Commercial Comparators 1,788

Reset All
Part RoHS Manufacturer Amplifier Type Temperature Grade Terminal Form No. of Terminals Package Code Package Shape Total Dose (V) Package Body Material Nominal Unity Gain Bandwidth Maximum Negative Supply Voltage Limit Maximum Input Offset Voltage Maximum Average Bias Current (IIB) Surface Mount No. of Functions Minimum Common Mode Reject Ratio Technology Screening Level Nominal Common Mode Reject Ratio Maximum Supply Current Nominal Negative Supply Voltage (Vsup) Minimum Isolation Voltage Packing Method Nominal Supply Voltage / Vsup (V) Power Supplies (V) Package Style (Meter) Package Equivalence Code Sub-Category Nominal Slow Rate Maximum Supply Voltage Limit Terminal Pitch Maximum Operating Temperature Maximum Bias Current (IIB) @25C Maximum Common Mode Voltage Nominal Response Time Output Type Minimum Operating Temperature Terminal Finish Terminal Position JESD-30 Code Moisture Sensitivity Level (MSL) Maximum Seated Height Width Qualification Nominal Bandwidth (3dB) JESD-609 Code Maximum Time At Peak Reflow Temperature (s) Peak Reflow Temperature (C) Length

TL506CJ4

Texas Instruments

Comparator

Commercial

Through-Hole

14

DIP

Rectangular

Ceramic

No

BIPOLAR

In-Line

DIP14,.3

Comparators

0.1 in (2.54 mm)

70 °C (158 °F)

0 °C (32 °F)

Dual

R-XDIP-T14

TL3016CPWLE

Texas Instruments

Comparator

Commercial

Gull Wing

8

TSSOP

Rectangular

Plastic/Epoxy

-7 V

3.5 mV

10 uA

Yes

1

BIPOLAR

12.5 mA

-5 V

5 V

5/±5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.25

Comparators

7 V

0.026 in (0.65 mm)

70 °C (158 °F)

7.5 uA

7.8 µs

0 °C (32 °F)

Dual

R-PDSO-G8

0.047 in (1.2 mm)

0.118 in (3 mm)

No

0.173 in (4.4 mm)

TL714CPE4

Texas Instruments

Comparator

Commercial

Through-Hole

8

DIP

Rectangular

Plastic/Epoxy

No

1

BIPOLAR

12 mA

5 V

5 V

In-Line

DIP8,.3

Comparators

7 V

0.1 in (2.54 mm)

70 °C (158 °F)

6 ns

Totem Pole

0 °C (32 °F)

Nickel Palladium Gold

Dual

R-PDIP-T8

1

0.2 in (5.08 mm)

0.3 in (7.62 mm)

No

e4

0.386 in (9.81 mm)

LP339DG4

Texas Instruments

Comparator

Commercial

Gull Wing

14

SOP

Rectangular

Plastic/Epoxy

9 mV

40 nA

Yes

4

BIPOLAR

100 μA

Tube

5 V

5 V

Small Outline

SOP14,.25

Comparators

36 V

0.05 in (1.27 mm)

70 °C (158 °F)

25 nA

1.3 µs

Open-Collector

0 °C (32 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G14

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

260 °C (500 °F)

0.341 in (8.65 mm)

LM339JP4

Texas Instruments

Comparator

Commercial

Through-Hole

14

DIP

Rectangular

Ceramic

9 mV

No

BIPOLAR

2 mA

5 V

5 V

In-Line

DIP14,.3

Comparators

0.1 in (2.54 mm)

70 °C (158 °F)

1.3 µs

0 °C (32 °F)

Dual

R-XDIP-T14

TL311N

Texas Instruments

Comparator

Commercial

Through-Hole

14

DIP

Rectangular

Plastic/Epoxy

13 mV

No

-15 V

15 V

±15 V

In-Line

DIP14,.3

Comparators

0.1 in (2.54 mm)

70 °C (158 °F)

250 pA

165 ns

0 °C (32 °F)

Dual

R-PDIP-T14

No

TLC354CPW

Texas Instruments

Comparator

Commercial

Gull Wing

14

TSSOP

Rectangular

Plastic/Epoxy

5 mV

600 pA

Yes

4

CMOS

600 μA

Tube

5 V

5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP14,.25

Comparators

18 V

0.026 in (0.65 mm)

70 °C (158 °F)

20 nA

650 ns

Open-Collector

0 °C (32 °F)

Nickel Palladium Gold

Dual

R-PDSO-G14

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e4

30 s

260 °C (500 °F)

