Commercial Comparators 1,788

Reset All

Part	Manufacturer	Amplifier Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Maximum Negative Supply Voltage Limit	Maximum Input Offset Voltage	Maximum Average Bias Current (IIB)	Surface Mount	No. of Functions	Technology	Maximum Supply Current	Nominal Negative Supply Voltage (Vsup)	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Sub-Category	Maximum Supply Voltage Limit	Terminal Pitch	Maximum Operating Temperature	Maximum Bias Current (IIB) @25C	Nominal Response Time	Output Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length
LM393Y	Texas Instruments	Comparator	Commercial	No Lead						5 mV	-250 nA	Yes	2	BIPOLAR				5 V		Uncased Chip		Comparators	36 V		70 °C (158 °F)		1.3 µs	Open-Collector	0 °C (32 °F)		Upper	X-XUUC-N				No
TL820CJ4	Texas Instruments	Comparator	Commercial	Through-Hole	14	DIP	Rectangular	Ceramic				No		BIPOLAR						In-Line	DIP14,.3	Comparators		0.1 in (2.54 mm)	70 °C (158 °F)				0 °C (32 °F)		Dual	R-XDIP-T14
LT1011CJG	Texas Instruments	Comparator	Commercial	Through-Hole	8	DIP	Rectangular	Ceramic, Glass-Sealed	-18 V	3 mV	80 nA	No	1	BIPOLAR	4 mA	-15 V		15 V	±15 V	In-Line	DIP8,.3	Comparators	18 V	0.1 in (2.54 mm)	70 °C (158 °F)	50 nA	150 ns		0 °C (32 °F)		Dual	R-GDIP-T8		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No				0.378 in (9.6 mm)
TL710CP	Texas Instruments	Comparator	Commercial	Through-Hole	8	DIP	Rectangular	Plastic/Epoxy				No		BIPOLAR						In-Line	DIP8,.3	Comparators		0.1 in (2.54 mm)	70 °C (158 °F)				0 °C (32 °F)		Dual	R-PDIP-T8				No
TL712PW	Texas Instruments	Comparator	Commercial	Gull Wing	8	TSSOP	Rectangular	Plastic/Epoxy		1 mV		Yes	1	BIPOLAR	20 mA			5 V		Small Outline, Thin Profile, Shrink Pitch		Comparators	7 V	0.026 in (0.65 mm)	70 °C (158 °F)		25 ns	3-State	0 °C (32 °F)		Dual	R-PDSO-G8		0.047 in (1.2 mm)	0.118 in (3 mm)	No				0.173 in (4.4 mm)
SN72510P	Texas Instruments	Comparator	Commercial	Through-Hole	8	DIP	Rectangular	Plastic/Epoxy				No		BIPOLAR						In-Line	DIP8,.3	Comparators		0.1 in (2.54 mm)	70 °C (158 °F)				0 °C (32 °F)		Dual	R-PDIP-T8				No
LP311PSRG4	Texas Instruments	Comparator	Commercial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	-18 V	10 mV	150 nA	Yes	1			-15 V		15 V	±15 V	Small Outline	SOP8,.3	Comparators	18 V	0.05 in (1.27 mm)	70 °C (158 °F)	100 nA	1.2 µs	Open-Collector, Open-Emitter	0 °C (32 °F)		Dual	R-PDSO-G8		0.079 in (2 mm)	0.209 in (5.3 mm)	No				0.244 in (6.2 mm)
TL811CN3	Texas Instruments	Comparator	Commercial	Through-Hole	14	DIP	Rectangular	Plastic/Epoxy				No		BIPOLAR						In-Line	DIP14,.3	Comparators		0.1 in (2.54 mm)	70 °C (158 °F)				0 °C (32 °F)		Dual	R-PDIP-T14
SN72711N	Texas Instruments	Comparator	Commercial	Through-Hole	14	DIP	Rectangular	Plastic/Epoxy				No	2	BIPOLAR					12,-6 V	In-Line	DIP14,.3	Comparators		0.1 in (2.54 mm)	70 °C (158 °F)				0 °C (32 °F)		Dual	R-PDIP-T14				No
TLC374CPWLE	Texas Instruments	Comparator	Commercial	Gull Wing	14	TSSOP	Rectangular	Plastic/Epoxy		6.5 mV	600 pA	Yes	4	CMOS	800 μA			5 V	5/10 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP14,.25	Comparators	18 V	0.026 in (0.65 mm)	70 °C (158 °F)		650 ns	Open-Drain	0 °C (32 °F)		Dual	R-PDSO-G14		0.047 in (1.2 mm)	0.173 in (4.4 mm)	No				0.197 in (5 mm)
