Texas Instruments Comparators 2,400+

Reset All

Part	Manufacturer	Amplifier Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Total Dose (V)	Package Body Material	Maximum Negative Supply Voltage Limit	Maximum Input Offset Voltage	Maximum Average Bias Current (IIB)	Surface Mount	No. of Functions	Technology	Screening Level	Maximum Supply Current	Nominal Negative Supply Voltage (Vsup)	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Sub-Category	Maximum Supply Voltage Limit	Terminal Pitch	Maximum Operating Temperature	Maximum Bias Current (IIB) @25C	Nominal Response Time	Output Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length
LT1011AMJG	Texas Instruments	Comparator	Military	Through-Hole	8	DIP	Rectangular		Ceramic, Glass-Sealed	-18 V	1.5 mV	50 nA	No	1	BIPOLAR		4 mA	-15 V		15 V	±15 V	In-Line	DIP8,.3	Comparators	18 V	0.1 in (2.54 mm)	125 °C (257 °F)	25 nA	150 ns		-55 °C (-67 °F)		Dual	R-GDIP-T8		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No				0.378 in (9.6 mm)
LM139J/NOPB	Texas Instruments	Comparator	Military	Through-Hole	14	DIP	Rectangular		Ceramic, Glass-Sealed		9 mV	300 nA	No	4	BIPOLAR					5 V		In-Line		Comparators	36 V	0.1 in (2.54 mm)	125 °C (257 °F)		1.3 µs	Open-Collector	-55 °C (-67 °F)		Dual	R-GDIP-T14	1	0.2 in (5.08 mm)	0.3 in (7.62 mm)	No				0.785 in (19.94 mm)
LMV339MDC	Texas Instruments	Comparator	Industrial	No Lead		DIE					7 mV	250 nA	Yes	4	BICMOS					5 V		Uncased Chip		Comparators	5.5 V		85 °C (185 °F)		600 ns	Open-Collector	-40 °C (-40 °F)		Upper	X-XUUC-N				No
5962-9673801VDX	Texas Instruments	Comparator	Military	Flat	14	DFP	Rectangular		Ceramic, Glass-Sealed	0 V	4 mV	-1 nA	Yes	4	BIPOLAR	MIL-PRF-38535 Class V		0 V		5 V		Flatpack		Comparators	36 V	0.05 in (1.27 mm)	125 °C (257 °F)		5 µs	Open-Collector	-55 °C (-67 °F)		Dual	R-GDFP-F14		0.08 in (2.032 mm)	0.25 in (6.35 mm)	Yes
LT1016CL	Texas Instruments	Comparator	Commercial	Wire	10		Round		Metal	-7 V	3.5 mV	13 uA	No	1	BIPOLAR		35 mA	-5 V		5 V	±5 V	Cylindrical	CAN10,.23	Comparators	7 V		70 °C (158 °F)	10 uA	10 ns		0 °C (32 °F)		Bottom	O-MBCY-W10				No
TLV1393IPWR	Texas Instruments	Comparator	Industrial	Gull Wing	8	TSSOP	Rectangular		Plastic/Epoxy		9 mV	-400 nA	Yes	2	BIPOLAR					3 V	3/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.25	Comparators	7 V	0.026 in (0.65 mm)	105 °C (221 °F)	250 nA	700 ns	Open-Collector	-40 °C (-40 °F)		Dual	R-PDSO-G8		0.047 in (1.2 mm)	0.118 in (3 mm)	No				0.173 in (4.4 mm)
