Commercial Comparators 1,788

Reset All

Part	Manufacturer	Amplifier Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Maximum Negative Supply Voltage Limit	Maximum Input Offset Voltage	Maximum Average Bias Current (IIB)	Surface Mount	No. of Functions	Technology	Maximum Supply Current	Nominal Negative Supply Voltage (Vsup)	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Sub-Category	Maximum Supply Voltage Limit	Terminal Pitch	Maximum Operating Temperature	Maximum Bias Current (IIB) @25C	Nominal Response Time	Output Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length
AP393FEG-7	Diodes Incorporated	Comparator	Commercial	No Lead	8	VSON	Rectangular	Plastic/Epoxy	-18 V	12 mV	400 nA	Yes	2				5 V		Small Outline, Very Think Profile		Comparators	18 V	0.02 in (0.5 mm)	70 °C (158 °F)		300 ns		0 °C (32 °F)	Matte Tin	Dual	R-PDSO-N8		0.024 in (0.605 mm)	0.063 in (1.6 mm)	No	e3			0.083 in (2.1 mm)
AP393SM-13	Diodes Incorporated	Comparator	Commercial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	-18 V	12 mV	400 nA	Yes	2				5 V		Small Outline		Comparators	18 V	0.05 in (1.27 mm)	70 °C (158 °F)		300 ns		0 °C (32 °F)	Matte Tin	Dual	R-PDSO-G8		0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e3		260 °C (500 °F)	0.193 in (4.9 mm)
AP393SG-13	Diodes Incorporated	Comparator	Commercial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy		9 mV	400 nA	Yes	2	CMOS	2.5 mA		5 V	±1/±18/2/36 V	Small Outline	SOP8,.25	Comparators	36 V	0.05 in (1.27 mm)	70 °C (158 °F)	250 nA	1.3 µs	Open-Collector	0 °C (32 °F)	Matte Tin	Dual	R-PDSO-G8	3	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e3	40	260 °C (500 °F)	0.193 in (4.9 mm)
AP393ASG-13	Diodes Incorporated	Comparator	Commercial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy		9 mV	500 nA	Yes	2	BIPOLAR	2.5 mA		5 V	±1/±18/2/36 V	Small Outline	SOP8,.25	Comparators	40 V	0.05 in (1.27 mm)	70 °C (158 °F)	400 nA	1.3 µs	Open-Collector	0 °C (32 °F)	Matte Tin	Dual	R-PDSO-G8	3	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e3		260 °C (500 °F)	0.193 in (4.9 mm)
AP393S	Diodes Incorporated	Comparator	Commercial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	0 V	5 mV	250 nA	Yes	2	BIPOLAR	2.5 mA	0 V	5 V	5 V	Small Outline	SOP8,.25	Comparators	36 V	0.05 in (1.27 mm)	70 °C (158 °F)	250 nA	1.3 µs	Open-Collector	0 °C (32 °F)	Matte Tin	Dual	R-PDSO-G8	3	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e3		260 °C (500 °F)	0.199 in (5.05 mm)
AP393N	Diodes Incorporated	Comparator	Commercial	Through-Hole	8	DIP	Rectangular	Plastic/Epoxy	0 V	5 mV	250 nA	No	2	BIPOLAR	2.5 mA	0 V	5 V	5 V	In-Line	DIP8,.3	Comparators	36 V	0.1 in (2.54 mm)	70 °C (158 °F)	250 nA	1.3 µs	Open-Collector	0 °C (32 °F)	Matte Tin	Dual	R-PDIP-T8		0.21 in (5.33 mm)	0.3 in (7.62 mm)	No	e3		260 °C (500 °F)	0.365 in (9.27 mm)