TLC352CPE4	Texas Instruments	Comparator	Commercial	Through-Hole	8	DIP	Rectangular	Plastic/Epoxy	0 V	6.5 mV	600 pA	No	2	CMOS	200 μA	0 V		5 V	5 V	In-Line	DIP8,.3	Comparators	18 V	0.1 in (2.54 mm)	70 °C (158 °F)	600 pA	650 ns	Open-Drain	0 °C (32 °F)	Nickel Palladium Gold	Dual	R-PDIP-T8	1	0.2 in (5.08 mm)	0.3 in (7.62 mm)	No	e4			0.386 in (9.81 mm)
TL510CJGP4	Texas Instruments	Comparator	Commercial	Through-Hole	8	DIP	Rectangular	Ceramic				No		BIPOLAR						In-Line	DIP8,.3	Comparators		0.1 in (2.54 mm)	70 °C (158 °F)				0 °C (32 °F)		Dual	R-XDIP-T8
TL506CW	Texas Instruments	Comparator	Commercial	Flat	14	DFP	Rectangular	Ceramic				Yes		BIPOLAR						Flatpack	FL14,.3	Comparators		0.05 in (1.27 mm)	70 °C (158 °F)				0 °C (32 °F)		Dual	R-XDFP-F14				No
LM306N/P3	Texas Instruments	Comparator	Commercial	Through-Hole	14	DIP	Rectangular	Plastic/Epoxy				No	1	BIPOLAR					12,-3/-12 V	In-Line	DIP14,.3	Comparators		0.1 in (2.54 mm)	70 °C (158 °F)				0 °C (32 °F)		Dual	R-PDIP-T14
TLC339CJ	Texas Instruments	Comparator	Commercial	Through-Hole	14	DIP	Rectangular	Ceramic, Glass-Sealed		6.5 mV	600 pA	No	4	CMOS	100 μA			5 V	5 V	In-Line	DIP14,.3	Comparators	18 V	0.1 in (2.54 mm)	70 °C (158 °F)	600 pA	1.1 µs	Open-Drain	0 °C (32 °F)		Dual	R-GDIP-T14		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No				0.77 in (19.56 mm)
TLC3702CPSLE	Texas Instruments	Comparator	Commercial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy		6.5 mV	600 pA	Yes	2	CMOS				5 V		Small Outline		Comparators	18 V	0.05 in (1.27 mm)	70 °C (158 °F)		2.7 µs	Push-Pull	0 °C (32 °F)		Dual	R-PDSO-G8		0.079 in (2 mm)	0.209 in (5.3 mm)	No				0.244 in (6.2 mm)
5962-00-251-7626	Texas Instruments	Comparator	Commercial	Through-Hole	14	DIP	Rectangular	Plastic/Epoxy				No		BIPOLAR						In-Line	DIP14,.3	Comparators		0.1 in (2.54 mm)	70 °C (158 °F)				0 °C (32 °F)		Dual	R-PDIP-T14				No
LM393AD3	Texas Instruments	Comparator	Commercial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy		4 mV		Yes	2	BIPOLAR				5 V	5 V	Small Outline	SOP8,.25	Comparators		0.05 in (1.27 mm)	70 °C (158 °F)				0 °C (32 °F)		Dual	R-PDSO-G8
TLC339CDBRG4	Texas Instruments	Comparator	Commercial	Gull Wing	14	SSOP	Rectangular	Plastic/Epoxy		6.5 mV	600 pA	Yes	4	CMOS	100 μA			5 V	5 V	Small Outline, Shrink Pitch	SSOP14,.3	Comparators	18 V	0.026 in (0.65 mm)	70 °C (158 °F)		2.5 µs	Open-Drain	0 °C (32 °F)		Dual	R-PDSO-G14		0.079 in (2 mm)	0.209 in (5.3 mm)	No				0.244 in (6.2 mm)
TL336CN	Texas Instruments	Comparator	Commercial	Through-Hole	20	DIP	Rectangular	Plastic/Epoxy				No		BIPOLAR						In-Line	DIP20,.3	Comparators		0.1 in (2.54 mm)	70 °C (158 °F)				0 °C (32 °F)		Dual	R-PDIP-T20				No
TLV3404CPW	Texas Instruments	Comparator	Commercial	Gull Wing	14	TSSOP	Rectangular	Plastic/Epoxy	0 V	4.4 mV	1.5 nA	Yes	4		2.56 μA	0 V	Tube	2.7 V	±1.25/±8/2.5/16 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP14,.25	Comparators	17 V	0.026 in (0.65 mm)	70 °C (158 °F)	100 pA	175 µs	Open-Drain	0 °C (32 °F)	Nickel/Palladium/Gold	Dual	R-PDSO-G14	1	0.047 in (1.2 mm)	0.173 in (4.4 mm)	No	e4		260 °C (500 °F)	0.197 in (5 mm)
