8 Comparators 2,400+

Reset All

Part	Manufacturer	Amplifier Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Total Dose (V)	Package Body Material	Maximum Negative Supply Voltage Limit	Maximum Input Offset Voltage	Maximum Average Bias Current (IIB)	Surface Mount	No. of Functions	Technology	Screening Level	Maximum Supply Current	Nominal Negative Supply Voltage (Vsup)	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Sub-Category	Maximum Supply Voltage Limit	Terminal Pitch	Maximum Operating Temperature	Maximum Bias Current (IIB) @25C	Nominal Response Time	Output Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length
BA10393	ROHM	Comparator	Industrial	Through-Hole	8	DIP	Rectangular		Plastic/Epoxy	0 V	5 mV	250 nA	No	2	BIPOLAR		1 mA	0 V		5 V	±1/±18/2/36 V	In-Line	DIP8,.3	Comparators	36 V	0.1 in (2.54 mm)	85 °C (185 °F)	250 nA	1.3 µs	Open-Collector	-40 °C (-40 °F)	Tin/Copper	Dual	R-PDIP-T8		0.146 in (3.7 mm)	0.3 in (7.62 mm)	No	e2	10 s	260 °C (500 °F)	0.366 in (9.3 mm)
BA10393F-E2	ROHM	Comparator	Industrial	Gull Wing	8	SOP	Rectangular		Plastic/Epoxy		5 mV	250 nA	Yes	2	BIPOLAR					5 V		Small Outline		Comparators	36 V	0.05 in (1.27 mm)	85 °C (185 °F)		1.3 µs	Open-Collector	-40 °C (-40 °F)	Tin Copper	Dual	R-PDSO-G8		0.063 in (1.6 mm)	0.173 in (4.4 mm)	No	e2			0.197 in (5 mm)
BA2903YFV-MGE2	ROHM	Comparator	Automotive	Gull Wing	8	LSSOP	Rectangular		Plastic/Epoxy		15 mV	500 nA	Yes	2	BIPOLAR					5 V		Small Outline, Low Profile, Shrink Pitch		Comparators	36 V	0.026 in (0.65 mm)	125 °C (257 °F)		1.3 µs	Open-Collector	-40 °C (-40 °F)		Dual	R-PDSO-G8		0.053 in (1.35 mm)	0.118 in (3 mm)					0.173 in (4.4 mm)
BU7232YFVM-CTR	ROHM	Comparator	Automotive	Gull Wing	8	VSSOP	Rectangular		Plastic/Epoxy		15 mV	300 pA	Yes	2	CMOS	AEC-Q100			Tape And Reel	3 V		Small Outline, Very Thin Profile, Shrink Pitch		Comparators	7 V	0.026 in (0.65 mm)	125 °C (257 °F)		1.7 µs	Push-Pull	-40 °C (-40 °F)		Dual	R-PDSO-G8		0.035 in (0.9 mm)	0.11 in (2.8 mm)					0.114 in (2.9 mm)
LM211J-8	National Semiconductor	Comparator	Other	Through-Hole	8	DIP	Rectangular		Ceramic, Glass-Sealed	-18 V	4 mV	150 nA	No	1	BIPOLAR			-15 V		15 V	±15 V	In-Line	DIP8,.3	Comparators	18 V	0.1 in (2.54 mm)	85 °C (185 °F)	100 nA	200 ns	Open-Collector	-25 °C (-13 °F)	Tin Lead	Dual	R-GDIP-T8	1	0.2 in (5.08 mm)	0.3 in (7.62 mm)	No	e0	40	260 °C (500 °F)	0.38 in (9.652 mm)
LM211J8	Motorola	Comparator	Other	Through-Hole	8	DIP	Rectangular		Ceramic		4 mV		No	1	BIPOLAR			-15 V		15 V	±15 V	In-Line	DIP8,.3	Comparators		0.1 in (2.54 mm)	85 °C (185 °F)				-25 °C (-13 °F)	Tin/Lead	Dual	R-XDIP-T8				No	e0
LM2903FVT-E2	ROHM	Comparator		Gull Wing	8	TSSOP	Rectangular		Plastic/Epoxy		5 mV	500 nA	Yes	2			1.5 mA		Tape And Reel	5 V		Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.25	Comparators	36 V	0.026 in (0.65 mm)	125 °C (257 °F)	250 nA	1 µs	Open-Collector	-40 °C (-40 °F)		Dual	R-PDSO-G8		0.047 in (1.2 mm)	0.118 in (3 mm)					0.173 in (4.4 mm)
