Commercial Comparators 1,788

Reset All

Part	Manufacturer	Amplifier Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Maximum Negative Supply Voltage Limit	Maximum Input Offset Voltage	Maximum Average Bias Current (IIB)	Surface Mount	No. of Functions	Technology	Maximum Supply Current	Nominal Negative Supply Voltage (Vsup)	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Sub-Category	Maximum Supply Voltage Limit	Terminal Pitch	Maximum Operating Temperature	Maximum Bias Current (IIB) @25C	Nominal Response Time	Output Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length
MAX903CSA-T	Maxim Integrated	Comparator	Commercial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	-6 V	6 mV	15 uA	Yes	1	CMOS	6 mA	-5 V	5 V	5,5/10,GND/-5 V	Small Outline	SOP8,.3	Comparators	6 V	0.05 in (1.27 mm)	70 °C (158 °F)	10 uA	10 ns		0 °C (32 °F)	Tin Lead	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e0			0.193 in (4.9 mm)
MAX981CSA-T	Maxim Integrated	Comparator	Commercial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	0 V	10 mV		Yes	1		3.8 μA	0 V	3 V	±1.25/±5.5/2.5/11 V	Small Outline	SOP8,.25	Comparators	12 V	0.05 in (1.27 mm)	70 °C (158 °F)		300 µs	Open-Drain	0 °C (32 °F)	Tin Lead	Dual	R-PDSO-G8				No	e0
MAX9698BCSE+T	Maxim Integrated	Comparator	Commercial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	-6 V	3 mV	25 uA	Yes	1	BIPOLAR		-5 V	5 V		Small Outline		Comparators	6 V		70 °C (158 °F)		6 ns		0 °C (32 °F)		Dual	R-PDSO-G8
MAX984CSE-T	Maxim Integrated	Comparator	Commercial	Gull Wing	16	SOP	Rectangular	Plastic/Epoxy	0 V	10 mV		Yes	4		8 μA	0 V	3 V	±1.25/±5.5/2.5/11 V	Small Outline	SOP8,.25	Comparators	12 V	0.05 in (1.27 mm)	70 °C (158 °F)		300 µs	Open-Drain	0 °C (32 °F)	Tin Lead	Dual	R-PDSO-G16				No	e0
MAX9967ADCCQ-TD	Maxim Integrated	Comparator	Commercial	Gull Wing	100	HTFQFP	Square	Plastic/Epoxy	-7 V	20 mV	25 uA	Yes	2	BIPOLAR		-5.25 V	9.75 V		Flatpack, Heat Sink/Slug, Thin Profile, Fine Pitch		Comparators	11.5 V	0.02 in (0.5 mm)	70 °C (158 °F)		2.2 ns	Open-Collector	0 °C (32 °F)	Tin Lead	Quad	S-PQFP-G100		0.047 in (1.2 mm)	0.551 in (14 mm)	No	e0			0.551 in (14 mm)
MAX941CSA-T	Maxim Integrated	Comparator	Commercial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy		3 mV	300 nA	Yes	1	BIPOLAR	700 μA		3 V	3/5 V	Small Outline	SOP8,.25	Comparators	6.5 V	0.05 in (1.27 mm)	70 °C (158 °F)	300 nA	80 ns		0 °C (32 °F)	Tin Lead	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e0			0.193 in (4.9 mm)
