8 Comparators 2,400+

Reset All

Part	Manufacturer	Amplifier Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Total Dose (V)	Package Body Material	Maximum Negative Supply Voltage Limit	Maximum Input Offset Voltage	Maximum Average Bias Current (IIB)	Surface Mount	No. of Functions	Technology	Screening Level	Maximum Supply Current	Nominal Negative Supply Voltage (Vsup)	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Sub-Category	Maximum Supply Voltage Limit	Terminal Pitch	Maximum Operating Temperature	Maximum Bias Current (IIB) @25C	Nominal Response Time	Output Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length
TLV7256IDDURG4	Texas Instruments	Comparator	Industrial	Gull Wing	8	VSSOP	Rectangular		Plastic/Epoxy		9 mV		Yes	2	CMOS		70 μA			1.8 V	1.8/5 V	Small Outline, Very Thin Profile, Shrink Pitch	TSSOP8,.12,20	Comparators	7 V	0.02 in (0.5 mm)	85 °C (185 °F)		30 ns	Push-Pull	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.035 in (0.9 mm)	0.079 in (2 mm)	No	e4	30 s	260 °C (500 °F)	0.091 in (2.3 mm)
TLC372CPS	Texas Instruments	Comparator	Commercial	Gull Wing	8	SOP	Rectangular		Plastic/Epoxy		6.5 mV	600 pA	Yes	2	CMOS		300 μA			5 V		Small Outline		Comparators	18 V	0.05 in (1.27 mm)	70 °C (158 °F)	30 pA	650 ns	Open-Collector	0 °C (32 °F)	Nickel/Palladium/Gold	Dual	R-PDSO-G8	1	0.079 in (2 mm)	0.209 in (5.3 mm)	No	e4		260 °C (500 °F)	0.244 in (6.2 mm)
TLV2393IPWR	Texas Instruments	Comparator	Industrial	Gull Wing	8	TSSOP	Rectangular		Plastic/Epoxy		9 mV	-400 nA	Yes	2	BIPOLAR					3 V	3/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.25	Comparators	7 V	0.026 in (0.65 mm)	105 °C (221 °F)	250 nA	450 ns	Open-Collector	-40 °C (-40 °F)		Dual	R-PDSO-G8		0.047 in (1.2 mm)	0.118 in (3 mm)	No				0.173 in (4.4 mm)
TLV3702QDRQ1	Texas Instruments	Comparator	Automotive	Gull Wing	8	SOP	Rectangular		Plastic/Epoxy		7 mV	2 nA	Yes	2		AEC-Q100	1.6 μA		Tape And Reel	5 V	±1.35/±8/2.7/16 V	Small Outline	SOP8,.25	Comparators	17 V	0.05 in (1.27 mm)	125 °C (257 °F)	100 pA	240 µs	Push-Pull	-40 °C (-40 °F)	Nickel/Palladium/Gold	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4		260 °C (500 °F)	0.193 in (4.9 mm)
5962-00-117-4379	Texas Instruments	Comparator	Military	Wire	8		Round		Metal						BIPOLAR							Cylindrical	CAN8,.2	Comparators			125 °C (257 °F)				-55 °C (-67 °F)		Bottom	O-MBCY-W8				No
TLV3491AMDREP	Texas Instruments	Comparator	Military	Gull Wing	8	SOP	Rectangular		Plastic/Epoxy		25 mV	1.6 nA	Yes	1	CMOS		2.1 μA			5 V	2/5 V	Small Outline	SOP8,.25	Comparators	5.5 V	0.05 in (1.27 mm)	125 °C (257 °F)	50 pA	1.2 µs	Push-Pull	-55 °C (-67 °F)		Dual	R-PDSO-G8		0.069 in (1.75 mm)	0.154 in (3.9 mm)	No				0.193 in (4.9 mm)
TL311AP	Texas Instruments	Comparator	Commercial	Through-Hole	8	DIP	Rectangular		Plastic/Epoxy		10 mV		No					-15 V		15 V	±15 V	In-Line	DIP8,.3	Comparators		0.1 in (2.54 mm)	70 °C (158 °F)	250 pA	165 ns		0 °C (32 °F)		Dual	R-PDIP-T8				No
