Commercial Comparators 1,788

Reset All
Part RoHS Manufacturer Amplifier Type Temperature Grade Terminal Form No. of Terminals Package Code Package Shape Total Dose (V) Package Body Material Nominal Unity Gain Bandwidth Maximum Negative Supply Voltage Limit Maximum Input Offset Voltage Maximum Average Bias Current (IIB) Surface Mount No. of Functions Minimum Common Mode Reject Ratio Technology Screening Level Nominal Common Mode Reject Ratio Maximum Supply Current Nominal Negative Supply Voltage (Vsup) Minimum Isolation Voltage Packing Method Nominal Supply Voltage / Vsup (V) Power Supplies (V) Package Style (Meter) Package Equivalence Code Sub-Category Nominal Slow Rate Maximum Supply Voltage Limit Terminal Pitch Maximum Operating Temperature Maximum Bias Current (IIB) @25C Maximum Common Mode Voltage Nominal Response Time Output Type Minimum Operating Temperature Terminal Finish Terminal Position JESD-30 Code Moisture Sensitivity Level (MSL) Maximum Seated Height Width Qualification Nominal Bandwidth (3dB) JESD-609 Code Maximum Time At Peak Reflow Temperature (s) Peak Reflow Temperature (C) Length

LT1671CS8#TRPBF

Analog Devices

Comparator

Commercial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-7 V

4 mV

350 nA

Yes

1

-5 V

Tape And Reel

5 V

Small Outline

Comparators

7 V

0.05 in (1.27 mm)

70 °C (158 °F)

85 ns

0 °C (32 °F)

Matte Tin

Dual

R-PDSO-G8

1

0.069 in (1.752 mm)

0.154 in (3.899 mm)

No

e3

30 s

260 °C (500 °F)

0.193 in (4.9025 mm)

LT1721CGN#TR

Analog Devices

Comparator

Commercial

Gull Wing

16

SSOP

Rectangular

Plastic/Epoxy

4.5 mV

-6 uA

Yes

4

BIPOLAR

Tape And Reel

5 V

Small Outline, Shrink Pitch

Comparators

7 V

0.025 in (0.635 mm)

70 °C (158 °F)

7 ns

Push-Pull

0 °C (32 °F)

Tin Lead

Dual

R-PDSO-G16

1

0.069 in (1.75 mm)

0.154 in (3.9116 mm)

No

e0

0.193 in (4.9 mm)

LTC1843CS8#TRPBF

Analog Devices

Comparator

Commercial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

10 mV

Yes

2

CMOS

Tape And Reel

3 V

Small Outline

Comparators

0.05 in (1.27 mm)

70 °C (158 °F)

5 µs

Open-Drain

0 °C (32 °F)

Matte Tin

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e3

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

LM319N#PBF

Analog Devices

Comparator

Commercial

Through-Hole

14

DIP

Rectangular

Plastic/Epoxy

-18 V

8 mV

1 uA

No

2

-15 V

15 V

In-Line

Comparators

18 V

70 °C (158 °F)

80 ns

0 °C (32 °F)

Matte Tin

Dual

R-PDIP-T14

No

e3

LTC1843CS8#TR

Analog Devices

Comparator

Commercial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

10 mV

Yes

2

CMOS

Tape And Reel

3 V

Small Outline

Comparators

0.05 in (1.27 mm)

70 °C (158 °F)

5 µs

Open-Drain

0 °C (32 °F)

Tin/Lead

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e0

0.193 in (4.9 mm)

5962-01-266-9513

Analog Devices

Comparator

Commercial

Through-Hole

8

DIP

Rectangular

Ceramic

2.4 mV

No

BIPOLAR

8 mA

5/±15 V

In-Line

DIP8,.3

Comparators

0.1 in (2.54 mm)

70 °C (158 °F)

600 nA

160 ns

0 °C (32 °F)

Dual

R-XDIP-T8

No

LTC1442CS8#TR

Analog Devices

Comparator

Commercial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-0.3 V

10 mV

Yes

2

CMOS

0 V

Tape And Reel

3 V

Small Outline

Comparators

12 V

0.05 in (1.27 mm)

70 °C (158 °F)

14 µs

0 °C (32 °F)

Tin Lead

Dual

R-PDSO-G8

1

0.069 in (1.752 mm)

0.154 in (3.899 mm)

No

e0

0.193 in (4.9025 mm)