AP393SL-13	Diodes Incorporated	Comparator	Commercial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy		9 mV	400 nA	Yes	2	CMOS	2.5 mA		5 V	±1/±18/2/36 V	Small Outline	SOP8,.25	Comparators	36 V	0.05 in (1.27 mm)	70 °C (158 °F)	250 nA	1.3 µs	Open-Collector	0 °C (32 °F)	Matte Tin	Dual	R-PDSO-G8	3	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e3		260 °C (500 °F)	0.193 in (4.9 mm)
AP393SL-U	Diodes Incorporated	Comparator	Commercial	Gull Wing	8	LSOP	Rectangular	Plastic/Epoxy		5 mV	250 nA	Yes	1	CMOS	2.5 mA		5 V	5 V	Small Outline, Low Profile	SOP8,.25	Comparators	36 V	0.05 in (1.27 mm)	70 °C (158 °F)	250 nA	1.3 µs	Open-Collector	0 °C (32 °F)	Matte Tin	Dual	R-PDSO-G8	3	0.059 in (1.5 mm)	0.154 in (3.9 mm)	No	e3		260 °C (500 °F)	0.193 in (4.9 mm)
AP393AM8G-13	Diodes Incorporated	Comparator	Commercial	Gull Wing	8	TSSOP	Square	Plastic/Epoxy		9 mV	500 nA	Yes	2	BIPOLAR	2.5 mA		5 V	±1/±18/2/36 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.19	Comparators	40 V	0.026 in (0.65 mm)	70 °C (158 °F)	400 nA	1.3 µs	Open-Collector	0 °C (32 °F)	Matte Tin	Dual	S-PDSO-G8	1	0.043 in (1.1 mm)	0.118 in (3 mm)	No	e3	30 s	260 °C (500 °F)	0.118 in (3 mm)
AP393FE-13	Diodes Incorporated	Comparator	Commercial	No Lead	8	VSON	Rectangular	Plastic/Epoxy	-18 V	12 mV	400 nA	Yes	2				5 V		Small Outline, Very Think Profile		Comparators	18 V	0.02 in (0.5 mm)	70 °C (158 °F)		300 ns		0 °C (32 °F)	Matte Tin	Dual	R-PDSO-N8		0.024 in (0.605 mm)	0.063 in (1.6 mm)	No	e3		260 °C (500 °F)	0.083 in (2.1 mm)
AP393SM-7	Diodes Incorporated	Comparator	Commercial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	-18 V	12 mV	400 nA	Yes	2				5 V		Small Outline		Comparators	18 V	0.05 in (1.27 mm)	70 °C (158 °F)		300 ns		0 °C (32 °F)	Matte Tin	Dual	R-PDSO-G8		0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e3		260 °C (500 °F)	0.193 in (4.9 mm)
AP393NG-U	Diodes Incorporated	Comparator	Commercial	Through-Hole	8	DIP	Rectangular	Plastic/Epoxy		5 mV	250 nA	No	1	CMOS	2.5 mA		5 V	5 V	In-Line	DIP8,.3	Comparators	36 V	0.1 in (2.54 mm)	70 °C (158 °F)	250 nA	1.3 µs	Open-Collector	0 °C (32 °F)	Matte Tin	Dual	R-PDIP-T8	1	0.21 in (5.33 mm)	0.3 in (7.62 mm)	No	e3		260 °C (500 °F)	0.365 in (9.275 mm)
AP393SMG-13	Diodes Incorporated	Comparator	Commercial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	-18 V	12 mV	400 nA	Yes	2				5 V		Small Outline		Comparators	18 V	0.05 in (1.27 mm)	70 °C (158 °F)		300 ns		0 °C (32 °F)	Matte Tin	Dual	R-PDSO-G8		0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e3			0.193 in (4.9 mm)