LM393FV-E2	ROHM	Comparator		Gull Wing	8	LSSOP	Rectangular		Plastic/Epoxy		5 mV	500 nA	Yes	2			1.5 mA		Tape And Reel	5 V		Small Outline, Low Profile, Shrink Pitch	SSOP8,.25	Comparators	36 V	0.026 in (0.65 mm)	85 °C (185 °F)	250 nA	1 µs	Open-Collector	-40 °C (-40 °F)		Dual	R-PDSO-G8		0.053 in (1.35 mm)	0.118 in (3 mm)					0.173 in (4.4 mm)
LM393FVJ-E2	ROHM	Comparator		Gull Wing	8	TSSOP	Square		Plastic/Epoxy		5 mV	500 nA	Yes	2			1.5 mA		Tape And Reel	5 V		Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.19	Comparators	36 V	0.026 in (0.65 mm)	85 °C (185 °F)	250 nA	1 µs	Open-Collector	-40 °C (-40 °F)		Dual	S-PDSO-G8		0.043 in (1.1 mm)	0.118 in (3 mm)					0.118 in (3 mm)
LM393N-A	Philips Semiconductors	Comparator	Commercial	Through-Hole	8	DIP	Rectangular		Plastic/Epoxy		9 mV		No	2	BIPOLAR					5 V	5 V	In-Line	DIP8,.3	Comparators		0.1 in (2.54 mm)	70 °C (158 °F)				0 °C (32 °F)	Tin/Lead	Dual	R-PDIP-T8				No	e0
LM393N/A+	National Semiconductor	Comparator	Commercial	Through-Hole	8	DIP	Rectangular		Plastic/Epoxy		9 mV		No	2	BIPOLAR					5 V	5 V	In-Line	DIP8,.3	Comparators		0.1 in (2.54 mm)	70 °C (158 °F)				0 °C (32 °F)	Tin/Lead	Dual	R-PDIP-T8					e0
TA75393F	Toshiba	Comparator	Industrial	Gull Wing	8	SOP	Rectangular		Plastic/Epoxy	0 V	5 mV	250 nA	Yes	2	BIPOLAR		2 mA	0 V		5 V	5 V	Small Outline	SOP8,.25	Comparators	36 V	0.05 in (1.27 mm)	85 °C (185 °F)	250 nA	1.3 µs	Open-Collector	-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G8		0.075 in (1.9 mm)	0.173 in (4.4 mm)	No	e0			0.197 in (5 mm)
TC75W59FK(TE85L,F)	Toshiba	Comparator	Industrial	Gull Wing	8	TSSOP	Rectangular		Plastic/Epoxy		7 mV		Yes	2	CMOS		440 μA				3/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.12,20	Comparators		0.02 in (0.5 mm)	85 °C (185 °F)		170 ns		-40 °C (-40 °F)		Dual	R-PDSO-G8				No
UA710HC	National Semiconductor	Comparator	Commercial	Wire	8		Round		Metal						BIPOLAR						12,-6 V	Cylindrical	CAN8,.2	Comparators			70 °C (158 °F)				0 °C (32 °F)	Tin/Lead	Bottom	O-MBCY-W8				No	e0
CMP01CP	Analog Devices	Comparator	Commercial	Through-Hole	8	DIP	Rectangular		Plastic/Epoxy	-18 V	3.5 mV	900 nA	No	1	BIPOLAR		8.5 mA	-15 V		15 V	5/±15 V	In-Line	DIP8,.3	Comparators	18 V	0.1 in (2.54 mm)	70 °C (158 °F)	900 nA	110 ns	Totem Pole	0 °C (32 °F)	Tin Lead	Dual	R-PDIP-T8		0.21 in (5.33 mm)	0.3 in (7.62 mm)	No	e0			0.389 in (9.88 mm)
LT1671CMS8#PBF	Analog Devices	Comparator	Commercial	Gull Wing	8	TSSOP	Square		Plastic/Epoxy	-7 V	4 mV	350 nA	Yes	1				-5 V		5 V		Small Outline, Thin Profile, Shrink Pitch		Comparators	7 V	0.026 in (0.65 mm)	70 °C (158 °F)		85 ns		0 °C (32 °F)	Matte Tin	Dual	S-PDSO-G8	1	0.043 in (1.1 mm)	0.118 in (3 mm)	No	e3	30 s	260 °C (500 °F)	0.118 in (3 mm)
LT1713CMS8#PBF	Analog Devices	Comparator	Commercial	Gull Wing	8	TSSOP	Square		Plastic/Epoxy	-6.3 V	4 mV	5 uA	Yes	1				-5 V		5 V		Small Outline, Thin Profile, Shrink Pitch		Comparators	6.3 V	0.026 in (0.65 mm)	70 °C (158 °F)		8.5 ns		0 °C (32 °F)	Matte Tin	Dual	S-PDSO-G8	1	0.043 in (1.1 mm)	0.118 in (3 mm)	No	e3	30 s	260 °C (500 °F)	0.118 in (3 mm)