TL111JG	Texas Instruments	Comparator	Military	Through-Hole	8	DIP	Rectangular		Ceramic		3 mV		No					-15 V		15 V	±15 V	In-Line	DIP8,.3	Comparators		0.1 in (2.54 mm)	125 °C (257 °F)	250 pA	165 ns		-55 °C (-67 °F)		Dual	R-XDIP-T8				No
TLV7022DSGR	Texas Instruments	Comparator	Automotive	No Lead	8	HVSON	Square		Plastic/Epoxy		8 mV	2 pA	Yes	2			18 μA		Tape And Reel	5 V		Small Outline, Heat Sink/Slug, Very Thin Profile	SOLCC8,.08,20	Comparators	7 V	0.02 in (0.5 mm)	125 °C (257 °F)	2 pA	260 ns	Open-Drain	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	S-PDSO-N8	1	0.031 in (0.8 mm)	0.079 in (2 mm)		e4	30 s	260 °C (500 °F)	0.079 in (2 mm)
TL714CP	Texas Instruments	Comparator	Commercial	Through-Hole	8	DIP	Rectangular		Plastic/Epoxy		10 mV	600 uA	No	1	BIPOLAR		12 mA		Tube	5 V	5 V	In-Line	DIP8,.3	Comparators	7 V	0.1 in (2.54 mm)	70 °C (158 °F)	600 uA	6 ns	Push-Pull	0 °C (32 °F)	Nickel Palladium Gold	Dual	R-PDIP-T8	1	0.2 in (5.08 mm)	0.3 in (7.62 mm)	No	e4			0.386 in (9.81 mm)
TLV7256IDCTR	Texas Instruments	Comparator	Industrial	Gull Wing	8	LSSOP	Rectangular		Plastic/Epoxy		9 mV		Yes	2	CMOS					1.8 V		Small Outline, Low Profile, Shrink Pitch		Comparators	7 V	0.026 in (0.65 mm)	85 °C (185 °F)		30 ns	Push-Pull	-40 °C (-40 °F)		Dual	R-PDSO-G8		0.051 in (1.3 mm)	0.11 in (2.8 mm)	No				0.116 in (2.95 mm)
5962-9555101QPA	Texas Instruments	Comparator	Military	Through-Hole	8	DIP	Rectangular		Ceramic, Glass-Sealed		5 mV	30 nA	No	2	CMOS	MIL-PRF-38535 Class Q	40 μA		Tube	5 V	4/16 V	In-Line	DIP8,.3	Comparators	18 V	0.1 in (2.54 mm)	125 °C (257 °F)	30 pA	2.5 µs	Open-Collector, Open-Drain	-55 °C (-67 °F)	Tin Lead	Dual	R-GDIP-T8		0.2 in (5.08 mm)	0.3 in (7.62 mm)	Yes	e0			0.377 in (9.58 mm)
TL3116CPW	Texas Instruments	Comparator	Commercial	Gull Wing	8	TSSOP	Rectangular		Plastic/Epoxy	-7 V	3 mV	1.2 uA	Yes	1	BIPOLAR		14.7 mA	-5 V	Tube	5 V	5/±5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.25	Comparators	7 V	0.026 in (0.65 mm)	70 °C (158 °F)	1.1 uA	9.9 ns		0 °C (32 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.047 in (1.2 mm)	0.118 in (3 mm)	No	e4	30 s	260 °C (500 °F)	0.173 in (4.4 mm)
LM211H	Texas Instruments	Comparator	Other	Wire	8		Round		Metal		3 mV			1	BIPOLAR		6 mA	-15 V		15 V	±15 V	Cylindrical	CAN8,.2	Comparators			85 °C (185 °F)	100 nA	200 ns		-25 °C (-13 °F)		Bottom	O-MBCY-W8				No
TLV2393ID-00	Texas Instruments	Comparator	Industrial	Gull Wing	8	SOP	Rectangular		Plastic/Epoxy		9 mV	-400 nA	Yes	2	BIPOLAR					3 V		Small Outline			7 V	0.05 in (1.27 mm)	105 °C (221 °F)		450 ns	Open-Collector	-40 °C (-40 °F)		Dual	R-PDSO-G8		0.069 in (1.75 mm)	0.154 in (3.9 mm)	No				0.193 in (4.9 mm)
5962-9153202QPA	Texas Instruments	Comparator	Military	Through-Hole	8	DIP	Rectangular		Ceramic, Glass-Sealed		10 mV	30 nA	No	2	CMOS	MIL-PRF-38535 Class Q	40 μA		Tube	5 V	3 V	In-Line	DIP8,.3	Comparators	18 V	0.1 in (2.54 mm)	125 °C (257 °F)	30 pA	2.7 µs	Push-Pull	-55 °C (-67 °F)	Tin/Lead	Dual	R-GDIP-T8		0.2 in (5.08 mm)	0.3 in (7.62 mm)	Yes	e0			0.377 in (9.58 mm)