TL712CJG	Texas Instruments	Comparator	Commercial	Through-Hole	8	DIP	Rectangular	Ceramic, Glass-Sealed		1 mV		No	1	BIPOLAR	20 mA			5 V	5 V	In-Line	DIP8,.3	Comparators	7 V	0.1 in (2.54 mm)	70 °C (158 °F)		25 ns	3-State	0 °C (32 °F)		Dual	R-GDIP-T8		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No				0.378 in (9.6 mm)
LM393DE4	Texas Instruments	Comparator	Commercial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy		9 mV	-400 nA	Yes	2	BIPOLAR	1 mA		Tube	5 V	5/30 V	Small Outline	SOP8,.25	Comparators	36 V	0.05 in (1.27 mm)	70 °C (158 °F)	50 nA	1.3 µs	Open-Collector	0 °C (32 °F)	Nickel/Palladium/Gold	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4		260 °C (500 °F)	0.193 in (4.9 mm)
TLC374Y	Texas Instruments	Comparator	Commercial	No Lead	14	DIE	Rectangular			5 mV	20 nA	Yes	4	CMOS				5 V		Uncased Chip		Comparators	18 V		70 °C (158 °F)		650 ns	Open-Drain	0 °C (32 °F)		Upper	R-XUUC-N14				No
TL336CJP4	Texas Instruments	Comparator	Commercial	Through-Hole	20	DIP	Rectangular	Ceramic				No		BIPOLAR						In-Line	DIP20,.3	Comparators		0.1 in (2.54 mm)	70 °C (158 °F)				0 °C (32 °F)		Dual	R-XDIP-T20
TL810CJGP4	Texas Instruments	Comparator	Commercial	Through-Hole	8	DIP	Rectangular	Ceramic				No		BIPOLAR						In-Line	DIP8,.3	Comparators		0.1 in (2.54 mm)	70 °C (158 °F)				0 °C (32 °F)		Dual	R-XDIP-T8
TL712CP3	Texas Instruments	Comparator	Commercial	Through-Hole	8	DIP	Rectangular	Plastic/Epoxy				No		BIPOLAR	20 mA			5 V	5 V	In-Line	DIP8,.3	Comparators		0.1 in (2.54 mm)	70 °C (158 °F)				0 °C (32 °F)		Dual	R-PDIP-T8
TL712CPWRE4	Texas Instruments	Comparator	Commercial	Gull Wing	8	TSSOP	Rectangular	Plastic/Epoxy		1 mV	600 uA	Yes	1	BIPOLAR	20 mA		Tape And Reel	5 V	5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.25	Comparators	7 V	0.026 in (0.65 mm)	70 °C (158 °F)	600 uA	25 ns	3-State	0 °C (32 °F)	Nickel/Palladium/Gold	Dual	R-PDSO-G8	1	0.047 in (1.2 mm)	0.118 in (3 mm)	No	e4		260 °C (500 °F)	0.173 in (4.4 mm)
UA711CN	Texas Instruments	Comparator	Commercial	Through-Hole	14	DIP	Rectangular	Plastic/Epoxy	-7 V	10 mV	150 uA	No	2	BIPOLAR		-6 V		12 V		In-Line	DIP14,.3		14 V		70 °C (158 °F)	100 uA	40 ns	Open-Collector	0 °C (32 °F)		Dual	R-PDIP-T14				No
TL820CJP4	Texas Instruments	Comparator	Commercial	Through-Hole	14	DIP	Rectangular	Ceramic				No		BIPOLAR						In-Line	DIP14,.3	Comparators		0.1 in (2.54 mm)	70 °C (158 °F)				0 °C (32 °F)		Dual	R-XDIP-T14
TLC374CJ	Texas Instruments	Comparator	Commercial	Through-Hole	14	DIP	Rectangular	Ceramic, Glass-Sealed		6.5 mV	600 pA	No	4	CMOS	800 μA			5 V	5 V	In-Line	DIP14,.3	Comparators	18 V	0.1 in (2.54 mm)	70 °C (158 °F)	600 pA	650 ns	Open-Drain	0 °C (32 °F)		Dual	R-GDIP-T14		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No				0.77 in (19.56 mm)
SN72810J	Texas Instruments	Comparator	Commercial	Through-Hole	14	DIP	Rectangular	Ceramic				No		BIPOLAR						In-Line	DIP14,.3	Comparators		0.1 in (2.54 mm)	70 °C (158 °F)				0 °C (32 °F)		Dual	R-XDIP-T14				No
LM393PSE4	Texas Instruments	Comparator	Commercial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	0 V	9 mV	-400 nA	Yes	2	BIPOLAR		0 V		5 V		Small Outline		Comparators	36 V	0.05 in (1.27 mm)	70 °C (158 °F)		1.3 µs	Open-Collector	0 °C (32 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.079 in (2 mm)	0.209 in (5.3 mm)	No	e4	30 s	260 °C (500 °F)	0.244 in (6.2 mm)