LTC1440IS8#TRPBF	Analog Devices	Comparator	Industrial	Gull Wing	8	SOP	Rectangular		Plastic/Epoxy	-0.3 V	10 mV		Yes	1	CMOS			0 V	Tape And Reel	3 V		Small Outline		Comparators	12 V	0.05 in (1.27 mm)	85 °C (185 °F)		14 µs		-40 °C (-40 °F)	Matte Tin	Dual	R-PDSO-G8	1	0.069 in (1.752 mm)	0.154 in (3.899 mm)	No	e3	30 s	260 °C (500 °F)	0.193 in (4.9025 mm)
LTC1843IS8#PBF	Analog Devices	Comparator	Industrial	Gull Wing	8	SOP	Rectangular		Plastic/Epoxy		10 mV		Yes	2	CMOS					3 V		Small Outline		Comparators		0.05 in (1.27 mm)	85 °C (185 °F)		5 µs	Open-Drain	-40 °C (-40 °F)	Matte Tin	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e3	30 s	260 °C (500 °F)	0.193 in (4.9 mm)
TLC3702MD	Texas Instruments	Comparator	Military	Gull Wing	8	SOP	Rectangular		Plastic/Epoxy		10 mV	30 nA	Yes	2	CMOS		40 μA		Tube	5 V	5 V	Small Outline	SOP8,.25	Comparators	18 V	0.05 in (1.27 mm)	125 °C (257 °F)	30 pA	2.7 µs	Push-Pull	-55 °C (-67 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4	30 s	260 °C (500 °F)	0.193 in (4.9 mm)
TLC3702MDG4	Texas Instruments	Comparator	Military	Gull Wing	8	SOP	Rectangular		Plastic/Epoxy		10 mV	30 nA	Yes	2	CMOS		40 μA		Tube	5 V	5 V	Small Outline	SOP8,.25	Comparators	18 V	0.05 in (1.27 mm)	125 °C (257 °F)	30 pA	2.7 µs	Push-Pull	-55 °C (-67 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4	30 s	260 °C (500 °F)	0.193 in (4.9 mm)
TLC3702MDR	Texas Instruments	Comparator	Military	Gull Wing	8	SOP	Rectangular		Plastic/Epoxy		10 mV	30 nA	Yes	2	CMOS		40 μA		Tape And Reel	5 V	5 V	Small Outline	SOP8,.25	Comparators	18 V	0.05 in (1.27 mm)	125 °C (257 °F)	30 pA	2.7 µs	Push-Pull	-55 °C (-67 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4	30 s	260 °C (500 °F)	0.193 in (4.9 mm)
UPC277G2-E1-A	Renesas Electronics	Comparator		Gull Wing	8	SOP	Rectangular		Plastic/Epoxy		5 mV	250 nA	Yes	1	BIPOLAR		1 mA			5 V		Small Outline	SOP8,.25	Comparators	36 V	0.05 in (1.27 mm)	85 °C (185 °F)	250 nA	1.3 µs	Open-Collector	-40 °C (-40 °F)	Tin Bismuth	Dual	R-PDSO-G8		0.071 in (1.8 mm)	0.173 in (4.4 mm)		e6			0.205 in (5.2 mm)
TLC393QDR	Texas Instruments	Comparator	Automotive	Gull Wing	8	SOP	Rectangular		Plastic/Epoxy		5 mV	30 nA	Yes	2	CMOS		40 μA		Tape And Reel	5 V	5 V	Small Outline	SOP8,.25	Comparators	18 V	0.05 in (1.27 mm)	125 °C (257 °F)	2 pA	2.5 µs	Open-Collector	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4	30 s	260 °C (500 °F)	0.193 in (4.9 mm)
LMV761MAX	Texas Instruments	Comparator	Automotive	Gull Wing	8	SOP	Rectangular		Plastic/Epoxy		1 mV	50 pA	Yes	1			700 μA			5 V	2.7/5 V	Small Outline	SOP8,.25	Comparators	5.5 V	0.05 in (1.27 mm)	125 °C (257 °F)	50 pA	225 ns	Push-Pull	-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e0	20 s	235 °C (455 °F)	0.193 in (4.9 mm)
TLC393CPS	Texas Instruments	Comparator	Commercial	Gull Wing	8	SOP	Rectangular		Plastic/Epoxy		5 mV	600 pA	Yes	2	CMOS		40 μA			5 V		Small Outline		Comparators	18 V	0.05 in (1.27 mm)	70 °C (158 °F)	2 pA	2.5 µs	Open-Collector	0 °C (32 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.079 in (2 mm)	0.209 in (5.3 mm)	No	e4	30 s	260 °C (500 °F)	0.244 in (6.2 mm)