TLC3702IJG	Texas Instruments	Comparator	Industrial	Through-Hole	8	DIP	Rectangular		Ceramic, Glass-Sealed		7 mV		No	2	CMOS		65 μA			5 V	5 V	In-Line	DIP8,.3	Comparators	18 V	0.1 in (2.54 mm)	85 °C (185 °F)	2 nA	1.1 µs	Totem Pole	-40 °C (-40 °F)		Dual	R-GDIP-T8		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No				0.378 in (9.6 mm)
SN72306L	Texas Instruments	Comparator	Commercial	Wire	8		Round		Metal					1	BIPOLAR						12,-3/-12 V	Cylindrical	CAN8,.2	Comparators			70 °C (158 °F)				0 °C (32 °F)		Bottom	O-MBCY-W8				No
TL810MJG	Texas Instruments	Comparator	Military	Through-Hole	8	DIP	Rectangular		Ceramic				No		BIPOLAR							In-Line	DIP8,.3	Comparators		0.1 in (2.54 mm)	125 °C (257 °F)				-55 °C (-67 °F)		Dual	R-XDIP-T8				No
TL393Y	Texas Instruments	Comparator	Industrial	No Lead	8	DIE	Rectangular				5 mV	-250 nA	Yes	2	BIPOLAR		1 mA			5 V		Uncased Chip			7 V		105 °C (221 °F)		650 ns	Open-Collector	-40 °C (-40 °F)		Upper	R-XUUC-N8				No
TLC3702MDRG4	Texas Instruments	Comparator	Military	Gull Wing	8	SOP	Rectangular		Plastic/Epoxy		10 mV	30 nA	Yes	2	CMOS		40 μA		Tape And Reel	5 V	5 V	Small Outline	SOP8,.25	Comparators	18 V	0.05 in (1.27 mm)	125 °C (257 °F)	30 pA	2.7 µs	Push-Pull	-55 °C (-67 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4	30 s	260 °C (500 °F)	0.193 in (4.9 mm)
5962-9554901NXX	Texas Instruments	Comparator	Military	Gull Wing	8	SOP	Rectangular		Plastic/Epoxy	-18 V	10 mV	20 nA	Yes	2	CMOS	MIL-PRF-38535 Class N	400 μA			5 V		Small Outline		Comparators	18 V	0.05 in (1.27 mm)	125 °C (257 °F)				-55 °C (-67 °F)	Palladium	Dual	R-PDSO-G8		0.069 in (1.75 mm)	0.154 in (3.9 mm)	Yes	e4			0.193 in (4.9 mm)
TLC393CPWG4	Texas Instruments	Comparator	Commercial	Gull Wing	8	TSSOP	Rectangular		Plastic/Epoxy		6.5 mV	600 pA	Yes	2	CMOS		50 μA			5 V	5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.25	Comparators	18 V	0.026 in (0.65 mm)	70 °C (158 °F)		2.5 µs	Open-Drain	0 °C (32 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.047 in (1.2 mm)	0.118 in (3 mm)	No	e4	30 s	260 °C (500 °F)	0.173 in (4.4 mm)
TL510CJG	Texas Instruments	Comparator	Commercial	Through-Hole	8	DIP	Rectangular		Ceramic				No		BIPOLAR							In-Line	DIP8,.3	Comparators		0.1 in (2.54 mm)	70 °C (158 °F)				0 °C (32 °F)		Dual	R-XDIP-T8				No
5962R9452603V9A	Texas Instruments	Comparator	Military	No Lead	8	DIE	Rectangular	100k Rad(Si)		0 V	4 mV	-300 nA	Yes	2	BIPOLAR	MIL-PRF-38535 Class V	1 mA			5 V		Uncased Chip		Comparators	36 V		125 °C (257 °F)	100 nA	800 ns	Open-Collector, Open-Drain	-55 °C (-67 °F)		Upper	R-XUUC-N8	1		0.033 in (0.8382 mm)	Yes				0.034 in (0.8636 mm)