LTC1444CDHD#PBF

Analog Devices

Comparator

Commercial

No Lead

16

HVSON

Rectangular

Plastic/Epoxy

-0.3 V

10 mV

Yes

4

0 V

3 V

Small Outline, Heat Sink/Slug, Very Thin Profile

Comparators

12 V

0.02 in (0.5 mm)

70 °C (158 °F)

14 µs

Open-Drain

0 °C (32 °F)

Matte Tin

Dual

R-PDSO-N16

1

0.031 in (0.8 mm)

0.157 in (4 mm)

No

e3

30 s

260 °C (500 °F)

0.197 in (5 mm)

LT6700CDCB-3#TR

Analog Devices

Comparator

Commercial

No Lead

6

HVSON

Rectangular

Plastic/Epoxy

15 nA

Yes

2

Tape And Reel

5 V

Small Outline, Heat Sink/Slug, Very Thin Profile

Comparators

18.5 V

0.02 in (0.5 mm)

70 °C (158 °F)

29 µs

Open-Collector

0 °C (32 °F)

Tin/Lead

Dual

R-PDSO-N6

1

0.031 in (0.8 mm)

0.079 in (2 mm)

No

e0

0.118 in (3 mm)

LT6700CS6-2

Analog Devices

Comparator

Commercial

Gull Wing

6

VSSOP

Rectangular

Plastic/Epoxy

15 nA

Yes

2

5 V

Small Outline, Very Thin Profile, Shrink Pitch

Comparators

18.5 V

0.037 in (0.95 mm)

70 °C (158 °F)

29 µs

Open-Collector

0 °C (32 °F)

Tin Lead

Dual

R-PDSO-G6

0.039 in (1 mm)

0.064 in (1.625 mm)

No

e0

0.114 in (2.9 mm)

AD790JR

Analog Devices

Comparator

Commercial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-18 V

1.5 mV

6.5 uA

Yes

1

BIPOLAR

-15 V

15 V

5,5/±15 V

Small Outline

SOP8,.25

Comparators

18 V

0.05 in (1.27 mm)

70 °C (158 °F)

5 uA

45 ns

Push-Pull

0 °C (32 °F)

Tin Lead

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e0

30 s

240 °C (464 °F)

0.193 in (4.9 mm)

LTC1440CDD#TR

Analog Devices

Comparator

Commercial

No Lead

8

HVSON

Square

Plastic/Epoxy

-0.3 V

10 mV

Yes

1

CMOS

0 V

Tape And Reel

3 V

Small Outline, Heat Sink/Slug, Very Thin Profile

Comparators

12 V

0.02 in (0.5 mm)

70 °C (158 °F)

14 µs

0 °C (32 °F)

Tin/Lead

Dual

S-PDSO-N8

1

0.031 in (0.8 mm)

0.118 in (3 mm)

No

e0

0.118 in (3 mm)

LT311AJ8

Analog Devices

Comparator

Commercial

Through-Hole

8

DIP

Rectangular

Ceramic

-18 V

2 mV

150 nA

No

1

BIPOLAR

4 mA

-15 V

15 V

In-Line

DIP8,.3

Comparators

18 V

0.1 in (2.54 mm)

70 °C (158 °F)

100 nA

200 ns

Open-Collector

0 °C (32 °F)

Dual

R-CDIP-T8

0.2 in (5.08 mm)

0.3 in (7.62 mm)

0.405 in (10.287 mm)

LTC1444CN#TRPBF

Analog Devices

Comparator

Commercial

Through-Hole

16

DIP

Rectangular

Plastic/Epoxy

-0.3 V

10 mV

No

4

0 V

Tape And Reel

3 V

In-Line

Comparators

12 V

0.1 in (2.54 mm)

70 °C (158 °F)

5 µs

0 °C (32 °F)

Matte Tin - annealed

Dual

R-PDIP-T16

0.155 in (3.937 mm)

0.3 in (7.62 mm)

No

e3

LT6700HVCS6-2#PBF

Analog Devices

Comparator

Commercial

Gull Wing

6

VSSOP

Rectangular

Plastic/Epoxy

15 nA

Yes

2

5 V

Small Outline, Very Thin Profile, Shrink Pitch

Comparators

18.5 V

0.037 in (0.95 mm)

70 °C (158 °F)

29 µs

Open-Collector

0 °C (32 °F)

Matte Tin - annealed

Dual

R-PDSO-G6

1

0.039 in (1 mm)

0.064 in (1.625 mm)

e3

30 s

260 °C (500 °F)

