Commercial Comparators 1,788

Reset All

Part	Manufacturer	Amplifier Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Maximum Negative Supply Voltage Limit	Maximum Input Offset Voltage	Maximum Average Bias Current (IIB)	Surface Mount	No. of Functions	Technology	Maximum Supply Current	Nominal Negative Supply Voltage (Vsup)	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Sub-Category	Maximum Supply Voltage Limit	Terminal Pitch	Maximum Operating Temperature	Maximum Bias Current (IIB) @25C	Nominal Response Time	Output Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length
MAX974CPE+	Maxim Integrated	Comparator	Commercial	Through-Hole	16	DIP	Rectangular	Plastic/Epoxy	0 V	10 mV		No	4		8 μA	0 V	3 V	±1.25/±5.5/2.5/11 V	In-Line	DIP16,.3	Comparators	12 V	0.1 in (2.54 mm)	70 °C (158 °F)		300 µs	Open-Drain	0 °C (32 °F)	Matte Tin	Dual	R-PDIP-T16	1	0.225 in (5.72 mm)	0.3 in (7.62 mm)	No	e3	30 s	260 °C (500 °F)
MAX9967BMCCQ-D	Maxim Integrated	Comparator	Commercial	Gull Wing	100	HTFQFP	Square	Plastic/Epoxy	-7 V	100 mV	25 uA	Yes	2	BIPOLAR		-5.25 V	9.75 V		Flatpack, Heat Sink/Slug, Thin Profile, Fine Pitch			11.5 V	0.02 in (0.5 mm)	70 °C (158 °F)		2.2 ns	Open-Emitter	0 °C (32 °F)	Tin Lead	Quad	S-PQFP-G100	3	0.047 in (1.2 mm)	0.551 in (14 mm)	No	e0			0.551 in (14 mm)
MAX984CPE+	Maxim Integrated	Comparator	Commercial	Through-Hole	16	DIP	Rectangular	Plastic/Epoxy	0 V	10 mV		No	4		8 μA	0 V	3 V	±1.25/±5.5/2.5/11 V	In-Line	DIP8,.3	Comparators	12 V	0.1 in (2.54 mm)	70 °C (158 °F)		300 µs	Open-Drain	0 °C (32 °F)	Matte Tin	Dual	R-PDIP-T16	1	0.225 in (5.72 mm)	0.3 in (7.62 mm)	No	e3	30 s	260 °C (500 °F)
MAX916CSE	Maxim Integrated	Comparator	Commercial	Gull Wing	16	SOP	Rectangular	Plastic/Epoxy	-6 V	2.5 mV	15 uA	Yes	2	CMOS	44 mA	-5 V	5 V	5/±5 V	Small Outline	SOP16,.25	Comparators	6 V	0.05 in (1.27 mm)	70 °C (158 °F)	10 uA	6 ns		0 °C (32 °F)	Tin Lead	Dual	R-PDSO-G16		0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e0			0.39 in (9.9 mm)
MAX9686CTW	Maxim Integrated	Comparator	Commercial	Wire	10		Round	Metal		3 mV			1	BIPOLAR	25 mA	-5 V	5 V	±5 V	Cylindrical	CAN10,.23	Comparators			70 °C (158 °F)	25 uA	6 ns		0 °C (32 °F)	Tin/Lead	Bottom	O-MBCY-W10					e0
MAX9967ALCCQ-D	Maxim Integrated	Comparator	Commercial	Gull Wing	100	HTFQFP	Square	Plastic/Epoxy	-7 V	20 mV	25 uA	Yes	2	BIPOLAR		-5.25 V	9.75 V		Flatpack, Heat Sink/Slug, Thin Profile, Fine Pitch		Comparators	11.5 V	0.02 in (0.5 mm)	70 °C (158 °F)		2.2 ns	Open-Collector	0 °C (32 °F)	Tin Lead	Quad	S-PQFP-G100	3	0.047 in (1.2 mm)	0.551 in (14 mm)	No	e0			0.551 in (14 mm)