TL712CPW	Texas Instruments	Comparator	Commercial	Gull Wing	8	TSSOP	Rectangular		Plastic/Epoxy		1 mV		Yes	1	BIPOLAR		20 mA			5 V	5 V	Small Outline, Thin Profile, Shrink Pitch	SSOP8,.3	Comparators	7 V	0.026 in (0.65 mm)	70 °C (158 °F)		25 ns	3-State	0 °C (32 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.047 in (1.2 mm)	0.118 in (3 mm)	No	e4	30 s	260 °C (500 °F)	0.173 in (4.4 mm)
LM2903JG	Texas Instruments	Comparator	Automotive	Through-Hole	8	DIP	Rectangular		Ceramic, Glass-Sealed		15 mV	500 nA	No	2	BIPOLAR		2.5 mA			5 V	5 V	In-Line	DIP8,.3	Comparators		0.1 in (2.54 mm)	125 °C (257 °F)	250 nA	1.3 µs	Open-Collector	-40 °C (-40 °F)		Dual	R-GDIP-T8		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No				0.378 in (9.6 mm)
TLV2393IDR	Texas Instruments	Comparator	Industrial	Gull Wing	8	SOP	Rectangular		Plastic/Epoxy		9 mV	-400 nA	Yes	2	BIPOLAR		1.6 mA			3 V	3/5 V	Small Outline	SOP8,.25	Comparators	7 V	0.05 in (1.27 mm)	105 °C (221 °F)	250 nA	450 ns	Open-Collector	-40 °C (-40 °F)		Dual	R-PDSO-G8		0.069 in (1.75 mm)	0.154 in (3.9 mm)	No				0.193 in (4.9 mm)
TL714CDRE4	Texas Instruments	Comparator	Commercial	Gull Wing	8	SOP	Rectangular		Plastic/Epoxy				Yes	1	BIPOLAR		12 mA			5 V	5 V	Small Outline	SOP8,.25	Comparators	7 V	0.05 in (1.27 mm)	70 °C (158 °F)		6 ns	Totem Pole	0 °C (32 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4	30 s	260 °C (500 °F)	0.193 in (4.9 mm)
V62/06675-01XE	Texas Instruments	Comparator	Military	Gull Wing	8	SOP	Rectangular		Plastic/Epoxy	0 V	5 mV	20 nA	Yes	2	CMOS	MIL-STD-883	300 μA	0 V	Tape And Reel	5 V	5 V	Small Outline	SOP8,.25	Comparators	18 V	0.05 in (1.27 mm)	125 °C (257 °F)	30 pA	650 ns	Open-Collector, Open-Drain	-55 °C (-67 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4	30 s	260 °C (500 °F)	0.193 in (4.9 mm)
TLV9022PWR	Texas Instruments	Comparator		Gull Wing	8	TSSOP	Rectangular		Plastic/Epoxy		2 mV		Yes	2			70 μA			5 V		Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.25		6 V	0.026 in (0.65 mm)	125 °C (257 °F)		150 ns	Open-Drain	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.047 in (1.2 mm)	0.118 in (3 mm)		e4		260 °C (500 °F)	0.173 in (4.4 mm)
TL3116IPWG4	Texas Instruments	Comparator	Industrial	Gull Wing	8	TSSOP	Rectangular		Plastic/Epoxy	-7 V	3.5 mV	1.5 uA	Yes	1	BIPOLAR		15 mA	-5 V		5 V	5/±5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.25	Comparators	7 V	0.026 in (0.65 mm)	85 °C (185 °F)	1.1 uA	9.9 ns		-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.047 in (1.2 mm)	0.118 in (3 mm)	No	e4	30 s	260 °C (500 °F)	0.173 in (4.4 mm)
LMP7300MAX	Texas Instruments	Comparator	Automotive	Gull Wing	8	SOP	Rectangular		Plastic/Epoxy		2 mV	4 nA	Yes	1						5 V		Small Outline		Comparators	13.6 V	0.05 in (1.27 mm)	125 °C (257 °F)		12 µs	Open-Collector	-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G8	1	0.069 in (1.753 mm)	0.154 in (3.9 mm)	No	e0	30 s	235 °C (455 °F)	0.193 in (4.9 mm)
LM393H	Texas Instruments	Comparator	Commercial	Wire	8		Round		Metal	0 V	9 mV	400 nA	No	2	BIPOLAR			0 V		5 V		Cylindrical		Comparators	36 V		70 °C (158 °F)		1.3 µs	Open-Collector	0 °C (32 °F)		Bottom	O-MBCY-W8