0.114 in (2.9 mm)

LTC1443CS

Analog Devices

Comparator

Commercial

Gull Wing

16

SOP

Rectangular

Plastic/Epoxy

-0.3 V

10 mV

Yes

4

CMOS

0 V

3 V

Small Outline

Comparators

12 V

0.05 in (1.27 mm)

70 °C (158 °F)

14 µs

0 °C (32 °F)

Tin Lead

Dual

R-PDSO-G16

1

0.069 in (1.752 mm)

0.154 in (3.899 mm)

No

e0

0.39 in (9.906 mm)

LTC1444CS#TRPBF

Analog Devices

Comparator

Commercial

Gull Wing

16

SOP

Rectangular

Plastic/Epoxy

-0.3 V

10 mV

Yes

4

0 V

Tape And Reel

3 V

Small Outline

Comparators

12 V

0.05 in (1.27 mm)

70 °C (158 °F)

14 µs

Open-Drain

0 °C (32 °F)

Matte Tin

Dual

R-PDSO-G16

1

0.069 in (1.752 mm)

0.154 in (3.899 mm)

No

e3

30 s

260 °C (500 °F)

0.39 in (9.906 mm)

LT6700CDCB-1#TRMPBF

Analog Devices

Comparator

Commercial

No Lead

6

HVSON

Rectangular

Plastic/Epoxy

15 nA

Yes

2

Tape And Reel

5 V

Small Outline, Heat Sink/Slug, Very Thin Profile

Comparators

18.5 V

0.02 in (0.5 mm)

70 °C (158 °F)

29 µs

Open-Collector

0 °C (32 °F)

Matte Tin

Dual

R-PDSO-N6

1

0.031 in (0.8 mm)

0.079 in (2 mm)

No

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

LTC1440CDD#PBF

Analog Devices

Comparator

Commercial

No Lead

8

HVSON

Square

Plastic/Epoxy

-0.3 V

10 mV

Yes

1

CMOS

0 V

3 V

Small Outline, Heat Sink/Slug, Very Thin Profile

Comparators

12 V

0.02 in (0.5 mm)

70 °C (158 °F)

14 µs

0 °C (32 °F)

Matte Tin

Dual

S-PDSO-N8

1

0.031 in (0.8 mm)

0.118 in (3 mm)

No

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

LTC1442CN8#PBF

Analog Devices

Comparator

Commercial

Through-Hole

8

DIP

Rectangular

Plastic/Epoxy

-0.3 V

10 mV

No

2

CMOS

0 V

3 V

In-Line

Comparators

12 V

0.1 in (2.54 mm)

70 °C (158 °F)

14 µs

0 °C (32 °F)

Matte Tin

Dual

R-PDIP-T8

1

0.15 in (3.809 mm)

0.3 in (7.62 mm)

No

e3

30 s

260 °C (500 °F)

LT6700CS6-1#TRM

Analog Devices

Comparator

Commercial

Gull Wing

6

VSSOP

Rectangular

Plastic/Epoxy

15 nA

Yes

2

Tape And Reel

5 V

Small Outline, Very Thin Profile, Shrink Pitch

Comparators

18.5 V

0.037 in (0.95 mm)

70 °C (158 °F)

29 µs

Open-Collector

0 °C (32 °F)

Tin/Lead

Dual

R-PDSO-G6

1

0.039 in (1 mm)

0.064 in (1.625 mm)

No

e0

0.114 in (2.9 mm)

LT1394CMS8

Analog Devices

Comparator

Commercial

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

-7 V

4 mV

7 uA

Yes

1

-5 V

5 V

Small Outline, Thin Profile, Shrink Pitch

Comparators

7 V

0.026 in (0.65 mm)

70 °C (158 °F)

7 ns

0 °C (32 °F)

Tin Lead

Dual

S-PDSO-G8

1

0.046 in (1.17 mm)

0.118 in (3 mm)

No

e0

0.118 in (3 mm)

LT1116CN8

Analog Devices

Comparator

Commercial

Through-Hole

8

DIP

Rectangular

Plastic/Epoxy

-7 V

3.5 mV

20 uA

No

1

BIPOLAR

-5 V

5 V

In-Line

Comparators

7 V

0.1 in (2.54 mm)

70 °C (158 °F)

12 ns

0 °C (32 °F)

Tin Lead

Dual

R-PDIP-T8

1

0.155 in (3.937 mm)

0.3 in (7.62 mm)