AP393FEG-13	Diodes Incorporated	Comparator	Commercial	No Lead	8	VSON	Rectangular	Plastic/Epoxy	-18 V	12 mV	400 nA	Yes	2				5 V		Small Outline, Very Think Profile		Comparators	18 V	0.02 in (0.5 mm)	70 °C (158 °F)		300 ns		0 °C (32 °F)	Matte Tin	Dual	R-PDSO-N8		0.024 in (0.605 mm)	0.063 in (1.6 mm)	No	e3			0.083 in (2.1 mm)
AP393FE	Diodes Incorporated	Comparator	Commercial	No Lead	8	VSON	Rectangular	Plastic/Epoxy	-18 V	12 mV	400 nA	Yes	2				5 V		Small Outline, Very Think Profile		Comparators	18 V	0.02 in (0.5 mm)	70 °C (158 °F)		300 ns		0 °C (32 °F)	Matte Tin	Dual	R-PDSO-N8		0.024 in (0.605 mm)	0.063 in (1.6 mm)	No	e3		260 °C (500 °F)	0.083 in (2.1 mm)
AP393AM8G-U	Diodes Incorporated	Comparator	Commercial	Gull Wing	8	TSSOP	Square	Plastic/Epoxy		8 mV	300 nA	Yes	2	BIPOLAR	2.5 mA		5 V	±1/±18/2/36 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.19	Comparators	40 V	0.026 in (0.65 mm)	70 °C (158 °F)	300 nA	300 ns	Open-Collector	0 °C (32 °F)	Matte Tin	Dual	S-PDSO-G8		0.043 in (1.1 mm)	0.118 in (3 mm)	No	e3	40	260 °C (500 °F)	0.118 in (3 mm)
AP393SMG-7	Diodes Incorporated	Comparator	Commercial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	-18 V	12 mV	400 nA	Yes	2				5 V		Small Outline		Comparators	18 V	0.05 in (1.27 mm)	70 °C (158 °F)		300 ns		0 °C (32 °F)	Matte Tin	Dual	R-PDSO-G8		0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e3			0.193 in (4.9 mm)
AP393NL-U	Diodes Incorporated	Comparator	Commercial	Through-Hole	8	DIP	Rectangular	Plastic/Epoxy		9 mV	400 nA	No	2	CMOS	2.5 mA		5 V	±1/±18/2/36 V	In-Line	DIP8,.3	Comparators	36 V	0.1 in (2.54 mm)	70 °C (158 °F)	250 nA	1.3 µs	Open-Collector	0 °C (32 °F)	Matte Tin	Dual	R-PDIP-T8	1	0.21 in (5.33 mm)	0.3 in (7.62 mm)	No	e3		260 °C (500 °F)	0.365 in (9.275 mm)
AP393SMG	Diodes Incorporated	Comparator	Commercial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	-18 V	12 mV	400 nA	Yes	2				5 V		Small Outline		Comparators	18 V	0.05 in (1.27 mm)	70 °C (158 °F)		300 ns		0 °C (32 °F)	Matte Tin	Dual	R-PDSO-G8		0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e3			0.193 in (4.9 mm)
AP393SM	Diodes Incorporated	Comparator	Commercial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	-18 V	12 mV	400 nA	Yes	2				5 V		Small Outline		Comparators	18 V	0.05 in (1.27 mm)	70 °C (158 °F)		300 ns		0 °C (32 °F)	Matte Tin	Dual	R-PDSO-G8		0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e3		260 °C (500 °F)	0.193 in (4.9 mm)
AP393S-U	Diodes Incorporated	Comparator	Commercial	Gull Wing	8	LSOP	Rectangular	Plastic/Epoxy		5 mV	250 nA	Yes	1	CMOS			5 V		Small Outline, Low Profile		Comparators	36 V	0.05 in (1.27 mm)	70 °C (158 °F)		1.3 µs	Open-Collector	0 °C (32 °F)		Dual	R-PDSO-G8		0.059 in (1.5 mm)	0.154 in (3.9 mm)	No				0.193 in (4.9 mm)