MAX972C/D	Maxim Integrated	Comparator	Commercial	No Lead	8	DIE	Rectangular			10 mV		Yes	2	CMOS	3.2 μA		5 V		Uncased Chip		Comparators	12 V		70 °C (158 °F)		300 µs	Open-Drain	0 °C (32 °F)	Tin Lead	Upper	R-XUUC-N8	1			No	e0
MAX9698BCPE	Maxim Integrated	Comparator	Commercial	Through-Hole	8	DIP	Rectangular	Plastic/Epoxy	-6 V	3 mV	25 uA	No	1	BIPOLAR		-5 V	5 V		In-Line		Comparators	6 V	0.1 in (2.54 mm)	70 °C (158 °F)		6 ns		0 °C (32 °F)	Tin Lead	Dual	R-PDIP-T8		0.18 in (4.572 mm)	0.3 in (7.62 mm)		e0			0.369 in (9.375 mm)
MAX9973HCCB	Maxim Integrated	Comparator	Commercial	Gull Wing	64	HTFQFP	Square	Plastic/Epoxy	-6 V	50 mV		Yes	1	BICMOS		-4.75 V	9.75 V		Flatpack, Heat Sink/Slug, Thin Profile, Fine Pitch			11 V	0.02 in (0.5 mm)	70 °C (158 °F)		1.2 ns	Open-Collector	0 °C (32 °F)	Tin Lead	Quad	S-PQFP-G64	3	0.047 in (1.2 mm)	0.394 in (10 mm)	No	e0			0.394 in (10 mm)
MAX971CSA-T	Maxim Integrated	Comparator	Commercial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	0 V	10 mV		Yes	1		3.8 μA	0 V	3 V	±1.25/±5.5/2.5/11 V	Small Outline	SOP8,.25	Comparators	12 V	0.05 in (1.27 mm)	70 °C (158 °F)		300 µs	Open-Drain	0 °C (32 °F)	Tin Lead	Dual	R-PDSO-G8				No	e0
MAX981CUA	Maxim Integrated	Comparator	Commercial	Gull Wing	8	SOP	Square	Plastic/Epoxy	0 V	10 mV		Yes	1		3.8 μA	0 V	3 V	±1.25/±5.5/2.5/11 V	Small Outline	TSSOP8,.19	Comparators	12 V	0.025 in (0.635 mm)	70 °C (158 °F)		300 µs	Open-Drain	0 °C (32 °F)	Tin Lead	Dual	S-PDSO-G8	1			No	e0
MAX942C/D	Maxim Integrated	Comparator	Commercial	No Lead	8	DIE	Rectangular			2 mV		Yes	2	CMOS			3 V		Uncased Chip		Comparators	7 V		70 °C (158 °F)				0 °C (32 °F)	Tin Lead	Upper	R-XUUC-N8	1			No	e0
MAX9964BGCCQ-D	Maxim Integrated	Comparator	Commercial	Gull Wing	100	HTFQFP	Square	Plastic/Epoxy	-7 V	100 mV	25 uA	Yes	4	BIPOLAR		-5.25 V	9.75 V		Flatpack, Heat Sink/Slug, Thin Profile, Fine Pitch		Comparators	11.5 V	0.02 in (0.5 mm)	70 °C (158 °F)			Open-Collector	0 °C (32 °F)	Tin Lead	Quad	S-PQFP-G100		0.047 in (1.2 mm)	0.551 in (14 mm)	No	e0			0.551 in (14 mm)
MAX9961ADCCQ+TD	Maxim Integrated	Comparator	Commercial	Gull Wing	100	HTFQFP	Square	Plastic/Epoxy	-7 V	20 mV	25 uA	Yes	2	BIPOLAR		-5.25 V	9.75 V		Flatpack, Heat Sink/Slug, Thin Profile, Fine Pitch		Comparators	11.5 V	0.02 in (0.5 mm)	70 °C (158 °F)		2.2 ns	Open-Collector	0 °C (32 °F)	Matte Tin	Quad	S-PQFP-G100		0.047 in (1.2 mm)	0.551 in (14 mm)	No	e3			0.551 in (14 mm)