0.197 in (5 mm)

TL810CJ

Texas Instruments

Comparator

Commercial

Through-Hole

14

DIP

Rectangular

Ceramic

No

BIPOLAR

In-Line

DIP14,.3

Comparators

0.1 in (2.54 mm)

70 °C (158 °F)

0 °C (32 °F)

Dual

R-XDIP-T14

No

LP311PSRE4

Texas Instruments

Comparator

Commercial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-18 V

10 mV

150 nA

Yes

1

BIPOLAR

-15 V

15 V

±15 V

Small Outline

SOP8,.3

Comparators

18 V

0.05 in (1.27 mm)

70 °C (158 °F)

100 nA

1.2 µs

Open-Collector, Open-Emitter

0 °C (32 °F)

Dual

R-PDSO-G8

0.079 in (2 mm)

0.209 in (5.3 mm)

No

0.244 in (6.2 mm)

TL811CJ

Texas Instruments

Comparator

Commercial

Through-Hole

14

DIP

Rectangular

Ceramic

No

BIPOLAR

In-Line

DIP14,.3

Comparators

0.1 in (2.54 mm)

70 °C (158 °F)

0 °C (32 °F)

Dual

R-XDIP-T14

No

LM393TL

Texas Instruments

Comparator

Commercial

Ball

8

VFBGA

Square

Plastic/Epoxy

0 V

9 mV

400 nA

Yes

2

BIPOLAR

0 V

5 V

Grid Array, Very Thin Profile, Fine Pitch

Comparators

36 V

0.02 in (0.5 mm)

70 °C (158 °F)

1.3 µs

Open-Collector

0 °C (32 °F)

Bottom

S-PBGA-B8

1

0.024 in (0.6 mm)

0.06 in (1.514 mm)

No

260 °C (500 °F)

0.06 in (1.514 mm)

TL714CDR

Texas Instruments

Comparator

Commercial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

10 mV

600 uA

Yes

1

BIPOLAR

12 mA

Tape And Reel

5 V

5 V

Small Outline

SOP8,.25

Comparators

7 V

0.05 in (1.27 mm)

70 °C (158 °F)

600 uA

6 ns

Push-Pull

0 °C (32 °F)

Nickel Palladium Gold

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

LM339MWA

Texas Instruments

Comparator

Commercial

No Lead

9 mV

400 nA

Yes

4

BIPOLAR

5 V

Uncased Chip

Comparators

36 V

70 °C (158 °F)

1.3 µs

Open-Collector

0 °C (32 °F)

Upper

X-XUUC-N

No

TLV3402CDR

Texas Instruments

Comparator

Commercial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

0 V

4.4 mV

1.5 nA

Yes

2

1.28 μA

0 V

Tape And Reel

2.7 V

±1.25/±8/2.5/16 V

Small Outline

SOP8,.25

Comparators

17 V

0.05 in (1.27 mm)

70 °C (158 °F)

100 pA

175 µs

Open-Drain

0 °C (32 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

260 °C (500 °F)

0.193 in (4.9 mm)

TL712JG

Texas Instruments

Comparator

Commercial

Through-Hole

8

DIP

Rectangular

Ceramic, Glass-Sealed

1 mV

No

1

BIPOLAR

20 mA

5 V

In-Line

Comparators

7 V

0.1 in (2.54 mm)

70 °C (158 °F)

25 ns

3-State

0 °C (32 °F)

Dual

R-GDIP-T8

0.2 in (5.08 mm)

0.3 in (7.62 mm)

No

0.378 in (9.6 mm)

TL331CDP3

Texas Instruments

Comparator

Commercial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

Yes

BIPOLAR

5/30 V

Small Outline

SOP8,.25

Comparators

0.05 in (1.27 mm)

70 °C (158 °F)

0 °C (32 °F)

Dual

R-PDSO-G8

SN72711L

Texas Instruments

Comparator

Commercial

Wire

10

Round

Metal

2

BIPOLAR

12,-6 V

Cylindrical

CAN10,.23

Comparators

70 °C (158 °F)

0 °C (32 °F)

Bottom

O-MBCY-W10

No

TL331CJG

Texas Instruments

Comparator

Commercial

Through-Hole

8

DIP

Rectangular

Ceramic, Glass-Sealed

9 mV

-400 nA

No

1

BIPOLAR

800 μA

5 V

5/30 V

In-Line

DIP8,.3

Comparators

0.1 in (2.54 mm)

70 °C (158 °F)

1.3 µs

Open-Collector

0 °C (32 °F)