AP393N-U	Diodes Incorporated	Comparator	Commercial	Through-Hole	8	DIP	Rectangular	Plastic/Epoxy		5 mV	250 nA	No	1	CMOS			5 V		In-Line		Comparators	36 V	0.1 in (2.54 mm)	70 °C (158 °F)		1.3 µs	Open-Collector	0 °C (32 °F)	Tin/Lead	Dual	R-PDIP-T8		0.21 in (5.33 mm)	0.3 in (7.62 mm)	No	e0	10 s	235 °C (455 °F)	0.365 in (9.275 mm)
AP393SG-U	Diodes Incorporated	Comparator	Commercial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy		5 mV	250 nA	Yes	1	CMOS	2.5 mA		5 V	5 V	Small Outline	SOP8,.25	Comparators	36 V	0.05 in (1.27 mm)	70 °C (158 °F)	250 nA	1.3 µs	Open-Collector	0 °C (32 °F)	Matte Tin	Dual	R-PDSO-G8	3	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e3		260 °C (500 °F)	0.199 in (5.05 mm)
AP393SA	Diodes Incorporated	Comparator	Commercial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	0 V	5 mV	250 nA	Yes	2	BIPOLAR	2.5 mA	0 V	5 V	5 V	Small Outline	SOP8,.25	Comparators	36 V	0.05 in (1.27 mm)	70 °C (158 °F)	250 nA	1.3 µs	Open-Collector	0 °C (32 °F)	Matte Tin	Dual	R-PDSO-G8		0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e3			0.199 in (5.05 mm)
AP393FE-7	Diodes Incorporated	Comparator	Commercial	No Lead	8	VSON	Rectangular	Plastic/Epoxy	-18 V	12 mV	400 nA	Yes	2				5 V		Small Outline, Very Think Profile		Comparators	18 V	0.02 in (0.5 mm)	70 °C (158 °F)		300 ns		0 °C (32 °F)	Matte Tin	Dual	R-PDSO-N8		0.024 in (0.605 mm)	0.063 in (1.6 mm)	No	e3		260 °C (500 °F)	0.083 in (2.1 mm)
AP393S-13	Diodes Incorporated	Comparator	Commercial	Gull Wing	8	LSOP	Rectangular	Plastic/Epoxy		5 mV	250 nA	Yes	1	CMOS			5 V		Small Outline, Low Profile		Comparators	36 V	0.05 in (1.27 mm)	70 °C (158 °F)		1.3 µs	Open-Collector	0 °C (32 °F)		Dual	R-PDSO-G8		0.059 in (1.5 mm)	0.154 in (3.9 mm)	No				0.193 in (4.9 mm)
MAX9973GCCB+TD	Maxim Integrated	Comparator	Commercial	Gull Wing	64	HTFQFP	Square	Plastic/Epoxy	-6 V	50 mV		Yes	1	BICMOS		-4.75 V	9.75 V		Flatpack, Heat Sink/Slug, Thin Profile, Fine Pitch			11 V	0.02 in (0.5 mm)	70 °C (158 °F)		1.2 ns	Open-Collector	0 °C (32 °F)	Matte Tin	Quad	S-PQFP-G64	3	0.047 in (1.2 mm)	0.394 in (10 mm)	No	e3			0.394 in (10 mm)
MAX9967ALCCQ-TD	Maxim Integrated	Comparator	Commercial	Gull Wing	100	HTFQFP	Square	Plastic/Epoxy	-7 V	20 mV	25 uA	Yes	2	BIPOLAR		-5.25 V	9.75 V		Flatpack, Heat Sink/Slug, Thin Profile, Fine Pitch		Comparators	11.5 V	0.02 in (0.5 mm)	70 °C (158 °F)		2.2 ns	Open-Collector	0 °C (32 °F)	Tin Lead	Quad	S-PQFP-G100		0.047 in (1.2 mm)	0.551 in (14 mm)	No	e0			0.551 in (14 mm)