MAX922CPA+	Maxim Integrated	Comparator	Commercial	Through-Hole	8	DIP	Rectangular	Plastic/Epoxy	-0.3 V	10 mV		No	2	CMOS	4 μA		3 V	±1.25/±5.5/2.5/11 V	In-Line	DIP8,.3	Comparators	12 V	0.1 in (2.54 mm)	70 °C (158 °F)		14 µs		0 °C (32 °F)	Matte Tin	Dual	R-PDIP-T8	1	0.18 in (4.572 mm)	0.3 in (7.62 mm)	No	e3	30 s	260 °C (500 °F)	0.369 in (9.375 mm)
MAX9698C/D	Maxim Integrated	Comparator	Commercial	No Lead	14	DIE	Rectangular		-6 V	3 mV	25 uA	Yes	2	BIPOLAR	90 mA	-5 V	5 V	±5 V	Uncased Chip	DIE OR CHIP	Comparators	6 V		70 °C (158 °F)	25 uA	6 ns		0 °C (32 °F)	Tin Lead	Upper	R-XUUC-N14				No	e0
MAX9965BGCCQ-D	Maxim Integrated	Comparator	Commercial	Gull Wing	100	HTFQFP	Square	Plastic/Epoxy	-7 V	100 mV	25 uA	Yes	4	BIPOLAR		-5.25 V	9.75 V		Flatpack, Heat Sink/Slug, Thin Profile, Fine Pitch		Comparators	11.5 V	0.02 in (0.5 mm)	70 °C (158 °F)		1.2 ns	Open-Collector	0 °C (32 °F)	Tin Lead	Quad	S-PQFP-G100	3	0.047 in (1.2 mm)	0.551 in (14 mm)	No	e0			0.551 in (14 mm)
MAX9686CTV	Maxim Integrated	Comparator	Commercial	Wire	8		Round	Metal	-6 V	3 mV	25 uA	No	1	BIPOLAR	45 mA	-5 V	5 V	±5 V	Cylindrical	CAN8,.2	Comparators	6 V		70 °C (158 °F)	25 uA	6 ns		0 °C (32 °F)	Tin Lead	Bottom	O-MBCY-W8				No	e0
MAX9961BLCCQ+TD	Maxim Integrated	Comparator	Commercial	Gull Wing	100	HTFQFP	Square	Plastic/Epoxy	-7 V	100 mV	25 uA	Yes	2	BIPOLAR		-5.25 V	9.75 V		Flatpack, Heat Sink/Slug, Thin Profile, Fine Pitch			11.5 V	0.02 in (0.5 mm)	70 °C (158 °F)		2.2 ns	Open-Collector	0 °C (32 °F)	Matte Tin	Quad	S-PQFP-G100		0.047 in (1.2 mm)	0.551 in (14 mm)	No	e3			0.551 in (14 mm)
MAX974CSE	Maxim Integrated	Comparator	Commercial	Gull Wing	16	SOP	Rectangular	Plastic/Epoxy	0 V	10 mV		Yes	4		8 μA	0 V	3 V	±1.25/±5.5/2.5/11 V	Small Outline	SOP8,.25	Comparators	12 V	0.05 in (1.27 mm)	70 °C (158 °F)		300 µs	Open-Drain	0 °C (32 °F)	Tin Lead	Dual	R-PDSO-G16	1			No	e0
MAX9967BMCCQ	Maxim Integrated	Comparator	Commercial	Gull Wing	100	HTFQFP	Square	Plastic/Epoxy	-7 V	100 mV	25 uA	Yes	2	BIPOLAR		-5.25 V	9.75 V		Flatpack, Heat Sink/Slug, Thin Profile, Fine Pitch			11.5 V	0.02 in (0.5 mm)	70 °C (158 °F)		2.2 ns	Open-Emitter	0 °C (32 °F)	Tin Lead	Quad	S-PQFP-G100	3	0.047 in (1.2 mm)	0.551 in (14 mm)	No	e0			0.551 in (14 mm)
MAX9963AGCCQ-TD	Maxim Integrated	Comparator	Commercial	Gull Wing	100	HTFQFP	Square	Plastic/Epoxy	-7 V	15 mV	25 uA	Yes	4	BIPOLAR		-5.25 V	9.75 V		Flatpack, Heat Sink/Slug, Thin Profile, Fine Pitch		Comparators	11.5 V	0.02 in (0.5 mm)	70 °C (158 °F)		2.2 ns	Open-Collector	0 °C (32 °F)	Tin Lead	Quad	S-PQFP-G100		0.047 in (1.2 mm)	0.551 in (14 mm)	No	e0			0.551 in (14 mm)