LMV393DR	Texas Instruments	Comparator	Industrial	Gull Wing	8	SOP	Rectangular		Plastic/Epoxy		7 mV	400 nA	Yes	2			250 μA			2.7 V	2.7/5 V	Small Outline	SOP8,.25	Comparators	5.5 V	0.05 in (1.27 mm)	85 °C (185 °F)	250 nA	400 ns		-40 °C (-40 °F)		Dual	R-PDSO-G8		0.069 in (1.75 mm)	0.154 in (3.9 mm)	No				0.193 in (4.9 mm)
TLV3402QDR	Texas Instruments	Comparator	Automotive	Gull Wing	8	SOP	Rectangular		Plastic/Epoxy	0 V	4.4 mV	1.5 nA	Yes	1				0 V		2.7 V		Small Outline		Comparators	17 V	0.05 in (1.27 mm)	125 °C (257 °F)			Open-Drain	-40 °C (-40 °F)		Dual	R-PDSO-G8		0.069 in (1.75 mm)	0.154 in (3.9 mm)	No				0.193 in (4.9 mm)
LMP7300MME/NOPB	Texas Instruments	Comparator	Automotive	Gull Wing	8	TSSOP	Rectangular		Plastic/Epoxy		750 uV	3 nA	Yes	1			16 μA		Tape And Reel		2.7/12 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.19	Comparators		0.026 in (0.65 mm)	125 °C (257 °F)	3 nA	7.7 µs	Open-Collector	-40 °C (-40 °F)	Matte Tin	Dual	R-PDSO-G8	1	0.042 in (1.07 mm)	0.118 in (3 mm)	No	e3	30 s	260 °C (500 °F)	0.118 in (3 mm)
TL331CP	Texas Instruments	Comparator	Commercial	Through-Hole	8	DIP	Rectangular		Plastic/Epoxy		9 mV	-400 nA	No	1	BIPOLAR		800 μA			5 V	5/30 V	In-Line	DIP8,.3	Comparators		0.1 in (2.54 mm)	70 °C (158 °F)		1.3 µs	Open-Collector	0 °C (32 °F)		Dual	R-PDIP-T8		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No				0.386 in (9.81 mm)
PM2903BQDGKRQ1	Texas Instruments	Comparator	Automotive	Gull Wing	8	TSSOP	Square		Plastic/Epoxy		2 mV	25 nA	Yes	2	BIPOLAR	AEC-Q100	800 μA			5 V		Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.19		36 V	0.026 in (0.65 mm)	125 °C (257 °F)	-250 nA	1 µs	Open-Collector	-40 °C (-40 °F)		Dual	S-PDSO-G8		0.043 in (1.1 mm)	0.118 in (3 mm)					0.118 in (3 mm)
TLV3702IP	Texas Instruments	Comparator	Automotive	Through-Hole	8	DIP	Rectangular		Plastic/Epoxy	0 V	7 mV	1.5 nA	No	2	CMOS		1.6 μA	0 V	Tube	5 V	±1.35/±8/2.7/16 V	In-Line	DIP8,.3	Comparators	17 V	0.1 in (2.54 mm)	125 °C (257 °F)	100 pA	240 µs	Push-Pull	-40 °C (-40 °F)	Nickel/Palladium/Gold	Dual	R-PDIP-T8		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No	e4			0.386 in (9.81 mm)
LM393APSRE4	Texas Instruments	Comparator	Commercial	Gull Wing	8	SOP	Rectangular		Plastic/Epoxy		4 mV	-400 nA	Yes	2	BIPOLAR		2.5 mA			5 V	5 V	Small Outline	SOP8,.3	Comparators	36 V	0.05 in (1.27 mm)	70 °C (158 °F)	250 nA	1.3 µs	Open-Collector	0 °C (32 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.079 in (2 mm)	0.209 in (5.3 mm)	No	e4	30 s	260 °C (500 °F)	0.244 in (6.2 mm)
LP311D	Texas Instruments	Comparator	Commercial	Gull Wing	8	SOP	Rectangular		Plastic/Epoxy	-18 V	7.5 mV	150 nA	Yes	1	BIPOLAR		300 μA	-15 V	Tube	15 V	±15 V	Small Outline	SOP8,.25	Comparators	18 V	0.05 in (1.27 mm)	70 °C (158 °F)	100 nA	1.2 µs	Open-Collector	0 °C (32 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4	30 s	260 °C (500 °F)	0.193 in (4.9 mm)