MAX900ACWP	Maxim Integrated	Comparator	Commercial	Gull Wing	20	SOP	Rectangular	Plastic/Epoxy	-6 V	3 mV	10 uA	Yes	4	CMOS	25 mA	-5 V	5 V	5,5/10,GND/-5 V	Small Outline	SOP20,.4	Comparators	6 V	0.05 in (1.27 mm)	70 °C (158 °F)	6 uA	10 ns		0 °C (32 °F)	Tin/Lead (Sn85Pb15)	Dual	R-PDSO-G20	1	0.104 in (2.65 mm)	0.295 in (7.5 mm)	No	e0	20 s	240 °C (464 °F)	0.504 in (12.8 mm)
MAX973CUA	Maxim Integrated	Comparator	Commercial	Gull Wing	8	SOP	Square	Plastic/Epoxy	0 V	10 mV		Yes	2		5.8 μA	0 V	3 V	±1.25/±5.5/2.5/11 V	Small Outline	TSSOP8,.19	Comparators	12 V	0.025 in (0.635 mm)	70 °C (158 °F)		300 µs	Open-Drain	0 °C (32 °F)	Tin Lead	Dual	S-PDSO-G8	1			No	e0
MAX982CSA-T	Maxim Integrated	Comparator	Commercial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	0 V	10 mV		Yes	2		5.8 μA	0 V	3 V	±1.25/±5.5/2.5/11 V	Small Outline	SOP8,.25	Comparators	12 V	0.05 in (1.27 mm)	70 °C (158 °F)		300 µs	Open-Drain	0 °C (32 °F)	Tin Lead	Dual	R-PDSO-G8				No	e0
MAX922CUA-T	Maxim Integrated	Comparator	Commercial	Gull Wing	8	TSSOP	Square	Plastic/Epoxy	-0.3 V	10 mV		Yes	2	CMOS	4 μA		3 V	±1.25/±5.5/2.5/11 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.19	Comparators	12 V	0.026 in (0.65 mm)	70 °C (158 °F)		14 µs		0 °C (32 °F)	Tin Lead	Dual	S-PDSO-G8	1	0.043 in (1.1 mm)	0.118 in (3 mm)	No	e0			0.118 in (3 mm)
MAX9961BLCCQ-D	Maxim Integrated	Comparator	Commercial	Gull Wing	100	HTFQFP	Square	Plastic/Epoxy	-7 V	100 mV	25 uA	Yes	2	BIPOLAR		-5.25 V	9.75 V		Flatpack, Heat Sink/Slug, Thin Profile, Fine Pitch			11.5 V	0.02 in (0.5 mm)	70 °C (158 °F)		2.2 ns	Open-Collector	0 °C (32 °F)	Tin Lead	Quad	S-PQFP-G100	3	0.047 in (1.2 mm)	0.551 in (14 mm)	No	e0			0.551 in (14 mm)
MAX9687CSE	Maxim Integrated	Comparator	Commercial	Gull Wing	16	SOP	Rectangular	Plastic/Epoxy	-6 V	7 mV	30 uA	Yes	2	BIPOLAR		-5 V	5 V	5,-5.2 V	Small Outline	SOP16,.25	Comparators	6 V	0.05 in (1.27 mm)	70 °C (158 °F)	20 uA		Open-Emitter	0 °C (32 °F)	Tin Lead	Dual	R-PDSO-G16	1			No	e0
MAX9685CTW	Maxim Integrated	Comparator	Commercial	Wire	10		Round	Metal	-6 V	7 mV	30 uA	No	1	ECL	36 mA	-5.2 V	5 V	5,-5.2 V	Cylindrical	CAN10,.23	Comparators	6 V		70 °C (158 °F)	20 uA	1.5 ns		0 °C (32 °F)	Tin Lead	Bottom	O-MBCY-W10				No	e0
MAX909CPA	Maxim Integrated	Comparator	Commercial	Through-Hole	8	DIP	Rectangular	Plastic/Epoxy	-7 V	3.5 mV	500 nA	No	1	BIPOLAR	2 mA	-5 V	5 V	5 V	In-Line	DIP8,.3	Comparators	6 V	0.1 in (2.54 mm)	70 °C (158 °F)	300 nA	45 ns		0 °C (32 °F)	Tin Lead	Dual	R-PDIP-T8	1	0.18 in (4.572 mm)	0.3 in (7.62 mm)	No	e0			0.369 in (9.375 mm)
MAX9965BGCCQ+D	Maxim Integrated	Comparator	Commercial	Gull Wing	100	HTFQFP	Square	Plastic/Epoxy	-7 V	100 mV	25 uA	Yes	4	BIPOLAR		-5.25 V	9.75 V		Flatpack, Heat Sink/Slug, Thin Profile, Fine Pitch		Comparators	11.5 V	0.02 in (0.5 mm)	70 °C (158 °F)		1.2 ns	Open-Collector	0 °C (32 °F)	Matte Tin	Quad	S-PQFP-G100	3	0.047 in (1.2 mm)	0.551 in (14 mm)	No	e3			0.551 in (14 mm)