LM393APWLE	Texas Instruments	Comparator	Commercial	Gull Wing	8	TSSOP	Rectangular	Plastic/Epoxy		4 mV	-400 nA	Yes	2	BIPOLAR	2.5 mA			5 V	5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.25	Comparators	36 V	0.026 in (0.65 mm)	70 °C (158 °F)	250 nA	1.3 µs	Open-Collector	0 °C (32 °F)		Dual	R-PDSO-G8		0.047 in (1.2 mm)	0.118 in (3 mm)	No				0.173 in (4.4 mm)
LP339DRG4	Texas Instruments	Comparator	Commercial	Gull Wing	14	SOP	Rectangular	Plastic/Epoxy		9 mV	40 nA	Yes	4	BIPOLAR	100 μA		Tape And Reel	5 V	5 V	Small Outline	SOP14,.25	Comparators	36 V	0.05 in (1.27 mm)	70 °C (158 °F)	25 nA	1.3 µs	Open-Collector	0 °C (32 °F)	Nickel/Palladium/Gold	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4		260 °C (500 °F)	0.341 in (8.65 mm)
LM339ANS	Texas Instruments	Comparator	Commercial	Gull Wing	14	SOP	Rectangular	Plastic/Epoxy	0 V	4 mV	-400 nA	Yes	4	BIPOLAR		0 V		5 V		Small Outline		Comparators	36 V	0.05 in (1.27 mm)	70 °C (158 °F)		1.3 µs	Open-Collector	0 °C (32 °F)	Nickel Palladium Gold	Dual	R-PDSO-G14	1	0.079 in (2 mm)	0.209 in (5.3 mm)	No	e4	30 s	260 °C (500 °F)	0.402 in (10.2 mm)
TL514CJ	Texas Instruments	Comparator	Commercial	Through-Hole	14	DIP	Rectangular	Ceramic				No		BIPOLAR						In-Line	DIP14,.3	Comparators		0.1 in (2.54 mm)	70 °C (158 °F)				0 °C (32 °F)		Dual	R-XDIP-T14				No
TL506CN	Texas Instruments	Comparator	Commercial	Through-Hole	14	DIP	Rectangular	Plastic/Epoxy				No		BIPOLAR						In-Line	DIP14,.3	Comparators		0.1 in (2.54 mm)	70 °C (158 °F)				0 °C (32 °F)		Dual	R-PDIP-T14				No
SN72306N	Texas Instruments	Comparator	Commercial	Through-Hole	14	DIP	Rectangular	Plastic/Epoxy				No	1	BIPOLAR					12,-3/-12 V	In-Line	DIP14,.3	Comparators		0.1 in (2.54 mm)	70 °C (158 °F)				0 °C (32 °F)		Dual	R-PDIP-T14				No
TLC352CD	Texas Instruments	Comparator	Commercial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	0 V	5 mV	600 pA	Yes	2	CMOS	300 μA	0 V	Tube	5 V	5 V	Small Outline	SOP8,.25	Comparators	18 V	0.05 in (1.27 mm)	70 °C (158 °F)	20 nA	650 ns	Open-Collector	0 °C (32 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4	30 s	260 °C (500 °F)	0.193 in (4.9 mm)
LP311PE4	Texas Instruments	Comparator	Commercial	Through-Hole	8	DIP	Rectangular	Plastic/Epoxy	-18 V	7.5 mV	150 nA	No	1	BIPOLAR	300 μA	-15 V	Tube	15 V	±15 V	In-Line	DIP8,.3	Comparators	18 V	0.1 in (2.54 mm)	70 °C (158 °F)	100 nA	1.2 µs	Open-Collector	0 °C (32 °F)	Nickel Palladium Gold	Dual	R-PDIP-T8	1	0.2 in (5.08 mm)	0.3 in (7.62 mm)	No	e4			0.386 in (9.81 mm)
LM393JG	Texas Instruments	Comparator	Commercial	Through-Hole	8	DIP	Rectangular	Ceramic, Glass-Sealed		9 mV	400 nA	No	2	BIPOLAR	2.5 mA			5 V	5 V	In-Line	DIP8,.3	Comparators		0.1 in (2.54 mm)	70 °C (158 °F)	250 nA	1.3 µs	Open-Collector	0 °C (32 °F)		Dual	R-GDIP-T8		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No				0.378 in (9.6 mm)
TLC3702CPSRG4	Texas Instruments	Comparator	Commercial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy		6.5 mV	600 pA	Yes	2	CMOS	40 μA		Tape And Reel	5 V	5 V	Small Outline	SOP8,.3	Comparators	18 V	0.05 in (1.27 mm)	70 °C (158 °F)	30 pA	2.7 µs	Push-Pull	0 °C (32 °F)	Nickel/Palladium/Gold	Dual	R-PDSO-G8	1	0.079 in (2 mm)	0.209 in (5.3 mm)	No	e4		260 °C (500 °F)	0.244 in (6.2 mm)