MAX9964BGCCQ	Maxim Integrated	Comparator	Commercial	Gull Wing	100	HTFQFP	Square	Plastic/Epoxy	-7 V	100 mV	25 uA	Yes	4	BIPOLAR		-5.25 V	9.75 V		Flatpack, Heat Sink/Slug, Thin Profile, Fine Pitch		Comparators	11.5 V	0.02 in (0.5 mm)	70 °C (158 °F)		2.2 ns	Open-Collector	0 °C (32 °F)	Tin Lead	Quad	S-PQFP-G100	3	0.047 in (1.2 mm)	0.551 in (14 mm)	No	e0			0.551 in (14 mm)
MAX9686BCSA+T	Maxim Integrated	Comparator	Commercial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	-6 V	3 mV	25 uA	Yes	1	BIPOLAR		-5 V	5 V		Small Outline		Comparators	6 V		70 °C (158 °F)		6 ns		0 °C (32 °F)		Dual	R-PDSO-G8
MAX902CPD	Maxim Integrated	Comparator	Commercial	Through-Hole	14	DIP	Rectangular	Plastic/Epoxy	-6 V	6 mV	15 uA	No	2	CMOS	12 mA	-5 V	5 V	5,5/10,GND/-5 V	In-Line	DIP14,.3	Comparators	6 V	0.1 in (2.54 mm)	70 °C (158 °F)	10 uA	10 ns		0 °C (32 °F)	Tin Lead	Dual	R-PDIP-T14	1	0.18 in (4.572 mm)	0.3 in (7.62 mm)	No	e0			0.75 in (19.05 mm)
MAX9967BGCCQ	Maxim Integrated	Comparator	Commercial	Gull Wing	100	HTFQFP	Square	Plastic/Epoxy	-7 V	100 mV	25 uA	Yes	2	BIPOLAR		-5.25 V	9.75 V		Flatpack, Heat Sink/Slug, Thin Profile, Fine Pitch		Comparators	11.5 V	0.02 in (0.5 mm)	70 °C (158 °F)		2.2 ns	Open-Collector	0 °C (32 °F)	Tin Lead	Quad	S-PQFP-G100	3	0.047 in (1.2 mm)	0.551 in (14 mm)	No	e0			0.551 in (14 mm)
MAX9686BCPA	Maxim Integrated	Comparator	Commercial	Through-Hole	8	DIP	Rectangular	Plastic/Epoxy	-6 V	3 mV	25 uA	No	1	BIPOLAR		-5 V	5 V		In-Line		Comparators	6 V	0.1 in (2.54 mm)	70 °C (158 °F)		6 ns		0 °C (32 °F)	Tin Lead	Dual	R-PDIP-T8		0.18 in (4.572 mm)	0.3 in (7.62 mm)		e0			0.369 in (9.375 mm)
MAX9967ADCCQ-D	Maxim Integrated	Comparator	Commercial	Gull Wing	100	HTFQFP	Square	Plastic/Epoxy	-7 V	20 mV	25 uA	Yes	2	BIPOLAR		-5.25 V	9.75 V		Flatpack, Heat Sink/Slug, Thin Profile, Fine Pitch		Comparators	11.5 V	0.02 in (0.5 mm)	70 °C (158 °F)		2.2 ns	Open-Collector	0 °C (32 °F)	Tin Lead	Quad	S-PQFP-G100	3	0.047 in (1.2 mm)	0.551 in (14 mm)	No	e0			0.551 in (14 mm)
MAX9961ADCCQ+D	Maxim Integrated	Comparator	Commercial	Gull Wing	100	HTFQFP	Square	Plastic/Epoxy	-7 V	20 mV	25 uA	Yes	2	BIPOLAR		-5.25 V	9.75 V		Flatpack, Heat Sink/Slug, Thin Profile, Fine Pitch		Comparators	11.5 V	0.02 in (0.5 mm)	70 °C (158 °F)		2.2 ns	Open-Collector	0 °C (32 °F)	Matte Tin	Quad	S-PQFP-G100		0.047 in (1.2 mm)	0.551 in (14 mm)	No	e3			0.551 in (14 mm)
MAX9698BCSE-T	Maxim Integrated	Comparator	Commercial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	-6 V	3 mV	25 uA	Yes	1	BIPOLAR		-5 V	5 V		Small Outline		Comparators	6 V		70 °C (158 °F)		6 ns		0 °C (32 °F)		Dual	R-PDSO-G8