MAX9967BMCCQ+TD	Maxim Integrated	Comparator	Commercial	Gull Wing	100	HTFQFP	Square	Plastic/Epoxy	-7 V	100 mV	25 uA	Yes	2	BIPOLAR		-5.25 V	9.75 V		Flatpack, Heat Sink/Slug, Thin Profile, Fine Pitch			11.5 V	0.02 in (0.5 mm)	70 °C (158 °F)		2.2 ns	Open-Emitter	0 °C (32 °F)	Matte Tin	Quad	S-PQFP-G100		0.047 in (1.2 mm)	0.551 in (14 mm)	No	e3			0.551 in (14 mm)
MAX910CNG	Maxim Integrated	Comparator	Commercial	Through-Hole	24	DIP	Rectangular	Plastic/Epoxy	-6 V	5 mV	8 uA	No	1		30 mA	-5 V	5 V	±5 V	In-Line	DIP24,.3	Comparators	6 V	0.1 in (2.54 mm)	70 °C (158 °F)	6 uA	15 ns		0 °C (32 °F)	Tin Lead	Dual	R-PDIP-T24		0.225 in (5.72 mm)	0.3 in (7.62 mm)	No	e0
MAX906CSE	Maxim Integrated	Comparator	Commercial	Gull Wing	16	SOP	Rectangular	Plastic/Epoxy	-6 V	2.5 mV	10 uA	Yes	1		48 mA	-5 V	5 V	5/GND,-5/-5.2 V	Small Outline	SOP16,.25	Comparators	6 V	0.05 in (1.27 mm)	70 °C (158 °F)	10 uA	2 ns		0 °C (32 °F)	Tin/Lead	Dual	R-PDSO-G16	1			No	e0
MAX9965BJCCQ+D	Maxim Integrated	Comparator	Commercial	Gull Wing	100	HTFQFP	Square	Plastic/Epoxy	-7 V	100 mV	25 uA	Yes	4	BIPOLAR		-5.25 V	9.75 V		Flatpack, Heat Sink/Slug, Thin Profile, Fine Pitch		Comparators	11.5 V	0.02 in (0.5 mm)	70 °C (158 °F)		1.2 ns	Open-Emitter	0 °C (32 °F)	Matte Tin	Quad	S-PQFP-G100		0.047 in (1.2 mm)	0.551 in (14 mm)	No	e3			0.551 in (14 mm)
MAX981CPA	Maxim Integrated	Comparator	Commercial	Through-Hole	8	DIP	Rectangular	Plastic/Epoxy	0 V	10 mV		No	1		3.8 μA	0 V	3 V	±1.25/±5.5/2.5/11 V	In-Line	DIP8,.3	Comparators	12 V	0.1 in (2.54 mm)	70 °C (158 °F)		300 µs	Open-Drain	0 °C (32 °F)	Tin Lead	Dual	R-PDIP-T8	1	0.18 in (4.572 mm)		No	e0		245 °C (473 °F)	0.369 in (9.375 mm)
MAX973C/D	Maxim Integrated	Comparator	Commercial	No Lead	8	DIE	Rectangular			10 mV		Yes	2	CMOS	4.5 μA		5 V		Uncased Chip		Comparators	12 V		70 °C (158 °F)		300 µs	Open-Drain	0 °C (32 °F)	Tin Lead	Upper	R-XUUC-N8	1			No	e0
MAX9967BRCCQ-D	Maxim Integrated	Comparator	Commercial	Gull Wing	100	HTFQFP	Square	Plastic/Epoxy	-7 V	100 mV	25 uA	Yes	2	BIPOLAR		-5.25 V	9.75 V		Flatpack, Heat Sink/Slug, Thin Profile, Fine Pitch			11.5 V	0.02 in (0.5 mm)	70 °C (158 °F)		2.2 ns	Open-Collector	0 °C (32 °F)	Tin Lead	Quad	S-PQFP-G100	3	0.047 in (1.2 mm)	0.551 in (14 mm)	No	e0			0.551 in (14 mm)
MAX9961ADCCQ-TD	Maxim Integrated	Comparator	Commercial	Gull Wing	100	HTFQFP	Square	Plastic/Epoxy	-7 V	20 mV	25 uA	Yes	2	BIPOLAR		-5.25 V	9.75 V		Flatpack, Heat Sink/Slug, Thin Profile, Fine Pitch		Comparators	11.5 V	0.02 in (0.5 mm)	70 °C (158 °F)		2.2 ns	Open-Collector	0 °C (32 °F)	Tin Lead	Quad	S-PQFP-G100		0.047 in (1.2 mm)	0.551 in (14 mm)	No	e0			0.551 in (14 mm)