MAX901BC/D	Maxim Integrated	Comparator	Commercial	No Lead	20	DIE	Rectangular		-6 V	6 mV	15 uA	Yes	4	CMOS	25 mA	-5 V	5 V	5,5/10,GND/-5 V	Uncased Chip	DIE OR CHIP	Comparators	6 V		70 °C (158 °F)	10 uA	10 ns		0 °C (32 °F)	Tin Lead	Upper	R-XUUC-N20	1			No	e0	20 s	240 °C (464 °F)
MAX981CUA-T	Maxim Integrated	Comparator	Commercial	Gull Wing	8	SOP	Square	Plastic/Epoxy	0 V	10 mV		Yes	1		3.8 μA	0 V	3 V	±1.25/±5.5/2.5/11 V	Small Outline	TSSOP8,.19	Comparators	12 V	0.025 in (0.635 mm)	70 °C (158 °F)		300 µs	Open-Drain	0 °C (32 °F)	Tin Lead	Dual	S-PDSO-G8				No	e0
MAX901ACSE-T	Maxim Integrated	Comparator	Commercial	Gull Wing	16	SOP	Rectangular	Plastic/Epoxy	-6 V	3 mV	10 uA	Yes	4	CMOS	25 mA	-5 V	5 V	5,5/10,GND/-5 V	Small Outline	SOP16,.25	Comparators	6 V	0.05 in (1.27 mm)	70 °C (158 °F)	6 uA	10 ns		0 °C (32 °F)	Tin Lead	Dual	R-PDSO-G16	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e0			0.39 in (9.9 mm)
MAX9961BLCCQ	Maxim Integrated	Comparator	Commercial	Gull Wing	100	HTFQFP	Square	Plastic/Epoxy	-7 V	100 mV	25 uA	Yes	2	BIPOLAR		-5.25 V	9.75 V		Flatpack, Heat Sink/Slug, Thin Profile, Fine Pitch		Comparators	11.5 V	0.02 in (0.5 mm)	70 °C (158 °F)		2.2 ns	Open-Collector	0 °C (32 °F)	Tin Lead	Quad	S-PQFP-G100	3	0.047 in (1.2 mm)	0.551 in (14 mm)	No	e0			0.551 in (14 mm)
MAX9961BDCCQ-TD	Maxim Integrated	Comparator	Commercial	Gull Wing	100	HTFQFP	Square	Plastic/Epoxy	-7 V	100 mV	25 uA	Yes	2	BIPOLAR		-5.25 V	9.75 V		Flatpack, Heat Sink/Slug, Thin Profile, Fine Pitch		Comparators	11.5 V	0.02 in (0.5 mm)	70 °C (158 °F)		2.2 ns	Open-Collector	0 °C (32 °F)	Tin Lead	Quad	S-PQFP-G100		0.047 in (1.2 mm)	0.551 in (14 mm)	No	e0			0.551 in (14 mm)
MAX9973GCCB+	Maxim Integrated	Comparator	Commercial	Gull Wing	64	HTFQFP	Square	Plastic/Epoxy	-6 V	50 mV		Yes	1	BICMOS		-4.75 V	9.75 V		Flatpack, Heat Sink/Slug, Thin Profile, Fine Pitch			11 V	0.02 in (0.5 mm)	70 °C (158 °F)		1.2 ns	Open-Collector	0 °C (32 °F)	Tin	Quad	S-PQFP-G64	3	0.047 in (1.2 mm)	0.394 in (10 mm)	No	e3			0.394 in (10 mm)
MAX915CSA	Maxim Integrated	Comparator	Commercial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	-6 V	1.4 mV	15 uA	Yes	1	CMOS	22 mA	-5 V	5 V	5/±5 V	Small Outline	SOP8,.25	Comparators	6 V	0.05 in (1.27 mm)	70 °C (158 °F)	10 uA	6 ns		0 °C (32 °F)	Tin Lead	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e0		245 °C (473 °F)	0.193 in (4.9 mm)