MAX921C/D	Maxim Integrated	Comparator	Commercial	No Lead	10	DIE	Rectangular		-0.3 V	10 mV		Yes	1	CMOS			3 V		Uncased Chip		Comparators	12 V		70 °C (158 °F)		14 µs		0 °C (32 °F)	Tin Lead	Upper	R-XUUC-N10				No	e0
MAX9961ALCCQ+D	Maxim Integrated	Comparator	Commercial	Gull Wing	100	HTFQFP	Square	Plastic/Epoxy	-7 V	20 mV	25 uA	Yes	2	BIPOLAR		-5.25 V	9.75 V		Flatpack, Heat Sink/Slug, Thin Profile, Fine Pitch		Comparators	11.5 V	0.02 in (0.5 mm)	70 °C (158 °F)		2.2 ns	Open-Collector	0 °C (32 °F)	Matte Tin	Quad	S-PQFP-G100		0.047 in (1.2 mm)	0.551 in (14 mm)	No	e3			0.551 in (14 mm)
MAX9963BJCCQ-D	Maxim Integrated	Comparator	Commercial	Gull Wing	100	HTFQFP	Square	Plastic/Epoxy	-7 V	100 mV	25 uA	Yes	4	BIPOLAR		-5.25 V	9.75 V		Flatpack, Heat Sink/Slug, Thin Profile, Fine Pitch		Comparators	11.5 V	0.02 in (0.5 mm)	70 °C (158 °F)		2.2 ns	Open-Emitter	0 °C (32 °F)	Tin Lead	Quad	S-PQFP-G100		0.047 in (1.2 mm)	0.551 in (14 mm)	No	e0			0.551 in (14 mm)
MAX900BCWP+T	Maxim Integrated	Comparator	Commercial	Gull Wing	20	SOP	Rectangular	Plastic/Epoxy	-6 V	6 mV	15 uA	Yes	4	CMOS	25 mA	-5 V	5 V	5,5/10,GND/-5 V	Small Outline	SOP20,.4	Comparators	6 V	0.05 in (1.27 mm)	70 °C (158 °F)	10 uA	10 ns		0 °C (32 °F)	Matte Tin	Dual	R-PDSO-G20	1	0.104 in (2.65 mm)	0.295 in (7.5 mm)	No	e3			0.504 in (12.8 mm)
MAX973CSA-T	Maxim Integrated	Comparator	Commercial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	0 V	10 mV		Yes	2		5.8 μA	0 V	3 V	±1.25/±5.5/2.5/11 V	Small Outline	SOP8,.25	Comparators	12 V	0.05 in (1.27 mm)	70 °C (158 °F)		300 µs	Open-Drain	0 °C (32 °F)	Tin Lead	Dual	R-PDSO-G8				No	e0
MAX971CPA	Maxim Integrated	Comparator	Commercial	Through-Hole	8	DIP	Rectangular	Plastic/Epoxy	0 V	10 mV		No	1		3.8 μA	0 V	3 V	±1.25/±5.5/2.5/11 V	In-Line	DIP8,.3	Comparators	12 V	0.1 in (2.54 mm)	70 °C (158 °F)		300 µs	Open-Drain	0 °C (32 °F)	Tin Lead	Dual	R-PDIP-T8	1	0.18 in (4.572 mm)		No	e0		245 °C (473 °F)	0.369 in (9.375 mm)
MAX9967ADCCQ+TD	Maxim Integrated	Comparator	Commercial	Gull Wing	100	HTFQFP	Square	Plastic/Epoxy	-7 V	20 mV	25 uA	Yes	2	BIPOLAR		-5.25 V	9.75 V		Flatpack, Heat Sink/Slug, Thin Profile, Fine Pitch		Comparators	11.5 V	0.02 in (0.5 mm)	70 °C (158 °F)		2.2 ns	Open-Collector	0 °C (32 °F)	Matte Tin	Quad	S-PQFP-G100		0.047 in (1.2 mm)	0.551 in (14 mm)	No	e3			0.551 in (14 mm)
MAX972CSA	Maxim Integrated	Comparator	Commercial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	0 V	10 mV		Yes	2		3.8 μA	0 V	3 V	±1.25/±5.5/2.5/11 V	Small Outline	SOP8,.25	Comparators	12 V	0.05 in (1.27 mm)	70 °C (158 °F)		300 µs	Open-Drain	0 °C (32 °F)	Tin Lead	Dual	R-PDSO-G8	1			No	e0