MAX944CPD	Maxim Integrated	Comparator	Commercial	Through-Hole	14	DIP	Rectangular	Plastic/Epoxy		3 mV	300 nA	No	4	BIPOLAR	2.4 mA		3 V	3/5 V	In-Line	DIP14,.3	Comparators	6.5 V	0.1 in (2.54 mm)	70 °C (158 °F)		80 ns	Push-Pull	0 °C (32 °F)	Tin Lead	Dual	R-PDIP-T14	1	0.18 in (4.572 mm)	0.3 in (7.62 mm)	No	e0	20 s	240 °C (464 °F)	0.75 in (19.05 mm)
MAX9966BGCCQ+D	Maxim Integrated	Comparator	Commercial	Gull Wing	100	HTFQFP	Square	Plastic/Epoxy	-7 V	100 mV	25 uA	Yes	4	BIPOLAR		-5.25 V	9.75 V		Flatpack, Heat Sink/Slug, Thin Profile, Fine Pitch		Comparators	11.5 V	0.02 in (0.5 mm)	70 °C (158 °F)		1.2 ns	Open-Collector	0 °C (32 °F)	Matte Tin	Quad	S-PQFP-G100	3	0.047 in (1.2 mm)	0.551 in (14 mm)	No	e3			0.551 in (14 mm)
MAX900BCPP+	Maxim Integrated	Comparator	Commercial	Through-Hole	20	DIP	Rectangular	Plastic/Epoxy	-6 V	6 mV	15 uA	No	4	CMOS	25 mA	-5 V	5 V	5,5/10,GND/-5 V	In-Line	DIP20,.3	Comparators	6 V	0.1 in (2.54 mm)	70 °C (158 °F)	10 uA	10 ns		0 °C (32 °F)	Matte Tin	Dual	R-PDIP-T20	1	0.18 in (4.572 mm)	0.3 in (7.62 mm)	No	e3	30 s	260 °C (500 °F)	1.03 in (26.16 mm)

Comparators

Comparators are electronic circuits that compare two input voltages and output a voltage signal that indicates which of the inputs is larger. A comparator is similar to an operational amplifier (op-amp), but it is designed to operate with a limited range of voltage outputs (typically near the power supply rails) and with very high gain.

A comparator typically has two input terminals, a non-inverting (+) input and an inverting (-) input, and one output. When the voltage at the non-inverting input is greater than the voltage at the inverting input, the output of the comparator switches to its maximum positive voltage. Conversely, when the voltage at the inverting input is greater than the voltage at the non-inverting input, the output of the comparator switches to its maximum negative voltage.

Comparators are often used in applications where a precise measurement or detection of voltage level is required, such as in voltage reference circuits, level detectors, and waveform generators. They can also be used to implement digital logic circuits and are frequently used in A/D converters and motor control circuits.

It is worth noting that a comparator output can switch quickly between its high and low states, so they can be sensitive to noise and require careful circuit design to ensure proper operation. In addition, some comparators may include features such as hysteresis, which can help to reduce noise and ensure stable operation in the presence of small fluctuations in the input signals.