No

e0

LT1720CDD#TR

Analog Devices

Comparator

Commercial

No Lead

8

VSON

Square

Plastic/Epoxy

4.5 mV

-6 uA

Yes

2

BIPOLAR

Tape And Reel

5 V

Small Outline, Very Think Profile

Comparators

7 V

0.02 in (0.5 mm)

70 °C (158 °F)

7 ns

Push-Pull

0 °C (32 °F)

Tin Lead

Dual

S-PDSO-N8

1

0.033 in (0.85 mm)

0.118 in (3 mm)

No

e0

0.118 in (3 mm)

LT1711CMS8#TR

Analog Devices

Comparator

Commercial

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

-6.3 V

6 mV

10 uA

Yes

1

-5 V

Tape And Reel

5 V

Small Outline, Thin Profile, Shrink Pitch

Comparators

6.3 V

0.026 in (0.65 mm)

70 °C (158 °F)

5.5 ns

0 °C (32 °F)

Tin Lead

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e0

0.118 in (3 mm)

LT1394CMS8#TR

Analog Devices

Comparator

Commercial

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

-7 V

4 mV

7 uA

Yes

1

-5 V

Tape And Reel

5 V

Small Outline, Thin Profile, Shrink Pitch

Comparators

7 V

0.026 in (0.65 mm)

70 °C (158 °F)

7 ns

0 °C (32 °F)

Tin Lead

Dual

S-PDSO-G8

1

0.046 in (1.17 mm)

0.118 in (3 mm)

No

e0

0.118 in (3 mm)

LT1018CS8

Analog Devices

Comparator

Commercial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-20 V

1.4 mV

100 nA

Yes

2

0 V

4.5 V

Small Outline

Comparators

40 V

0.05 in (1.27 mm)

70 °C (158 °F)

Open-Collector

0 °C (32 °F)

Tin Lead

Dual

R-PDSO-G8

1

0.069 in (1.752 mm)

0.154 in (3.899 mm)

No

e0

0.193 in (4.9025 mm)

LTC1841CS8#TR

Analog Devices

Comparator

Commercial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

10 mV

Yes

2

CMOS

5.7 μA

Tape And Reel

3 V

Small Outline

Comparators

12 V

0.05 in (1.27 mm)

70 °C (158 °F)

5 µs

Open-Drain

0 °C (32 °F)

Tin/Lead

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e0

0.193 in (4.9 mm)

LTC1445CDHD#TRPBF

Analog Devices

Comparator

Commercial

No Lead

16

HVSON

Rectangular

Plastic/Epoxy

-0.3 V

10 mV

Yes

4

0 V

Tape And Reel

3 V

Small Outline, Heat Sink/Slug, Very Thin Profile

Comparators

12 V

0.02 in (0.5 mm)

70 °C (158 °F)

14 µs

0 °C (32 °F)

Matte Tin

Dual

R-PDSO-N16

1

0.031 in (0.8 mm)

0.157 in (4 mm)

No

e3

30 s

260 °C (500 °F)

0.197 in (5 mm)

LT1011CN8

Analog Devices

Comparator

Commercial

Through-Hole

8

DIP

Rectangular

Plastic/Epoxy

-18 V

3 mV

50 nA

No

1

BIPOLAR

-15 V

15 V

In-Line

Comparators

18 V

0.1 in (2.54 mm)

70 °C (158 °F)

150 ns

0 °C (32 °F)

Tin Lead

Dual

R-PDIP-T8

1

0.155 in (3.937 mm)

0.3 in (7.62 mm)

No

e0

LT6700CDCB-3#TRPBF

Analog Devices

Comparator

Commercial

No Lead

6

HVSON

Rectangular

Plastic/Epoxy

15 nA

Yes

2

Tape And Reel

5 V

Small Outline, Heat Sink/Slug, Very Thin Profile

Comparators

18.5 V

0.02 in (0.5 mm)

70 °C (158 °F)

29 µs

Open-Collector

0 °C (32 °F)

Matte Tin

Dual

R-PDSO-N6

1

0.031 in (0.8 mm)

0.079 in (2 mm)

No

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

LTC1445CDHD#TR

Analog Devices

Comparator

Commercial

No Lead

16

HVSON

Rectangular

Plastic/Epoxy

-0.3 V

10 mV

Yes

4

0 V

Tape And Reel

3 V

Small Outline, Heat Sink/Slug, Very Thin Profile

Comparators

12 V

0.02 in (0.5 mm)