MAX9685CTW-4	Maxim Integrated	Comparator	Commercial	Wire	10		Round	Metal		7 mV				BIPOLAR	60 mA			5,-5.2 V	Cylindrical	CAN10,.23	Comparators			70 °C (158 °F)	20 uA	1.5 ns		0 °C (32 °F)	Tin/Lead	Bottom	O-MBCY-W10	1			No	e0
MAX9967BLCCQ-D	Maxim Integrated	Comparator	Commercial	Gull Wing	100	HTFQFP	Square	Plastic/Epoxy	-7 V	100 mV	25 uA	Yes	2	BIPOLAR		-5.25 V	9.75 V		Flatpack, Heat Sink/Slug, Thin Profile, Fine Pitch			11.5 V	0.02 in (0.5 mm)	70 °C (158 °F)		2.2 ns	Open-Collector	0 °C (32 °F)	Tin Lead	Quad	S-PQFP-G100	3	0.047 in (1.2 mm)	0.551 in (14 mm)	No	e0			0.551 in (14 mm)
MAX516ACNG	Maxim Integrated	Comparator	Commercial	Through-Hole	24	DIP	Rectangular	Plastic/Epoxy		10 mV	400 nA	No	4	CMOS	10 mA		4.75 V	5/15 V	In-Line	DIP24,.3	Comparators	17 V	0.1 in (2.54 mm)	70 °C (158 °F)	300 nA	800 ns		0 °C (32 °F)	Tin Lead	Dual	R-PDIP-T24	1	0.225 in (5.72 mm)	0.3 in (7.62 mm)	No	e0
MAX907CSA-T	Maxim Integrated	Comparator	Commercial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy		3.5 mV	500 nA	Yes	2	BIPOLAR	1 mA		5 V	5 V	Small Outline	SOP8,.25	Comparators	6 V	0.05 in (1.27 mm)	70 °C (158 °F)	300 nA	45 ns		0 °C (32 °F)	Tin Lead	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e0			0.193 in (4.9 mm)
MAX983CPA	Maxim Integrated	Comparator	Commercial	Through-Hole	8	DIP	Rectangular	Plastic/Epoxy	0 V	10 mV		No	2		5.8 μA	0 V	3 V	±1.25/±5.5/2.5/11 V	In-Line	DIP8,.3	Comparators	12 V	0.1 in (2.54 mm)	70 °C (158 °F)		300 µs	Open-Drain	0 °C (32 °F)	Tin Lead	Dual	R-PDIP-T8	1	0.18 in (4.572 mm)		No	e0		245 °C (473 °F)	0.369 in (9.375 mm)
MAX9967BDCCQ	Maxim Integrated	Comparator	Commercial	Gull Wing	100	HTFQFP	Square	Plastic/Epoxy	-7 V	100 mV	25 uA	Yes	2	BIPOLAR		-5.25 V	9.75 V		Flatpack, Heat Sink/Slug, Thin Profile, Fine Pitch		Comparators	11.5 V	0.02 in (0.5 mm)	70 °C (158 °F)		2.2 ns	Open-Collector	0 °C (32 °F)	Tin Lead	Quad	S-PQFP-G100	3	0.047 in (1.2 mm)	0.551 in (14 mm)	No	e0			0.551 in (14 mm)
MAX516BC/D	Maxim Integrated	Comparator	Commercial	No Lead	25	DIE	Rectangular			15 mV	400 nA	Yes	4	CMOS	10 mA		4.75 V	5/15 V	Uncased Chip	DIE OR CHIP	Comparators	17 V		70 °C (158 °F)	300 nA	800 ns		0 °C (32 °F)		Upper	R-XUUC-N25	1			No
MAX9961ADCCQ	Maxim Integrated	Comparator	Commercial	Gull Wing	100	HTFQFP	Square	Plastic/Epoxy	-7 V	20 mV	25 uA	Yes	2	BIPOLAR		-5.25 V	9.75 V		Flatpack, Heat Sink/Slug, Thin Profile, Fine Pitch		Comparators	11.5 V	0.02 in (0.5 mm)	70 °C (158 °F)		2.2 ns	Open-Collector	0 °C (32 °F)	Tin Lead	Quad	S-PQFP-G100	3	0.047 in (1.2 mm)	0.551 in (14 mm)	No	e0			0.551 in (14 mm)