TLV3402CDGK	Texas Instruments	Comparator	Commercial	Gull Wing	8	TSSOP	Square		Plastic/Epoxy	0 V	4.4 mV	1.5 nA	Yes	2			1.28 μA	0 V	Tube	2.7 V	±1.25/±8/2.5/16 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.19	Comparators	17 V	0.026 in (0.65 mm)	70 °C (158 °F)	100 pA	175 µs	Open-Drain	0 °C (32 °F)	Nickel/Palladium/Gold/Silver	Dual	S-PDSO-G8	1	0.043 in (1.1 mm)	0.118 in (3 mm)	No	e4		260 °C (500 °F)	0.118 in (3 mm)
TL721CJG4	Texas Instruments	Comparator	Commercial	Through-Hole	8	DIP	Rectangular		Ceramic				No		BIPOLAR							In-Line	DIP8,.3	Comparators		0.1 in (2.54 mm)	70 °C (158 °F)				0 °C (32 °F)		Dual	R-XDIP-T8
5962L0052401VGX	Texas Instruments	Comparator	Military	Wire	8		Round		Metal	-18 V	4 mV	100 pA	No	1	BIPOLAR	MIL-PRF-38535 Class V		-15 V		15 V		Cylindrical		Comparators	18 V		125 °C (257 °F)		200 ns	Open-Collector	-55 °C (-67 °F)		Bottom	O-MBCY-W8				Yes
LM306DP3	Texas Instruments	Comparator	Commercial	Gull Wing	8	SOP	Rectangular		Plastic/Epoxy				Yes	1	BIPOLAR						12,-3/-12 V	Small Outline	SOP8,.25	Comparators		0.05 in (1.27 mm)	70 °C (158 °F)				0 °C (32 °F)		Dual	R-PDSO-G8
LM193H/883	Texas Instruments	Comparator	Military	Wire	8	TO-99	Round		Metal	0 V	9 mV	300 nA	No	2	BIPOLAR	MIL-STD-883	1 mA	0 V		5 V	5 V	Cylindrical	CAN8,.2	Comparators	36 V	0.1 in (2.54 mm)	125 °C (257 °F)	100 nA	1.3 µs	Open-Collector, Open-Drain	-55 °C (-67 °F)		Bottom	O-MBCY-W8	1	0.225 in (5.72 mm)	0.357 in (9.08 mm)	No				0.357 in (9.08 mm)
LM393ADP3	Texas Instruments	Comparator	Commercial	Gull Wing	8	SOP	Rectangular		Plastic/Epoxy		4 mV		Yes	2	BIPOLAR					5 V	5 V	Small Outline	SOP8,.25	Comparators		0.05 in (1.27 mm)	70 °C (158 °F)				0 °C (32 °F)		Dual	R-PDSO-G8
TLC372CPE4	Texas Instruments	Comparator	Commercial	Through-Hole	8	DIP	Rectangular		Plastic/Epoxy		6.5 mV	600 pA	No	2	CMOS		400 μA			5 V	5 V	In-Line	DIP8,.3	Comparators	18 V	0.1 in (2.54 mm)	70 °C (158 °F)	600 pA	650 ns	Open-Drain	0 °C (32 °F)	Nickel Palladium Gold	Dual	R-PDIP-T8		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No	e4			0.386 in (9.81 mm)
LM393APS	Texas Instruments	Comparator	Commercial	Gull Wing	8	SOP	Rectangular		Plastic/Epoxy	0 V	4 mV	-400 nA	Yes	2	BIPOLAR		2.5 mA	0 V		5 V	5 V	Small Outline	SOP8,.3	Comparators	36 V	0.05 in (1.27 mm)	70 °C (158 °F)	250 nA	1.3 µs	Open-Collector	0 °C (32 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.079 in (2 mm)	0.209 in (5.3 mm)	No	e4	30 s	260 °C (500 °F)	0.244 in (6.2 mm)
LMC7211AIM	Texas Instruments	Comparator	Industrial	Gull Wing	8	SOP	Rectangular		Plastic/Epoxy	0 V	8 mV	0.4 pA	Yes	1	CMOS		12 μA	0 V	Tube	5 V	2.7/15 V	Small Outline	SOP8,.25	Comparators	16 V	0.05 in (1.27 mm)	85 °C (185 °F)	0.4 pA	4 µs	Push-Pull	-40 °C (-40 °F)	Tin/Lead	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e0		235 °C (455 °F)	0.193 in (4.9 mm)