Dual

R-GDIP-T8

0.2 in (5.08 mm)

0.3 in (7.62 mm)

No

0.378 in (9.6 mm)

TL810CJ4

Texas Instruments

Comparator

Commercial

Through-Hole

14

DIP

Rectangular

Ceramic

No

BIPOLAR

In-Line

DIP14,.3

Comparators

0.1 in (2.54 mm)

70 °C (158 °F)

0 °C (32 °F)

Dual

R-XDIP-T14

LP311PWLE

Texas Instruments

Comparator

Commercial

Gull Wing

8

TSSOP

Rectangular

Plastic/Epoxy

-18 V

10 mV

150 nA

Yes

1

BIPOLAR

300 μA

-15 V

15 V

±15 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.25

Comparators

18 V

0.026 in (0.65 mm)

70 °C (158 °F)

100 nA

1.2 µs

Open-Collector, Open-Emitter

0 °C (32 °F)

Dual

R-PDSO-G8

0.047 in (1.2 mm)

0.118 in (3 mm)

No

0.173 in (4.4 mm)

TLC354CJ

Texas Instruments

Comparator

Commercial

Through-Hole

14

DIP

Rectangular

Ceramic, Glass-Sealed

12 mV

600 pA

No

4

CMOS

800 μA

5 V

5 V

In-Line

DIP14,.3

Comparators

18 V

0.1 in (2.54 mm)

70 °C (158 °F)

600 pA

650 ns

Open-Drain

0 °C (32 °F)

Dual

R-GDIP-T14

0.2 in (5.08 mm)

0.3 in (7.62 mm)

No

0.77 in (19.56 mm)

SN72811N

Texas Instruments

Comparator

Commercial

Through-Hole

14

DIP

Rectangular

Plastic/Epoxy

No

BIPOLAR

In-Line

DIP14,.3

Comparators

0.1 in (2.54 mm)

70 °C (158 °F)

0 °C (32 °F)

Dual

R-PDIP-T14

No

TL331CD

Texas Instruments

Comparator

Commercial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

0 V

9 mV

-400 nA

Yes

1

BIPOLAR

800 μA

0 V

5 V

5/30 V

Small Outline

SOP8,.25

Comparators

36 V

0.05 in (1.27 mm)

70 °C (158 °F)

1.3 µs

Open-Collector

0 °C (32 °F)

Dual

R-PDSO-G8

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

0.193 in (4.9 mm)

5962-01-302-9115

Texas Instruments

Comparator

Commercial

Through-Hole

8

DIP

Rectangular

Plastic/Epoxy

No

BIPOLAR

In-Line

DIP8,.3

Comparators

0.1 in (2.54 mm)

70 °C (158 °F)

0 °C (32 °F)

Dual

R-PDIP-T8

No

TLC354CY

Texas Instruments

Comparator

Commercial

No Lead

14

DIE

5 mV

Yes

4

CMOS

600 μA

5 V

Uncased Chip

Comparators

18 V

70 °C (158 °F)

650 ns

Open-Drain

0 °C (32 °F)

Upper

X-XUUC-N14

No

TLV3702CD

Texas Instruments

Comparator

Commercial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

0 V

7 mV

1.5 nA

Yes

2

CMOS

1.6 μA

0 V

Tube

2.7 V

±1.25/±8/2.5/16 V

Small Outline

SOP8,.25

Comparators

17 V

0.05 in (1.27 mm)

70 °C (158 °F)

100 pA

240 µs

Push-Pull

0 °C (32 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

260 °C (500 °F)

0.193 in (4.9 mm)

5962-00-328-0244

Texas Instruments

Comparator

Commercial

Through-Hole

14

DIP

Rectangular

Ceramic

No

BIPOLAR

In-Line

DIP14,.3

Comparators

0.1 in (2.54 mm)

70 °C (158 °F)

0 °C (32 °F)

Dual

R-XDIP-T14

No

TL311AJ

Texas Instruments

Comparator

Commercial

Through-Hole

14

DIP

Rectangular

Ceramic

10 mV

No

-15 V

15 V

±15 V

In-Line

DIP14,.3

Comparators

0.1 in (2.54 mm)

70 °C (158 °F)

250 pA

165 ns

0 °C (32 °F)

Dual

R-XDIP-T14

No

TL712CDRE4

Texas Instruments

Comparator

Commercial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

5 mV

Yes

1

BIPOLAR

20 mA

5 V

5 V

Small Outline

SOP8,.25

Comparators

7 V

0.05 in (1.27 mm)