LM311JG	Texas Instruments	Comparator	Commercial	Through-Hole	8	DIP	Rectangular	Ceramic, Glass-Sealed		10 mV	300 nA	No	1	BIPOLAR	7.5 mA	-15 V		15 V	±15 V	In-Line	DIP8,.3	Comparators		0.1 in (2.54 mm)	70 °C (158 °F)		115 ns	Open-Collector, Open-Emitter	0 °C (32 °F)		Dual	R-GDIP-T8		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No				0.378 in (9.6 mm)
LM393D3	Texas Instruments	Comparator	Commercial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy		9 mV		Yes	2	BIPOLAR				5 V	5 V	Small Outline	SOP8,.25	Comparators		0.05 in (1.27 mm)	70 °C (158 °F)				0 °C (32 °F)		Dual	R-PDSO-G8
TLC3704CDBLE	Texas Instruments	Comparator	Commercial	Gull Wing	14	SSOP	Rectangular	Plastic/Epoxy		6.5 mV	600 pA	Yes	4	CMOS				5 V		Small Outline, Shrink Pitch			18 V	0.026 in (0.65 mm)	70 °C (158 °F)		1.1 µs	Push-Pull	0 °C (32 °F)		Dual	R-PDSO-G14		0.079 in (2 mm)	0.209 in (5.3 mm)	No				0.244 in (6.2 mm)
LM393AJG	Texas Instruments	Comparator	Commercial	Through-Hole	8	DIP	Rectangular	Ceramic, Glass-Sealed		4 mV	400 nA	No	2	BIPOLAR	2.5 mA			5 V	5 V	In-Line	DIP8,.3	Comparators	36 V	0.1 in (2.54 mm)	70 °C (158 °F)	250 nA	1.3 µs	Open-Collector	0 °C (32 °F)		Dual	R-GDIP-T8		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No				0.378 in (9.6 mm)
LM306P	Texas Instruments	Comparator	Commercial	Through-Hole	8	DIP	Rectangular	Plastic/Epoxy	-15 V	5 mV	40 uA	No	1	BIPOLAR	10 mA	-12 V	Tube	12 V	12,-3/-12 V	In-Line	DIP8,.3	Comparators	15 V	0.1 in (2.54 mm)	70 °C (158 °F)	25 uA	28 ns	Open-Collector	0 °C (32 °F)	Nickel Palladium Gold	Dual	R-PDIP-T8		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No	e4			0.386 in (9.81 mm)

Comparators

Comparators are electronic circuits that compare two input voltages and output a voltage signal that indicates which of the inputs is larger. A comparator is similar to an operational amplifier (op-amp), but it is designed to operate with a limited range of voltage outputs (typically near the power supply rails) and with very high gain.

A comparator typically has two input terminals, a non-inverting (+) input and an inverting (-) input, and one output. When the voltage at the non-inverting input is greater than the voltage at the inverting input, the output of the comparator switches to its maximum positive voltage. Conversely, when the voltage at the inverting input is greater than the voltage at the non-inverting input, the output of the comparator switches to its maximum negative voltage.

Comparators are often used in applications where a precise measurement or detection of voltage level is required, such as in voltage reference circuits, level detectors, and waveform generators. They can also be used to implement digital logic circuits and are frequently used in A/D converters and motor control circuits.

It is worth noting that a comparator output can switch quickly between its high and low states, so they can be sensitive to noise and require careful circuit design to ensure proper operation. In addition, some comparators may include features such as hysteresis, which can help to reduce noise and ensure stable operation in the presence of small fluctuations in the input signals.