	CMOS		20 μA	0 V	Tape And Reel	5 V	2.7/15 V	Small Outline	SOP8,.25	Comparators	16 V	0.05 in (1.27 mm)	85 °C (185 °F)	0.4 pA	4 µs	Open-Collector	-40 °C (-40 °F)	Matte Tin	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e3		260 °C (500 °F)	0.193 in (4.9 mm)
LMC7215IM/NOPB	Texas Instruments	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	0 V	8 mV	1 nA	Yes	1	CMOS		1 μA	0 V	Tube	2.7 V	2.7/5 V	Small Outline	SOP8,.25	Comparators	10 V	0.05 in (1.27 mm)	85 °C (185 °F)	0.05 pA	17 µs	Push-Pull	-40 °C (-40 °F)	Matte Tin	Dual	R-PDSO-G8	1	0.069 in (1.753 mm)	0.154 in (3.899 mm)	No	e3		260 °C (500 °F)	0.193 in (4.902 mm)
LMC7215IMX/NOPB	Texas Instruments	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	0 V	8 mV	1 nA	Yes	1	CMOS		1 μA	0 V	Tape And Reel	2.7 V	2.7/5 V	Small Outline	SOP8,.25	Comparators	10 V	0.05 in (1.27 mm)	85 °C (185 °F)	0.05 pA	17 µs	Push-Pull	-40 °C (-40 °F)	Matte Tin	Dual	R-PDSO-G8	1	0.069 in (1.753 mm)	0.154 in (3.899 mm)	No	e3		260 °C (500 °F)	0.193 in (4.902 mm)
LT1018IS8#PBF	Analog Devices	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	-20 V	1.4 mV	100 nA	Yes	2				0 V		4.5 V		Small Outline		Comparators	40 V	0.05 in (1.27 mm)	85 °C (185 °F)			Open-Collector	-40 °C (-40 °F)	Matte Tin	Dual	R-PDSO-G8	1	0.069 in (1.752 mm)	0.154 in (3.899 mm)	No	e3	30 s	260 °C (500 °F)	0.193 in (4.9025 mm)
LTC1442IS8#TRPBF	Analog Devices	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	-0.3 V	10 mV		Yes	2	CMOS			0 V	Tape And Reel	3 V		Small Outline		Comparators	12 V	0.05 in (1.27 mm)	85 °C (185 °F)		14 µs		-40 °C (-40 °F)	Matte Tin	Dual	R-PDSO-G8	1	0.069 in (1.752 mm)	0.154 in (3.899 mm)	No	e3	30 s	260 °C (500 °F)	0.193 in (4.9025 mm)
LTC1540CDD#PBF	Analog Devices	Comparator	Commercial	No Lead	8	HVSON	Square	Plastic/Epoxy	0 V	15 mV		Yes	1				0 V		3 V		Small Outline, Heat Sink/Slug, Very Thin Profile		Comparators	12 V	0.02 in (0.5 mm)	70 °C (158 °F)		70 µs		0 °C (32 °F)	Matte Tin	Dual	S-PDSO-N8	1	0.033 in (0.85 mm)	0.118 in (3 mm)	No	e3	30 s	260 °C (500 °F)	0.118 in (3 mm)
LTC1843CS8#PBF	Analog Devices	Comparator	Commercial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy		10 mV		Yes	2	CMOS					3 V		Small Outline		Comparators		0.05 in (1.27 mm)	70 °C (158 °F)		5 µs	Open-Drain	0 °C (32 °F)	Matte Tin	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e3	30 s	260 °C (500 °F)	0.193 in (4.9 mm)
AD790JN	Analog Devices	Comparator	Commercial	Through-Hole	8	DIP	Rectangular	Plastic/Epoxy	-18 V	1.5 mV	6.5 uA	No	1	BIPOLAR			-15 V		15 V	5,5/±15 V	In-Line	DIP8,.3	Comparators	18 V	0.1 in (2.54 mm)	70 °C (158 °F)	5 uA	45 ns	Push-Pull	0 °C (32 °F)	Tin Lead	Dual	R-PDIP-T8		0.175 in (4.44 mm)	0.3 in (7.62 mm)	No	e0
LT1720CMS8#PBF	Analog Devices	Comparator	Commercial	Gull Wing	8	TSSOP	Square	Plastic/Epoxy		4.5 mV	-6 uA	Yes	2	BIPOLAR					5 V		Small Outline, Thin Profile, Shrink Pitch		Comparators	7 V	0.026 in (0.65 mm)	70 °C (158 °F)		7 ns	Push-Pull	0 °C (32 °F)	Matte Tin	Dual	S-PDSO-G8	1	0.043 in (1.1 mm)	0.118 in (3 mm)	No	e3	30 s	260 °C (500 °F)	0.118 in (3 mm)
ADCMP392ARZ	Analog Devices	Comparator	Automotive	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy		5 mV	80 nA	Yes	2						5 V		Small Outline		Comparators	6 V	0.05 in (1.27 mm)	125 °C (257 °F)		9.7 µs	Open-Drain	-40 °C (-40 °F)	Matte Tin	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)		e3	30 s	260 °C (500 °F)	0.193 in (4.9 mm)
AS393P-E1	Diodes Incorporated	Comparator	Industrial	Through-Hole	8	DIP	Rectangular			7 mV	400 nA	No	2	BIPOLAR		3 mA			5 V	±1/±18/2/36 V	In-Line	DIP8,.3	Comparators	40 V	0.1 in (2.54 mm)	85 °C (185 °F)	250 nA	1.3 µs	Open-Collector	-40 °C (-40 °F)	Matte Tin	Dual	R-XDIP-T8		0.17 in (4.31 mm)	0.3 in (7.62 mm)	No	e3		260 °C (500 °F)	0.362 in (9.2 mm)