TLC372CPSR	Texas Instruments	Comparator	Commercial	Gull Wing	8	SOP	Rectangular		Plastic/Epoxy		6.5 mV	600 pA	Yes	2	CMOS		300 μA		Tape And Reel	5 V	5 V	Small Outline	SOP8,.3	Comparators	18 V	0.05 in (1.27 mm)	70 °C (158 °F)	30 pA	650 ns	Open-Collector	0 °C (32 °F)	Nickel/Palladium/Gold	Dual	R-PDSO-G8	1	0.079 in (2 mm)	0.209 in (5.3 mm)	No	e4		260 °C (500 °F)	0.244 in (6.2 mm)
5962-00-866-0785	Texas Instruments	Comparator	Military	Wire	8		Round		Metal						BIPOLAR							Cylindrical	CAN8,.2	Comparators			125 °C (257 °F)				-55 °C (-67 °F)		Bottom	O-MBCY-W8				No
5962-9452601QPA	Texas Instruments	Comparator	Military	Through-Hole	8	DIP	Rectangular		Ceramic, Glass-Sealed		9 mV	-300 nA	No	2	BIPOLAR	MIL-PRF-38535 Class Q	2.5 mA		Tube	5 V	5 V	In-Line	DIP8,.3	Comparators	36 V	0.1 in (2.54 mm)	125 °C (257 °F)	100 nA	1.3 µs	Open-Collector, Open-Drain	-55 °C (-67 °F)	Tin/Lead	Dual	R-GDIP-T8		0.2 in (5.08 mm)	0.3 in (7.62 mm)	Yes	e0			0.377 in (9.58 mm)
SN72810P	Texas Instruments	Comparator	Commercial	Through-Hole	8	DIP	Rectangular		Plastic/Epoxy				No		BIPOLAR							In-Line	DIP8,.3	Comparators		0.1 in (2.54 mm)	70 °C (158 °F)				0 °C (32 °F)		Dual	R-PDIP-T8				No
LM2903DWLE	Texas Instruments	Comparator	Automotive	Gull Wing	8	SSOP	Rectangular		Plastic/Epoxy		15 mV		Yes		BIPOLAR		2.5 mA			5 V	5 V	Small Outline, Shrink Pitch	SSOP8,.3	Comparators		0.025 in (0.635 mm)	125 °C (257 °F)	25 nA	1.3 µs		-40 °C (-40 °F)		Dual	R-PDSO-G8				No

Comparators

Comparators are electronic circuits that compare two input voltages and output a voltage signal that indicates which of the inputs is larger. A comparator is similar to an operational amplifier (op-amp), but it is designed to operate with a limited range of voltage outputs (typically near the power supply rails) and with very high gain.

A comparator typically has two input terminals, a non-inverting (+) input and an inverting (-) input, and one output. When the voltage at the non-inverting input is greater than the voltage at the inverting input, the output of the comparator switches to its maximum positive voltage. Conversely, when the voltage at the inverting input is greater than the voltage at the non-inverting input, the output of the comparator switches to its maximum negative voltage.

Comparators are often used in applications where a precise measurement or detection of voltage level is required, such as in voltage reference circuits, level detectors, and waveform generators. They can also be used to implement digital logic circuits and are frequently used in A/D converters and motor control circuits.

It is worth noting that a comparator output can switch quickly between its high and low states, so they can be sensitive to noise and require careful circuit design to ensure proper operation. In addition, some comparators may include features such as hysteresis, which can help to reduce noise and ensure stable operation in the presence of small fluctuations in the input signals.