70 °C (158 °F)

25 ns

3-State

0 °C (32 °F)

Nickel Palladium Gold

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

TLC3704CDG4

Texas Instruments

Comparator

Commercial

Gull Wing

14

SOP

Rectangular

Plastic/Epoxy

-18 V

6.5 mV

600 pA

Yes

4

CMOS

100 μA

5 V

5 V

Small Outline

SOP14,.25

Comparators

18 V

0.05 in (1.27 mm)

70 °C (158 °F)

2.7 µs

Push-Pull

0 °C (32 °F)

Nickel Palladium Gold

Dual

R-PDSO-G14

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

30 s

260 °C (500 °F)

0.341 in (8.65 mm)

TL510CJ4

Texas Instruments

Comparator

Commercial

Through-Hole

14

DIP

Rectangular

Ceramic

No

BIPOLAR

In-Line

DIP14,.3

Comparators

0.1 in (2.54 mm)

70 °C (158 °F)

0 °C (32 °F)

Dual

R-XDIP-T14

LM306DRG4

Texas Instruments

Comparator

Commercial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-15 V

6.5 mV

40 uA

Yes

1

BIPOLAR

10 mA

-12 V

12 V

12,-3/-12 V

Small Outline

SOP8,.25

Comparators

15 V

0.05 in (1.27 mm)

70 °C (158 °F)

40 uA

28 ns

Totem Pole

0 °C (32 °F)

Dual

R-PDSO-G8

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

0.193 in (4.9 mm)

TL714CDG4

Texas Instruments

Comparator

Commercial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

Yes

1

BIPOLAR

12 mA

5 V

5 V

Small Outline

SOP8,.25

Comparators

7 V

0.05 in (1.27 mm)

70 °C (158 °F)

6 ns

Totem Pole

0 °C (32 °F)

Nickel Palladium Gold

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

LP311JG

Texas Instruments

Comparator

Commercial

Through-Hole

8

DIP

Rectangular

Ceramic, Glass-Sealed

-18 V

10 mV

150 nA

No

1

BIPOLAR

300 μA

-15 V

15 V

±15 V

In-Line

DIP8,.3

Comparators

18 V

0.1 in (2.54 mm)

70 °C (158 °F)

100 nA

1.2 µs

Open-Collector, Open-Emitter

0 °C (32 °F)

Dual

R-GDIP-T8

0.2 in (5.08 mm)

0.3 in (7.62 mm)

No

0.378 in (9.6 mm)

LM306W

Texas Instruments

Comparator

Commercial

Flat

14

DFP

Rectangular

Ceramic

Yes

1

BIPOLAR

12,-3/-12 V

Flatpack

FL14,.3

Comparators

0.05 in (1.27 mm)

70 °C (158 °F)

0 °C (32 °F)

Dual

R-XDFP-F14

No

TLC371CY

Texas Instruments

Comparator

Commercial

No Lead

5

DIE

5 mV

100 pA

Yes

1

CMOS

150 μA

5 V

Uncased Chip

70 °C (158 °F)

650 ns

Open-Drain

0 °C (32 °F)

Upper

X-XUUC-N5

No

TLV3702CDG4

Texas Instruments

Comparator

Commercial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

0 V

7 mV

1.5 nA

Yes

2

CMOS

2 μA

0 V

2.7 V

±1.25/±8/2.5/16 V

Small Outline

SOP8,.25

Comparators

17 V

0.05 in (1.27 mm)

70 °C (158 °F)

250 pA

240 µs

Push-Pull

0 °C (32 °F)

Nickel Palladium Gold

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

TL810CP3

Texas Instruments

Comparator

Commercial

Through-Hole

8

DIP

Rectangular

Plastic/Epoxy

No

BIPOLAR

In-Line

DIP8,.3

Comparators

0.1 in (2.54 mm)

70 °C (158 °F)

0 °C (32 °F)

Dual

R-PDIP-T8

TL714CDE4

Texas Instruments

Comparator

Commercial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

Yes

1

BIPOLAR

20 mA

5 V

5 V

Small Outline

SOP8,.25

Comparators

7 V

0.05 in (1.27 mm)

70 °C (158 °F)

6 ns

Totem Pole

0 °C (32 °F)

Nickel Palladium Gold

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

LT1016CL

Texas Instruments

Comparator

Commercial

Wire

10

Round

Metal

-7 V

3.5 mV

13 uA

No

1

BIPOLAR

35 mA

-5 V

5 V

±5 V

Cylindrical

CAN10,.23

Comparators

7 V

70 °C (158 °F)