70 °C (158 °F)

14 µs

0 °C (32 °F)

Tin Lead

Dual

R-PDSO-N16

1

0.031 in (0.8 mm)

0.157 in (4 mm)

No

e0

0.197 in (5 mm)

LTC1841CS8#TRPBF

Analog Devices

Comparator

Commercial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

10 mV

Yes

2

CMOS

5.7 μA

Tape And Reel

3 V

Small Outline

Comparators

12 V

0.05 in (1.27 mm)

70 °C (158 °F)

5 µs

Open-Drain

0 °C (32 °F)

Matte Tin

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e3

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

LT6700CS6-2#TR

Analog Devices

Comparator

Commercial

Gull Wing

6

VSSOP

Rectangular

Plastic/Epoxy

15 nA

Yes

2

Tape And Reel

5 V

Small Outline, Very Thin Profile, Shrink Pitch

Comparators

18.5 V

0.037 in (0.95 mm)

70 °C (158 °F)

29 µs

Open-Collector

0 °C (32 °F)

Tin/Lead

Dual

R-PDSO-G6

1

0.039 in (1 mm)

0.064 in (1.625 mm)

No

e0

0.114 in (2.9 mm)

LT1394CS8

Analog Devices

Comparator

Commercial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-7 V

4 mV

7 uA

Yes

1

-5 V

5 V

Small Outline

Comparators

7 V

0.05 in (1.27 mm)

70 °C (158 °F)

7 ns

0 °C (32 °F)

Tin Lead

Dual

R-PDSO-G8

1

0.069 in (1.752 mm)

0.154 in (3.9 mm)

No

e0

0.193 in (4.9025 mm)

LT1394CS8#TRPBF

Analog Devices

Comparator

Commercial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-7 V

4 mV

7 uA

Yes

1

-5 V

Tape And Reel

5 V

Small Outline

Comparators

7 V

0.05 in (1.27 mm)

70 °C (158 °F)

7 ns

0 °C (32 °F)

Matte Tin

Dual

R-PDSO-G8

1

0.069 in (1.752 mm)

0.154 in (3.9 mm)

No

e3

30 s

260 °C (500 °F)

0.193 in (4.9025 mm)

LT6700HVCS6-3#PBF

Analog Devices

Comparator

Commercial

Gull Wing

6

VSSOP

Rectangular

Plastic/Epoxy

15 nA

Yes

2

5 V

Small Outline, Very Thin Profile, Shrink Pitch

Comparators

18.5 V

0.037 in (0.95 mm)

70 °C (158 °F)

29 µs

Open-Collector

0 °C (32 °F)

Matte Tin - annealed

Dual

R-PDSO-G6

1

0.039 in (1 mm)

0.064 in (1.625 mm)

e3

30 s

260 °C (500 °F)

0.114 in (2.9 mm)

LT1011CS8

Analog Devices

Comparator

Commercial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-18 V

3 mV

50 nA

Yes

1

BIPOLAR

-15 V

15 V

Small Outline

Comparators

18 V

0.05 in (1.27 mm)

70 °C (158 °F)

150 ns

Open-Collector

0 °C (32 °F)

Tin Lead

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e0

0.193 in (4.9 mm)

LT6700CDCB-2#TRPBF

Analog Devices

Comparator

Commercial

No Lead

6

HVSON

Rectangular

Plastic/Epoxy

15 nA

Yes

2

Tape And Reel

5 V

Small Outline, Heat Sink/Slug, Very Thin Profile

Comparators

18.5 V

0.02 in (0.5 mm)

70 °C (158 °F)

29 µs

Open-Collector

0 °C (32 °F)

Matte Tin

Dual

R-PDSO-N6

1

0.031 in (0.8 mm)

0.079 in (2 mm)

No

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

AD96687CHIPS

Analog Devices

Comparator

Commercial

3 mV

BIPOLAR

36 mA

5,-5.2 V

DIE OR CHIP

Comparators

70 °C (158 °F)

10 uA

2.5 ns

0 °C (32 °F)

No

5962-01-430-9147

Analog Devices

Comparator

Commercial

Wire

10

Round

Metal

3 mV

BIPOLAR

32 mA

5,GND/-5.2 V

Cylindrical

CAN10,.23

Comparators

70 °C (158 °F)

55 uA

4.5 ns

0 °C (32 °F)