TLV7211AIDR	Texas Instruments	Comparator	Industrial	Gull Wing	8	SOP	Rectangular		Plastic/Epoxy	0 V	8 mV	0.04 pA	Yes	1	CMOS		14 μA	0 V	Tape And Reel	5 V	3/15 V	Small Outline	SOP8,.25	Comparators	16 V	0.05 in (1.27 mm)	85 °C (185 °F)	0.04 pA	10 µs	Push-Pull	-40 °C (-40 °F)	Nickel/Palladium/Gold	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4		260 °C (500 °F)	0.193 in (4.9 mm)
5962L0052401VPA	Texas Instruments	Comparator	Military	Pin/Peg	8	DIP	Rectangular	50k Rad(Si)	Ceramic, Metal-Sealed Cofired	-30 V	4 mV	1 nA	No	1	BIPOLAR	MIL-PRF-38535 Class V	6 mA	-15 V		15 V		In-Line		Comparators	30 V	0.1 in (2.54 mm)	125 °C (257 °F)	100 nA	200 ns	Open-Collector, Open-Drain	-55 °C (-67 °F)	Tin/Lead	Dual	R-CDIP-P8	1	0.2 in (5.08 mm)	0.3 in (7.62 mm)	Yes	e0			0.4 in (10.16 mm)
LM393TLX	Texas Instruments	Comparator	Commercial	Ball	8	VFBGA	Square		Plastic/Epoxy	0 V	9 mV	400 nA	Yes	2	BIPOLAR			0 V		5 V		Grid Array, Very Thin Profile, Fine Pitch		Comparators	36 V	0.02 in (0.5 mm)	70 °C (158 °F)		1.3 µs	Open-Collector	0 °C (32 °F)		Bottom	S-PBGA-B8	1	0.024 in (0.6 mm)	0.06 in (1.514 mm)	No			260 °C (500 °F)	0.06 in (1.514 mm)
TLC3702IPWLE	Texas Instruments	Comparator	Industrial	Gull Wing	8	TSSOP	Rectangular		Plastic/Epoxy		7 mV	2 nA	Yes	2	CMOS					5 V		Small Outline, Thin Profile, Shrink Pitch			18 V	0.026 in (0.65 mm)	85 °C (185 °F)		1.1 µs	Push-Pull	-40 °C (-40 °F)		Dual	R-PDSO-G8		0.047 in (1.2 mm)	0.118 in (3 mm)	No				0.173 in (4.4 mm)
SN52106L	Texas Instruments	Comparator	Military	Wire	8		Round		Metal						BIPOLAR						12,-3/-12 V	Cylindrical	CAN8,.2	Comparators			125 °C (257 °F)				-55 °C (-67 °F)		Bottom	O-MBCY-W8				No
LMV393PWLR	Texas Instruments	Comparator	Industrial	Gull Wing	8	TSSOP	Rectangular		Plastic/Epoxy		7 mV	400 nA	Yes	2						2.7 V		Small Outline, Thin Profile, Shrink Pitch		Comparators	5.5 V	0.026 in (0.65 mm)	85 °C (185 °F)		400 ns		-40 °C (-40 °F)		Dual	R-PDSO-G8		0.047 in (1.2 mm)	0.118 in (3 mm)	No				0.173 in (4.4 mm)
LM311DBLE	Texas Instruments	Comparator	Commercial	Gull Wing	8	SSOP	Rectangular		Plastic/Epoxy	-18 V	10 mV	300 nA	Yes	1	BIPOLAR		7.5 mA	-15 V		15 V	±15 V	Small Outline, Shrink Pitch	SSOP8,.3	Comparators	18 V	0.026 in (0.65 mm)	70 °C (158 °F)	250 nA	115 ns	Open-Collector, Open-Emitter	0 °C (32 °F)		Dual	R-PDSO-G8		0.079 in (2 mm)	0.118 in (3 mm)	No				0.209 in (5.3 mm)
LM2903P3	Texas Instruments	Comparator	Industrial	Through-Hole	8	DIP	Rectangular		Plastic/Epoxy		15 mV		No		BIPOLAR					5 V	5 V	In-Line	DIP8,.3	Comparators		0.1 in (2.54 mm)	85 °C (185 °F)				-40 °C (-40 °F)		Dual	R-PDIP-T8
5962R0052402VGA	Texas Instruments	Comparator	Military	Wire	8	TO-99	Round	50k Rad(Si)	Metal	-30 V	4 mV	1 nA	No	1	BIPOLAR	MIL-PRF-38535 Class V	6 mA	-15 V		15 V		Cylindrical		Comparators	30 V		125 °C (257 °F)	100 nA	200 ns	Open-Collector, Open-Drain	-55 °C (-67 °F)		Bottom	O-MBCY-W8	1			Yes