10 uA

10 ns

0 °C (32 °F)

Bottom

O-MBCY-W10

No

LM311J

Texas Instruments

Comparator

Commercial

Through-Hole

14

DIP

Rectangular

Ceramic

10 mV

No

1

BIPOLAR

-15 V

15 V

±15 V

In-Line

DIP14,.3

Comparators

0.1 in (2.54 mm)

70 °C (158 °F)

0 °C (32 °F)

Dual

R-XDIP-T14

No

TLC3704CDB

Texas Instruments

Comparator

Commercial

Gull Wing

14

SSOP

Rectangular

Plastic/Epoxy

6.5 mV

600 pA

Yes

4

CMOS

5 V

Small Outline, Shrink Pitch

18 V

0.026 in (0.65 mm)

70 °C (158 °F)

2.7 µs

Push-Pull

0 °C (32 °F)

Dual

R-PDSO-G14

0.079 in (2 mm)

0.209 in (5.3 mm)

No

0.244 in (6.2 mm)

TL721DR

Texas Instruments

Comparator

Commercial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-7 V

1 mV

Yes

1

BIPOLAR

17 mA

-5.2 V

Small Outline

0.05 in (1.27 mm)

70 °C (158 °F)

Open-Emitter

0 °C (32 °F)

Dual

R-PDSO-G8

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

0.193 in (4.9 mm)

LM306JG/P4

Texas Instruments

Comparator

Commercial

Through-Hole

8

DIP

Rectangular

Ceramic

No

1

BIPOLAR

12,-3/-12 V

In-Line

DIP8,.3

Comparators

0.1 in (2.54 mm)

70 °C (158 °F)

0 °C (32 °F)

Dual

R-XDIP-T8

LM319NP3

Texas Instruments

Comparator

Commercial

Through-Hole

14

DIP

Rectangular

Plastic/Epoxy

10 mV

No

BIPOLAR

-15 V

15 V

±15 V

In-Line

DIP14,.3

Comparators

0.1 in (2.54 mm)

70 °C (158 °F)

0 °C (32 °F)

Dual

R-PDIP-T14

TL336CN3

Texas Instruments

Comparator

Commercial

Through-Hole

20

DIP

Rectangular

Plastic/Epoxy

No

BIPOLAR

In-Line

DIP20,.3

Comparators

0.1 in (2.54 mm)

70 °C (158 °F)

0 °C (32 °F)

Dual

R-PDIP-T20

TLC372CPWG4

Texas Instruments

Comparator

Commercial

Gull Wing

8

TSSOP

Rectangular

Plastic/Epoxy

6.5 mV

600 pA

Yes

2

CMOS

400 μA

5 V

5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.25

Comparators

18 V

0.026 in (0.65 mm)

70 °C (158 °F)

650 ns

Open-Drain

0 °C (32 °F)

Nickel Palladium Gold

Dual

R-PDSO-G8

1

0.047 in (1.2 mm)

0.118 in (3 mm)

No

e4

30 s

260 °C (500 °F)

0.173 in (4.4 mm)

SN72720N

Texas Instruments

Comparator

Commercial

Through-Hole

14

DIP

Rectangular

Plastic/Epoxy

No

BIPOLAR

In-Line

DIP14,.3

Comparators

0.1 in (2.54 mm)

70 °C (158 °F)

0 °C (32 °F)

Dual

R-PDIP-T14

No

Comparators

Comparators are electronic circuits that compare two input voltages and output a voltage signal that indicates which of the inputs is larger. A comparator is similar to an operational amplifier (op-amp), but it is designed to operate with a limited range of voltage outputs (typically near the power supply rails) and with very high gain.

A comparator typically has two input terminals, a non-inverting (+) input and an inverting (-) input, and one output. When the voltage at the non-inverting input is greater than the voltage at the inverting input, the output of the comparator switches to its maximum positive voltage. Conversely, when the voltage at the inverting input is greater than the voltage at the non-inverting input, the output of the comparator switches to its maximum negative voltage.

Comparators are often used in applications where a precise measurement or detection of voltage level is required, such as in voltage reference circuits, level detectors, and waveform generators. They can also be used to implement digital logic circuits and are frequently used in A/D converters and motor control circuits.

It is worth noting that a comparator output can switch quickly between its high and low states, so they can be sensitive to noise and require careful circuit design to ensure proper operation. In addition, some comparators may include features such as hysteresis, which can help to reduce noise and ensure stable operation in the presence of small fluctuations in the input signals.