MAX9967ALCCQ+TD	Maxim Integrated	Comparator	Commercial	Gull Wing	100	HTFQFP	Square	Plastic/Epoxy	-7 V	20 mV	25 uA	Yes	2	BIPOLAR		-5.25 V	9.75 V		Flatpack, Heat Sink/Slug, Thin Profile, Fine Pitch		Comparators	11.5 V	0.02 in (0.5 mm)	70 °C (158 °F)		2.2 ns	Open-Collector	0 °C (32 °F)	Matte Tin	Quad	S-PQFP-G100		0.047 in (1.2 mm)	0.551 in (14 mm)	No	e3			0.551 in (14 mm)
MXL1016CN8	Maxim Integrated	Comparator	Commercial	Through-Hole	8	DIP	Rectangular	Plastic/Epoxy	-7 V	3.5 mV	13 uA	No	1	TTL	35 mA	-5 V	5 V	5/±5 V	In-Line	DIP8,.3	Comparators	7 V	0.1 in (2.54 mm)	70 °C (158 °F)	10 uA	10 ns	Push-Pull	0 °C (32 °F)	Tin Lead	Dual	R-PDIP-T8	1	0.18 in (4.572 mm)	0.3 in (7.62 mm)	No	e0		245 °C (473 °F)	0.369 in (9.375 mm)
MAX905CPD	Maxim Integrated	Comparator	Commercial	Through-Hole	14	DIP	Rectangular	Plastic/Epoxy	-6 V	1.5 mV	10 uA	No	1		24 mA	-5 V	5 V	5/GND,-5/-5.2 V	In-Line	DIP14,.3	Comparators	6 V	0.1 in (2.54 mm)	70 °C (158 °F)	10 uA	2 ns		0 °C (32 °F)	Tin/Lead	Dual	R-PDIP-T14		0.225 in (5.72 mm)	0.3 in (7.62 mm)	No	e0
MAX9972BCCS-T	Maxim Integrated	Comparator	Commercial	Gull Wing	80	HTFQFP	Square	Plastic/Epoxy	-6.25 V	100 mV	100 uA	Yes	4	BICMOS		-5 V	8 V		Flatpack, Heat Sink/Slug, Thin Profile, Fine Pitch			9.4 V	0.02 in (0.5 mm)	70 °C (158 °F)		2 ns	Open-Drain	0 °C (32 °F)	Tin Lead	Quad	S-PQFP-G80	3	0.047 in (1.2 mm)	0.472 in (12 mm)	No	e0			0.472 in (12 mm)
MAX9967ADCCQ	Maxim Integrated	Comparator	Commercial	Gull Wing	100	HTFQFP	Square	Plastic/Epoxy	-7 V	20 mV	25 uA	Yes	2	BIPOLAR		-5.25 V	9.75 V		Flatpack, Heat Sink/Slug, Thin Profile, Fine Pitch		Comparators	11.5 V	0.02 in (0.5 mm)	70 °C (158 °F)		2.2 ns	Open-Collector	0 °C (32 °F)	Tin Lead	Quad	S-PQFP-G100	3	0.047 in (1.2 mm)	0.551 in (14 mm)	No	e0			0.551 in (14 mm)
MAX9974GCCB	Maxim Integrated	Comparator	Commercial	Gull Wing	64	HTFQFP	Square	Plastic/Epoxy	-6 V	50 mV		Yes	1	BICMOS		-4.75 V	9.75 V		Flatpack, Heat Sink/Slug, Thin Profile, Fine Pitch		Comparators	11 V	0.02 in (0.5 mm)	70 °C (158 °F)		1.2 ns	Open-Collector	0 °C (32 °F)	Tin Lead	Quad	S-PQFP-G64	3	0.047 in (1.2 mm)	0.394 in (10 mm)	No	e0			0.394 in (10 mm)
MXL1116CS8	Maxim Integrated	Comparator	Commercial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	-7 V	3.5 mV	20 uA	Yes	1	TTL	38 mA	-5 V	5 V	5/±5 V	Small Outline	SOP8,.25	Comparators	7 V	0.05 in (1.27 mm)	70 °C (158 °F)	20 uA	18 ns		0 °C (32 °F)	Tin Lead	Dual	R-PDSO-G8	1			No	e0