5962-9452601QPX	Texas Instruments	Comparator	Military	Through-Hole	8	DIP	Rectangular		Ceramic, Glass-Sealed		9 mV	-300 nA	No	2	BIPOLAR	MIL-PRF-38535 Class Q	2.5 mA			5 V		In-Line		Comparators	36 V	0.1 in (2.54 mm)	125 °C (257 °F)		1.3 µs	Open-Collector	-55 °C (-67 °F)	Tin Lead	Dual	R-GDIP-T8		0.2 in (5.08 mm)	0.3 in (7.62 mm)	Yes	e0			0.378 in (9.6 mm)
M38510/10304BPX	Texas Instruments	Comparator	Military	Through-Hole	8	DIP	Rectangular		Ceramic, Metal-Sealed Cofired	-18 V	4 mV	150 nA	No	1		MIL-M-38510 Class B		-15 V		15 V		In-Line		Comparators	18 V	0.1 in (2.54 mm)	125 °C (257 °F)		200 ns	Open-Collector	-55 °C (-67 °F)		Dual	R-CDIP-T8		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No
5962-554901NXDR	Texas Instruments	Comparator	Military	Gull Wing	8	SOP	Rectangular		Plastic/Epoxy		10 mV	20 nA	Yes	2	CMOS					5 V		Small Outline			18 V	0.05 in (1.27 mm)	125 °C (257 °F)		650 ns	Open-Drain	-55 °C (-67 °F)		Dual	R-PDSO-G8		0.069 in (1.75 mm)	0.154 in (3.9 mm)	No				0.193 in (4.9 mm)
SN52510L	Texas Instruments	Comparator	Military	Wire	8		Round		Metal						BIPOLAR							Cylindrical	CAN8,.2	Comparators			125 °C (257 °F)				-55 °C (-67 °F)		Bottom	O-MBCY-W8				No
LM293AJG	Texas Instruments	Comparator	Other	Through-Hole	8	DIP	Rectangular		Ceramic, Glass-Sealed		4 mV	400 nA	No	2	BIPOLAR		2.5 mA			5 V	5 V	In-Line	DIP8,.3	Comparators	36 V	0.1 in (2.54 mm)	85 °C (185 °F)	250 nA	1.3 µs	Open-Collector	-25 °C (-13 °F)		Dual	R-GDIP-T8		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No				0.378 in (9.6 mm)

Comparators

Comparators are electronic circuits that compare two input voltages and output a voltage signal that indicates which of the inputs is larger. A comparator is similar to an operational amplifier (op-amp), but it is designed to operate with a limited range of voltage outputs (typically near the power supply rails) and with very high gain.

A comparator typically has two input terminals, a non-inverting (+) input and an inverting (-) input, and one output. When the voltage at the non-inverting input is greater than the voltage at the inverting input, the output of the comparator switches to its maximum positive voltage. Conversely, when the voltage at the inverting input is greater than the voltage at the non-inverting input, the output of the comparator switches to its maximum negative voltage.

Comparators are often used in applications where a precise measurement or detection of voltage level is required, such as in voltage reference circuits, level detectors, and waveform generators. They can also be used to implement digital logic circuits and are frequently used in A/D converters and motor control circuits.

It is worth noting that a comparator output can switch quickly between its high and low states, so they can be sensitive to noise and require careful circuit design to ensure proper operation. In addition, some comparators may include features such as hysteresis, which can help to reduce noise and ensure stable operation in the presence of small fluctuations in the input signals.