MAX900ACPP	Maxim Integrated	Comparator	Commercial	Through-Hole	20	DIP	Rectangular	Plastic/Epoxy	-6 V	3 mV	10 uA	No	4	CMOS	25 mA	-5 V	5 V	5,5/10,GND/-5 V	In-Line	DIP20,.3	Comparators	6 V	0.1 in (2.54 mm)	70 °C (158 °F)	6 uA	10 ns		0 °C (32 °F)	Tin Lead	Dual	R-PDIP-T20	1	0.18 in (4.572 mm)	0.3 in (7.62 mm)	No	e0			1.03 in (26.16 mm)
MAX9973GCCB-TD	Maxim Integrated	Comparator	Commercial	Gull Wing	64	HTFQFP	Square	Plastic/Epoxy	-6 V	50 mV		Yes	1	BICMOS		-4.75 V	9.75 V		Flatpack, Heat Sink/Slug, Thin Profile, Fine Pitch			11 V	0.02 in (0.5 mm)	70 °C (158 °F)		1.2 ns	Open-Collector	0 °C (32 °F)	Tin Lead	Quad	S-PQFP-G64	3	0.047 in (1.2 mm)	0.394 in (10 mm)	No	e0			0.394 in (10 mm)
MAX9967BMCCQ+D	Maxim Integrated	Comparator	Commercial	Gull Wing	100	HTFQFP	Square	Plastic/Epoxy	-7 V	100 mV	25 uA	Yes	2	BIPOLAR		-5.25 V	9.75 V		Flatpack, Heat Sink/Slug, Thin Profile, Fine Pitch			11.5 V	0.02 in (0.5 mm)	70 °C (158 °F)		2.2 ns	Open-Emitter	0 °C (32 °F)	Matte Tin	Quad	S-PQFP-G100	3	0.047 in (1.2 mm)	0.551 in (14 mm)	No	e3	30 s	260 °C (500 °F)	0.551 in (14 mm)
MAX903CSA	Maxim Integrated	Comparator	Commercial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	-6 V	6 mV	15 uA	Yes	1	CMOS	6 mA	-5 V	5 V	5,5/10,GND/-5 V	Small Outline	SOP8,.3	Comparators	6 V	0.05 in (1.27 mm)	70 °C (158 °F)	10 uA	10 ns		0 °C (32 °F)	Tin Lead	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e0	20 s	240 °C (464 °F)	0.193 in (4.9 mm)
MAX9972ACCS	Maxim Integrated	Comparator	Commercial	Gull Wing	80	HTFQFP	Square	Plastic/Epoxy	-6.25 V	10 mV	100 uA	Yes	4	BICMOS		-5 V	8 V		Flatpack, Heat Sink/Slug, Thin Profile, Fine Pitch		Comparators	9.4 V	0.02 in (0.5 mm)	70 °C (158 °F)		2 ns	Open-Drain	0 °C (32 °F)	Tin Lead	Quad	S-PQFP-G80	3	0.047 in (1.2 mm)	0.472 in (12 mm)	No	e0			0.472 in (12 mm)
MAX9966BGCCQ+TD	Maxim Integrated	Comparator	Commercial	Gull Wing	100	HTFQFP	Square	Plastic/Epoxy	-7 V	100 mV	25 uA	Yes	4	BIPOLAR		-5.25 V	9.75 V		Flatpack, Heat Sink/Slug, Thin Profile, Fine Pitch		Comparators	11.5 V	0.02 in (0.5 mm)	70 °C (158 °F)		1.2 ns	Open-Collector	0 °C (32 °F)	Matte Tin	Quad	S-PQFP-G100	3	0.047 in (1.2 mm)	0.551 in (14 mm)	No	e3			0.551 in (14 mm)
MXL1016CS8-T	Maxim Integrated	Comparator	Commercial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	-7 V	3.5 mV	13 uA	Yes	1	TTL	35 mA	-5 V	5 V	5/±5 V	Small Outline	SOP8,.25	Comparators	7 V	0.05 in (1.27 mm)	70 °C (158 °F)	10 uA	10 ns	Push-Pull	0 °C (32 °F)	Tin Lead	Dual	R-PDSO-G8		0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e0			0.193 in (4.9 mm)