LM311J	Texas Instruments	Comparator	Commercial	Through-Hole	14	DIP	Rectangular		Ceramic		10 mV		No	1	BIPOLAR			-15 V		15 V	±15 V	In-Line	DIP14,.3	Comparators		0.1 in (2.54 mm)	70 °C (158 °F)				0 °C (32 °F)		Dual	R-XDIP-T14				No
TLC3704MDREP	Texas Instruments	Comparator	Military	Gull Wing	14	SOP	Rectangular		Plastic/Epoxy	-18 V	10 mV	30 nA	Yes	4	CMOS					5 V		Small Outline		Comparators	18 V	0.05 in (1.27 mm)	125 °C (257 °F)		2.7 µs	Push-Pull	-55 °C (-67 °F)		Dual	R-PDSO-G14		0.069 in (1.75 mm)	0.154 in (3.9 mm)	No				0.341 in (8.65 mm)
TLV2354IDRG4	Texas Instruments	Comparator	Industrial	Gull Wing	14	SOP	Rectangular		Plastic/Epoxy		7 mV	2 nA	Yes	4	CMOS		600 μA		Tape And Reel	3 V	3/5 V	Small Outline	SOP14,.25	Comparators	8 V	0.05 in (1.27 mm)	85 °C (185 °F)	2 nA	640 ns	Open-Drain	-40 °C (-40 °F)	Nickel/Palladium/Gold	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4		260 °C (500 °F)	0.341 in (8.65 mm)
LMC7211AIM/NOPB	Texas Instruments	Comparator	Industrial	Gull Wing	8	SOP	Rectangular		Plastic/Epoxy	0 V	8 mV	1 nA	Yes	1	CMOS		12 μA	0 V	Tube	5 V	2.7/15 V	Small Outline	SOP8,.25	Comparators	16 V	0.05 in (1.27 mm)	85 °C (185 °F)	0.4 pA	4 µs	Push-Pull	-40 °C (-40 °F)	Matte Tin	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e3		260 °C (500 °F)	0.193 in (4.9 mm)
TLC3704CDB	Texas Instruments	Comparator	Commercial	Gull Wing	14	SSOP	Rectangular		Plastic/Epoxy		6.5 mV	600 pA	Yes	4	CMOS					5 V		Small Outline, Shrink Pitch			18 V	0.026 in (0.65 mm)	70 °C (158 °F)		2.7 µs	Push-Pull	0 °C (32 °F)		Dual	R-PDSO-G14		0.079 in (2 mm)	0.209 in (5.3 mm)	No				0.244 in (6.2 mm)
TL721DR	Texas Instruments	Comparator	Commercial	Gull Wing	8	SOP	Rectangular		Plastic/Epoxy	-7 V	1 mV		Yes	1	BIPOLAR		17 mA	-5.2 V				Small Outline				0.05 in (1.27 mm)	70 °C (158 °F)			Open-Emitter	0 °C (32 °F)		Dual	R-PDSO-G8		0.069 in (1.75 mm)	0.154 in (3.9 mm)	No				0.193 in (4.9 mm)
LM193AJ-MPR	Texas Instruments	Comparator	Military	Through-Hole	8	DIP	Rectangular		Ceramic, Glass-Sealed		4 mV	300 nA	No	2	BIPOLAR					5 V		In-Line		Comparators	36 V	0.1 in (2.54 mm)	125 °C (257 °F)		1.3 µs	Open-Collector	-55 °C (-67 °F)		Dual	R-GDIP-T8		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No
TLV7211ID	Texas Instruments	Comparator	Industrial	Gull Wing	8	SOP	Rectangular		Plastic/Epoxy	0 V	18 mV	0.04 pA	Yes	1	CMOS		14 μA	0 V	Tube	5 V	3/15 V	Small Outline	SOP8,.25	Comparators	16 V	0.05 in (1.27 mm)	85 °C (185 °F)	0.04 pA	10 µs	Push-Pull	-40 °C (-40 °F)	Nickel/Palladium/Gold	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4		260 °C (500 °F)	0.193 in (4.9 mm)