Bottom

O-MBCY-W10

No

ADCMP572JCP

Analog Devices

Comparator

Commercial

No Lead

16

HVQCCN

Square

5 mV

-50 uA

Yes

1

BIPOLAR

52 mA

3.3 V

3.3/5 V

Chip Carrier, Heat Sink/Slug, Very Thin Profile

LCC16,.12SQ,20

Comparators

6 V

0.02 in (0.5 mm)

70 °C (158 °F)

0 °C (32 °F)

Tin Lead Over Silver

Quad

S-XQCC-N16

3

0.039 in (1 mm)

0.118 in (3 mm)

No

e0

240 °C (464 °F)

0.118 in (3 mm)

LT1018CN8

Analog Devices

Comparator

Commercial

Through-Hole

8

DIP

Rectangular

Plastic/Epoxy

-20 V

1.4 mV

100 nA

No

2

0 V

4.5 V

In-Line

Comparators

40 V

0.1 in (2.54 mm)

70 °C (158 °F)

Open-Collector

0 °C (32 °F)

Tin Lead

Dual

R-PDIP-T8

1

0.155 in (3.937 mm)

0.3 in (7.62 mm)

No

e0

LTC1540CS8#PBF

Analog Devices

Comparator

Commercial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

0 V

15 mV

Yes

1

0 V

3 V

Small Outline

Comparators

12 V

0.05 in (1.27 mm)

70 °C (158 °F)

70 µs

0 °C (32 °F)

Matte Tin

Dual

R-PDSO-G8

1

0.069 in (1.752 mm)

0.154 in (3.899 mm)

No

e3

30 s

260 °C (500 °F)

0.193 in (4.9025 mm)

LTC1841CS8#PBF

Analog Devices

Comparator

Commercial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

10 mV

Yes

2

CMOS

5.7 μA

3 V

Small Outline

Comparators

12 V

0.05 in (1.27 mm)

70 °C (158 °F)

5 µs

Open-Drain

0 °C (32 °F)

Matte Tin

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e3

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

CMP01CJ

Analog Devices

Comparator

Commercial

Wire

8

TO-99

Round

Metal

-18 V

3.5 mV

900 nA

No

1

BIPOLAR

8.5 mA

-15 V

15 V

5/±15 V

Cylindrical

CAN8,.2

Comparators

18 V

70 °C (158 °F)

900 nA

110 ns

Totem Pole

0 °C (32 °F)

Tin Lead

Bottom

O-MBCY-W8

No

e0

LT1011CS8#TR

Analog Devices

Comparator

Commercial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-18 V

3 mV

50 nA

Yes

1

BIPOLAR

-15 V

Tape And Reel

15 V

Small Outline

Comparators

18 V

0.05 in (1.27 mm)

70 °C (158 °F)

150 ns

Open-Collector

0 °C (32 °F)

Tin Lead

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e0

0.193 in (4.9 mm)

LTC1440CN8#TR

Analog Devices

Comparator

Commercial

Through-Hole

8

DIP

Rectangular

Plastic/Epoxy

-0.3 V

10 mV

No

1

CMOS

0 V

Tape And Reel

3 V

In-Line

Comparators

12 V

0.1 in (2.54 mm)

70 °C (158 °F)

5 µs

0 °C (32 °F)

Tin/Lead

Dual

R-PDIP-T8

1

0.15 in (3.809 mm)

0.3 in (7.62 mm)

No

e0

Comparators

Comparators are electronic circuits that compare two input voltages and output a voltage signal that indicates which of the inputs is larger. A comparator is similar to an operational amplifier (op-amp), but it is designed to operate with a limited range of voltage outputs (typically near the power supply rails) and with very high gain.

A comparator typically has two input terminals, a non-inverting (+) input and an inverting (-) input, and one output. When the voltage at the non-inverting input is greater than the voltage at the inverting input, the output of the comparator switches to its maximum positive voltage. Conversely, when the voltage at the inverting input is greater than the voltage at the non-inverting input, the output of the comparator switches to its maximum negative voltage.

Comparators are often used in applications where a precise measurement or detection of voltage level is required, such as in voltage reference circuits, level detectors, and waveform generators. They can also be used to implement digital logic circuits and are frequently used in A/D converters and motor control circuits.

It is worth noting that a comparator output can switch quickly between its high and low states, so they can be sensitive to noise and require careful circuit design to ensure proper operation. In addition, some comparators may include features such as hysteresis, which can help to reduce noise and ensure stable operation in the presence of small fluctuations in the input signals.