MAX9698BCSE	Maxim Integrated	Comparator	Commercial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	-6 V	3 mV	25 uA	Yes	1	BIPOLAR		-5 V	5 V		Small Outline		Comparators	6 V	0.05 in (1.27 mm)	70 °C (158 °F)		6 ns		0 °C (32 °F)	Tin Lead	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)		e0			0.193 in (4.9 mm)
MAX921CSA-T	Maxim Integrated	Comparator	Commercial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	-0.3 V	10 mV		Yes	1	CMOS	4 μA		3 V	±1.25/±5.5/2.5/11 V	Small Outline	SOP8,.25	Comparators	12 V	0.05 in (1.27 mm)	70 °C (158 °F)		14 µs		0 °C (32 °F)	Tin Lead	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e0			0.193 in (4.9 mm)
MAX9972BCCS	Maxim Integrated	Comparator	Commercial	Gull Wing	80	HTFQFP	Square	Plastic/Epoxy	-6.25 V	100 mV	100 uA	Yes	4	BICMOS		-5 V	8 V		Flatpack, Heat Sink/Slug, Thin Profile, Fine Pitch			9.4 V	0.02 in (0.5 mm)	70 °C (158 °F)		2 ns	Open-Drain	0 °C (32 °F)	Tin Lead	Quad	S-PQFP-G80	3	0.047 in (1.2 mm)	0.472 in (12 mm)	No	e0			0.472 in (12 mm)
MAX901BCSE	Maxim Integrated	Comparator	Commercial	Gull Wing	16	SOP	Rectangular	Plastic/Epoxy	-6 V	6 mV	15 uA	Yes	4	CMOS	25 mA	-5 V	5 V	5,5/10,GND/-5 V	Small Outline	SOP16,.25	Comparators	6 V	0.05 in (1.27 mm)	70 °C (158 °F)	10 uA	10 ns		0 °C (32 °F)	Tin Lead	Dual	R-PDSO-G16	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e0			0.39 in (9.9 mm)
MAX9965BJCCQ-D	Maxim Integrated	Comparator	Commercial	Gull Wing	100	HTFQFP	Square	Plastic/Epoxy	-7 V	100 mV	25 uA	Yes	4	BIPOLAR		-5.25 V	9.75 V		Flatpack, Heat Sink/Slug, Thin Profile, Fine Pitch		Comparators	11.5 V	0.02 in (0.5 mm)	70 °C (158 °F)		1.2 ns	Open-Emitter	0 °C (32 °F)	Tin Lead	Quad	S-PQFP-G100	3	0.047 in (1.2 mm)	0.551 in (14 mm)	No	e0			0.551 in (14 mm)
MAX906CPE	Maxim Integrated	Comparator	Commercial	Through-Hole	16	DIP	Rectangular	Plastic/Epoxy	-6 V	2.5 mV	10 uA	No	1		48 mA	-5 V	5 V	5/GND,-5/-5.2 V	In-Line	DIP16,.3	Comparators	6 V	0.1 in (2.54 mm)	70 °C (158 °F)	10 uA	2 ns		0 °C (32 °F)	Tin/Lead	Dual	R-PDIP-T16		0.225 in (5.72 mm)	0.3 in (7.62 mm)	No	e0
MAX9698BCPE-4	Maxim Integrated	Comparator	Commercial	Through-Hole	16	DIP	Rectangular	Plastic/Epoxy		9 mV		No		BIPOLAR	50 mA	-5 V	5 V	±5 V	In-Line	DIP16,.3	Comparators		0.1 in (2.54 mm)	70 °C (158 °F)	25 uA	6 ns		0 °C (32 °F)	Tin Lead	Dual	R-PDIP-T16				No	e0	20 s	240 °C (464 °F)
MAX921CSA	Maxim Integrated	Comparator	Commercial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	-0.3 V	10 mV		Yes	1	CMOS	4 μA		3 V	±1.25/±5.5/2.5/11 V	Small Outline	SOP8,.25	Comparators	12 V	0.05 in (1.27 mm)	70 °C (158 °F)		14 µs		0 °C (32 °F)	Tin Lead	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e0			0.193 in (4.9 mm)