BA2903YF-CE2	ROHM	Comparator	Automotive	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy		5 mV	275 nA	Yes	2	BIPOLAR	AEC-Q100	2.5 mA		Tape And Reel	5 V	±1/±18/2/36 V	Small Outline	SOP8,.25	Operational Amplifiers	36 V	0.05 in (1.27 mm)	125 °C (257 °F)	250 nA	1.3 µs		-40 °C (-40 °F)	Tin Copper	Dual	R-PDSO-G8		0.067 in (1.71 mm)	0.173 in (4.4 mm)	No	e2			0.197 in (5 mm)
LTC1440CMS8#PBF	Analog Devices	Comparator	Commercial	Gull Wing	8	TSSOP	Square	Plastic/Epoxy	-0.3 V	10 mV		Yes	1	CMOS			0 V		3 V		Small Outline, Thin Profile, Shrink Pitch		Comparators	12 V	0.026 in (0.65 mm)	70 °C (158 °F)		14 µs		0 °C (32 °F)	Matte Tin	Dual	S-PDSO-G8	1	0.043 in (1.1 mm)	0.118 in (3 mm)	No	e3	30 s	260 °C (500 °F)	0.118 in (3 mm)
BA2903YFVM-MGTR	ROHM	Comparator	Automotive	Gull Wing	8	VSSOP	Rectangular	Plastic/Epoxy		15 mV	500 nA	Yes	2	BIPOLAR				Tape And Reel	5 V		Small Outline, Very Thin Profile, Shrink Pitch		Comparators	36 V	0.026 in (0.65 mm)	125 °C (257 °F)		1.3 µs	Open-Collector	-40 °C (-40 °F)		Dual	R-PDSO-G8		0.035 in (0.9 mm)	0.11 in (2.8 mm)					0.114 in (2.9 mm)
UA311TC	Fairchild Semiconductor	Comparator	Commercial	Through-Hole	8	DIP	Rectangular	Plastic/Epoxy		10 mV		No		BIPOLAR			-15 V		15 V	±15 V	In-Line	DIP8,.3	Comparators		0.1 in (2.54 mm)	70 °C (158 °F)				0 °C (32 °F)	Tin Lead	Dual	R-PDIP-T8	2A			No	e0
BA2903YFV-CE2	ROHM	Comparator	Automotive	Gull Wing	8	LSSOP	Rectangular	Plastic/Epoxy		5 mV	275 nA	Yes	2	BIPOLAR	AEC-Q100	2.5 mA		Tape And Reel	5 V	5 V	Small Outline, Low Profile, Shrink Pitch	SSOP8,.25	Operational Amplifiers	36 V	0.026 in (0.65 mm)	125 °C (257 °F)	250 nA	1.3 µs		-40 °C (-40 °F)	Tin Copper	Dual	R-PDSO-G8		0.049 in (1.25 mm)	0.118 in (3 mm)	No	e2			0.173 in (4.4 mm)
CA3290E	Renesas Electronics	Comparator	Military	Through-Hole	8	DIP	Rectangular	Plastic/Epoxy				No	2			1.4 mA			5 V		In-Line	DIP8,.3	Comparators	36 V	0.1 in (2.54 mm)	125 °C (257 °F)		400 ns	Open-Collector	-55 °C (-67 °F)		Dual	R-PDIP-T8		0.21 in (5.33 mm)	0.3 in (7.62 mm)					0.377 in (9.584 mm)

Comparators

Comparators are electronic circuits that compare two input voltages and output a voltage signal that indicates which of the inputs is larger. A comparator is similar to an operational amplifier (op-amp), but it is designed to operate with a limited range of voltage outputs (typically near the power supply rails) and with very high gain.

A comparator typically has two input terminals, a non-inverting (+) input and an inverting (-) input, and one output. When the voltage at the non-inverting input is greater than the voltage at the inverting input, the output of the comparator switches to its maximum positive voltage. Conversely, when the voltage at the inverting input is greater than the voltage at the non-inverting input, the output of the comparator switches to its maximum negative voltage.

Comparators are often used in applications where a precise measurement or detection of voltage level is required, such as in voltage reference circuits, level detectors, and waveform generators. They can also be used to implement digital logic circuits and are frequently used in A/D converters and motor control circuits.

It is worth noting that a comparator output can switch quickly between its high and low states, so they can be sensitive to noise and require careful circuit design to ensure proper operation. In addition, some comparators may include features such as hysteresis, which can help to reduce noise and ensure stable operation in the presence of small fluctuations in the input signals.