MAX922CUA+	Maxim Integrated	Comparator	Commercial	Gull Wing	8	TSSOP	Square	Plastic/Epoxy	-0.3 V	10 mV		Yes	2	CMOS	4 μA		3 V	±1.25/±5.5/2.5/11 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.19	Comparators	12 V	0.026 in (0.65 mm)	70 °C (158 °F)		14 µs		0 °C (32 °F)	Matte Tin	Dual	S-PDSO-G8	1	0.043 in (1.1 mm)	0.118 in (3 mm)	No	e3	30 s	260 °C (500 °F)	0.118 in (3 mm)
MAX910CNG-T	Maxim Integrated	Comparator	Commercial	Through-Hole	24	DIP	Rectangular	Plastic/Epoxy	-6 V	5 mV	8 uA	No	1		30 mA	-5 V	5 V		In-Line			6 V	0.1 in (2.54 mm)	70 °C (158 °F)		15 ns		0 °C (32 °F)	Tin Lead	Dual	R-PDIP-T24		0.225 in (5.72 mm)	0.3 in (7.62 mm)	No	e0
MAX983CUA-T	Maxim Integrated	Comparator	Commercial	Gull Wing	8	SOP	Square	Plastic/Epoxy	0 V	10 mV		Yes	2		5.8 μA	0 V	3 V	±1.25/±5.5/2.5/11 V	Small Outline	TSSOP8,.19	Comparators	12 V	0.025 in (0.635 mm)	70 °C (158 °F)		300 µs	Open-Drain	0 °C (32 °F)	Tin Lead	Dual	S-PDSO-G8	1			No	e0		245 °C (473 °F)
MAX901ACPE+	Maxim Integrated	Comparator	Commercial	Through-Hole	16	DIP	Rectangular	Plastic/Epoxy		3 mV	10 uA	No	4			-5 V	5 V		In-Line		Comparators	12 V		70 °C (158 °F)		10 ns		0 °C (32 °F)	Matte Tin	Dual	R-PDIP-T16	1				e3	30 s	260 °C (500 °F)
MAX911C/D	Maxim Integrated	Comparator	Commercial	No Lead	24	DIE	Rectangular		-6 V	3 mV	6 uA	Yes	1		30 mA	-5 V	5 V	±5 V	Uncased Chip	DIE OR CHIP	Comparators	6 V		70 °C (158 °F)	6 uA	6 ns		0 °C (32 °F)	Tin Lead	Upper	R-XUUC-N24				No	e0
MAX9963AGCCQ+D	Maxim Integrated	Comparator	Commercial	Gull Wing	100	HTFQFP	Square	Plastic/Epoxy	-7 V	15 mV	25 uA	Yes	4	BIPOLAR		-5.25 V	9.75 V		Flatpack, Heat Sink/Slug, Thin Profile, Fine Pitch		Comparators	11.5 V	0.02 in (0.5 mm)	70 °C (158 °F)		2.2 ns	Open-Collector	0 °C (32 °F)	Matte Tin	Quad	S-PQFP-G100	3	0.047 in (1.2 mm)	0.551 in (14 mm)	No	e3	30 s	260 °C (500 °F)	0.551 in (14 mm)
MAX9963BJCCQ-TD	Maxim Integrated	Comparator	Commercial	Gull Wing	100	HTFQFP	Square	Plastic/Epoxy	-7 V	100 mV	25 uA	Yes	4	BIPOLAR		-5.25 V	9.75 V		Flatpack, Heat Sink/Slug, Thin Profile, Fine Pitch		Comparators	11.5 V	0.02 in (0.5 mm)	70 °C (158 °F)		2.2 ns	Open-Emitter	0 °C (32 °F)	Tin Lead	Quad	S-PQFP-G100		0.047 in (1.2 mm)	0.551 in (14 mm)	No	e0			0.551 in (14 mm)
MAX900ACWP-T	Maxim Integrated	Comparator	Commercial	Gull Wing	20	SOP	Rectangular	Plastic/Epoxy	-6 V	3 mV	10 uA	Yes	4	CMOS	25 mA	-5 V	5 V	5,5/10,GND/-5 V	Small Outline	SOP20,.4	Comparators	6 V	0.05 in (1.27 mm)	70 °C (158 °F)	6 uA	10 ns		0 °C (32 °F)	Tin Lead	Dual	R-PDSO-G20		0.104 in (2.65 mm)	0.295 in (7.5 mm)	No	e0			0.504 in (12.8 mm)
MAX9687C/D	Maxim Integrated	Comparator	Commercial	No Lead	16	DIE	Rectangular		-6 V	7 mV	30 uA	Yes	2	BIPOLAR		-5 V	5 V	5,-5.2 V	Uncased Chip	DIE OR CHIP	Comparators	6 V		70 °C (158 °F)	20 uA		Open-Emitter	0 °C (32 °F)	Tin Lead	Upper	R-XUUC-N16				No	e0