MAX9685CPE-2	Maxim Integrated	Comparator	Commercial	Through-Hole	16	DIP	Rectangular	Plastic/Epoxy		7 mV		No		BIPOLAR	60 mA			5,-5.2 V	In-Line	DIP16,.3	Comparators		0.1 in (2.54 mm)	70 °C (158 °F)	20 uA	1.5 ns		0 °C (32 °F)	Tin/Lead	Dual	R-PDIP-T16					e0
MAX923CUA-T	Maxim Integrated	Comparator	Commercial	Gull Wing	8	TSSOP	Square	Plastic/Epoxy	-0.3 V	10 mV		Yes	2	CMOS	6 μA		3 V	±1.25/±5.5/2.5/11 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.19	Comparators	12 V	0.026 in (0.65 mm)	70 °C (158 °F)		14 µs		0 °C (32 °F)	Tin Lead	Dual	S-PDSO-G8	1	0.043 in (1.1 mm)	0.118 in (3 mm)	No	e0			0.118 in (3 mm)
MAX9686CJA	Maxim Integrated	Comparator	Commercial	Through-Hole	8	DIP	Rectangular	Ceramic, Glass-Sealed	-6 V	3 mV	25 uA	No	1	BIPOLAR	25 mA	-5 V	5 V	±5 V	In-Line	DIP8,.3	Comparators	6 V	0.1 in (2.54 mm)	70 °C (158 °F)	25 uA	6 ns		0 °C (32 °F)	Tin Lead	Dual	R-GDIP-T8		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No	e0

Comparators

Comparators are electronic circuits that compare two input voltages and output a voltage signal that indicates which of the inputs is larger. A comparator is similar to an operational amplifier (op-amp), but it is designed to operate with a limited range of voltage outputs (typically near the power supply rails) and with very high gain.

A comparator typically has two input terminals, a non-inverting (+) input and an inverting (-) input, and one output. When the voltage at the non-inverting input is greater than the voltage at the inverting input, the output of the comparator switches to its maximum positive voltage. Conversely, when the voltage at the inverting input is greater than the voltage at the non-inverting input, the output of the comparator switches to its maximum negative voltage.

Comparators are often used in applications where a precise measurement or detection of voltage level is required, such as in voltage reference circuits, level detectors, and waveform generators. They can also be used to implement digital logic circuits and are frequently used in A/D converters and motor control circuits.

It is worth noting that a comparator output can switch quickly between its high and low states, so they can be sensitive to noise and require careful circuit design to ensure proper operation. In addition, some comparators may include features such as hysteresis, which can help to reduce noise and ensure stable operation in the presence of small fluctuations in the input signals.