M38510/11202BPA	Texas Instruments	Comparator	Military	Through-Hole	8	DIP	Rectangular		Ceramic, Metal-Sealed Cofired	-18 V	7 mV	1 nA	No	2	BIPOLAR	MIL-PRF-38535 Class B	2.5 mA		Tube	15 V	5 V	In-Line	DIP8,.3	Comparators	18 V	0.1 in (2.54 mm)	125 °C (257 °F)	100 nA		Open-Collector, Open-Drain	-55 °C (-67 °F)	Tin/Lead	Dual	R-CDIP-T8				Yes	e0
PM2903BQDDFRQ1	Texas Instruments	Comparator		Gull Wing	8	TSSOP	Rectangular		Plastic/Epoxy		4 mV	50 nA	Yes	2		AEC-Q100	800 μA		Tape And Reel	5 V		Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.11	Comparators	38 V	0.026 in (0.65 mm)	125 °C (257 °F)	25 nA	1 µs	Open-Collector	-40 °C (-40 °F)		Dual	R-PDSO-G8		0.043 in (1.1 mm)	0.063 in (1.6 mm)					0.114 in (2.9 mm)
LM2901N-N	Texas Instruments	Comparator	Industrial	Through-Hole	14	DIP	Rectangular		Plastic/Epoxy		15 mV		No	4	BIPOLAR		2.5 mA			5 V	5 V	In-Line	DIP14,.3	Comparators		0.1 in (2.54 mm)	85 °C (185 °F)	250 nA	1.3 µs		-40 °C (-40 °F)		Dual	R-PDIP-T14				No
5962R9673802VCX	Texas Instruments	Comparator	Military	Through-Hole	14	DIP	Rectangular	100k Rad(Si)	Ceramic, Glass-Sealed	0 V	2 mV	-1 nA	No	4	BIPOLAR	MIL-PRF-38535 Class V		0 V		5 V		In-Line		Comparators	36 V	0.1 in (2.54 mm)	125 °C (257 °F)			Open-Collector	-55 °C (-67 °F)	Tin Lead	Dual	R-GDIP-T14		0.2 in (5.08 mm)	0.3 in (7.62 mm)	Yes	e0
LM306JG/P4	Texas Instruments	Comparator	Commercial	Through-Hole	8	DIP	Rectangular		Ceramic				No	1	BIPOLAR						12,-3/-12 V	In-Line	DIP8,.3	Comparators		0.1 in (2.54 mm)	70 °C (158 °F)				0 °C (32 °F)		Dual	R-XDIP-T8
LM319NP3	Texas Instruments	Comparator	Commercial	Through-Hole	14	DIP	Rectangular		Plastic/Epoxy		10 mV		No		BIPOLAR			-15 V		15 V	±15 V	In-Line	DIP14,.3	Comparators		0.1 in (2.54 mm)	70 °C (158 °F)				0 °C (32 °F)		Dual	R-PDIP-T14
LMV7239QDBVRQ1	Texas Instruments	Comparator	Automotive	Gull Wing	5	LSSOP	Rectangular		Plastic/Epoxy		8 mV	600 nA	Yes	1	BIPOLAR	AEC-Q100	95 μA			5 V		Small Outline, Low Profile, Shrink Pitch		Comparators	6 V	0.037 in (0.95 mm)	125 °C (257 °F)	400 nA	89 ns	Push-Pull	-40 °C (-40 °F)	Matte Tin	Dual	R-PDSO-G5	1	0.057 in (1.45 mm)	0.063 in (1.6 mm)		e3	30 s	260 °C (500 °F)	0.114 in (2.9 mm)
TL336CN3	Texas Instruments	Comparator	Commercial	Through-Hole	20	DIP	Rectangular		Plastic/Epoxy				No		BIPOLAR							In-Line	DIP20,.3	Comparators		0.1 in (2.54 mm)	70 °C (158 °F)				0 °C (32 °F)		Dual	R-PDIP-T20
LM219N	Texas Instruments	Comparator	Other	Through-Hole	14	DIP	Rectangular		Plastic/Epoxy		7 mV		No		BIPOLAR			-15 V		15 V	±15 V	In-Line	DIP14,.3	Comparators		0.1 in (2.54 mm)	85 °C (185 °F)				-25 °C (-13 °F)		Dual	R-PDIP-T14				No