MAX9974HCCB	Maxim Integrated	Comparator	Commercial	Gull Wing	64	HTFQFP	Square	Plastic/Epoxy	-6 V	50 mV		Yes	1	BICMOS		-4.75 V	9.75 V		Flatpack, Heat Sink/Slug, Thin Profile, Fine Pitch		Comparators	11 V	0.02 in (0.5 mm)	70 °C (158 °F)		1.2 ns	Open-Collector	0 °C (32 °F)	Tin Lead	Quad	S-PQFP-G64	3	0.047 in (1.2 mm)	0.394 in (10 mm)	No	e0			0.394 in (10 mm)
MAX905C/D	Maxim Integrated	Comparator	Commercial	No Lead	13	DIE	Rectangular		-6 V	1 mV	10 uA	Yes	1		24 mA	-5 V	5 V	5/GND,-5/-5.2 V	Uncased Chip	DIE OR CHIP	Comparators	6 V		70 °C (158 °F)	10 uA	2 ns		0 °C (32 °F)	Tin/Lead	Upper	R-XUUC-N13				No	e0
MAX910C/D	Maxim Integrated	Comparator	Commercial	No Lead	24	DIE	Rectangular		-6 V	3 mV	6 uA	Yes	1		30 mA	-5 V	5 V	±5 V	Uncased Chip	DIE OR CHIP	Comparators	6 V		70 °C (158 °F)	6 uA	10 ns		0 °C (32 °F)	Tin Lead	Upper	R-XUUC-N24				No	e0

Comparators

Comparators are electronic circuits that compare two input voltages and output a voltage signal that indicates which of the inputs is larger. A comparator is similar to an operational amplifier (op-amp), but it is designed to operate with a limited range of voltage outputs (typically near the power supply rails) and with very high gain.

A comparator typically has two input terminals, a non-inverting (+) input and an inverting (-) input, and one output. When the voltage at the non-inverting input is greater than the voltage at the inverting input, the output of the comparator switches to its maximum positive voltage. Conversely, when the voltage at the inverting input is greater than the voltage at the non-inverting input, the output of the comparator switches to its maximum negative voltage.

Comparators are often used in applications where a precise measurement or detection of voltage level is required, such as in voltage reference circuits, level detectors, and waveform generators. They can also be used to implement digital logic circuits and are frequently used in A/D converters and motor control circuits.

It is worth noting that a comparator output can switch quickly between its high and low states, so they can be sensitive to noise and require careful circuit design to ensure proper operation. In addition, some comparators may include features such as hysteresis, which can help to reduce noise and ensure stable operation in the presence of small fluctuations in the input signals.