TLV4041R5DBVR	Texas Instruments	Comparator	Automotive	Gull Wing	5	LSSOP	Rectangular		Plastic/Epoxy				Yes	1			5 μA		Tape And Reel	1.8 V		Small Outline, Low Profile, Shrink Pitch	TSOP5/6,.11,37		6 V	0.037 in (0.95 mm)	125 °C (257 °F)		360 ns	Push-Pull	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G5	1	0.057 in (1.45 mm)	0.063 in (1.6 mm)		e4	30 s	260 °C (500 °F)	0.114 in (2.9 mm)
TLC372CPWG4	Texas Instruments	Comparator	Commercial	Gull Wing	8	TSSOP	Rectangular		Plastic/Epoxy		6.5 mV	600 pA	Yes	2	CMOS		400 μA			5 V	5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.25	Comparators	18 V	0.026 in (0.65 mm)	70 °C (158 °F)		650 ns	Open-Drain	0 °C (32 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.047 in (1.2 mm)	0.118 in (3 mm)	No	e4	30 s	260 °C (500 °F)	0.173 in (4.4 mm)
SN72720N	Texas Instruments	Comparator	Commercial	Through-Hole	14	DIP	Rectangular		Plastic/Epoxy				No		BIPOLAR							In-Line	DIP14,.3	Comparators		0.1 in (2.54 mm)	70 °C (158 °F)				0 °C (32 °F)		Dual	R-PDIP-T14				No
TLC339CD	Texas Instruments	Comparator	Commercial	Gull Wing	14	SOP	Rectangular		Plastic/Epoxy		6.5 mV	600 pA	Yes	4	CMOS		80 μA		Tube	5 V	5 V	Small Outline	SOP14,.25	Comparators	18 V	0.05 in (1.27 mm)	70 °C (158 °F)	2 pA	2.5 µs	Open-Collector	0 °C (32 °F)	Nickel/Palladium/Gold	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4		260 °C (500 °F)	0.341 in (8.65 mm)
TLC374QN	Texas Instruments	Comparator	Automotive	Through-Hole	14	DIP	Rectangular		Plastic/Epoxy		5 mV	20 nA	No	4	CMOS		800 μA			5 V	5 V	In-Line	DIP14,.3	Comparators	18 V	0.1 in (2.54 mm)	125 °C (257 °F)	20 nA	650 ns	Open-Drain	-40 °C (-40 °F)		Dual	R-PDIP-T14		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No				0.76 in (19.305 mm)
TLV3404INE4	Texas Instruments	Comparator	Automotive	Through-Hole	14	DIP	Rectangular		Plastic/Epoxy	0 V	4.4 mV	1.5 nA	No	4			3.8 μA	0 V		5 V	±1.35/±8/2.7/16 V	In-Line	DIP14,.3	Comparators	17 V	0.1 in (2.54 mm)	125 °C (257 °F)	250 pA	175 µs	Open-Drain	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDIP-T14		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No	e4			0.76 in (19.305 mm)
JL111BCA	Texas Instruments	Comparator	Military	Through-Hole	14	DIP	Rectangular		Ceramic, Glass-Sealed	-30 V	3 mV	100 pA	No	1	BIPOLAR	MIL-STD-883		-15 V		15 V		In-Line		Comparators	30 V	0.1 in (2.54 mm)	125 °C (257 °F)		640 ns	Open-Collector	-55 °C (-67 °F)		Dual	R-GDIP-T14		0.2 in (5.08 mm)	0.3 in (7.62 mm)					0.785 in (19.94 mm)
TLV3404IPWG4	Texas Instruments	Comparator	Automotive	Gull Wing	14	TSSOP	Rectangular		Plastic/Epoxy	0 V	4.4 mV	1.5 nA	Yes	4			950 nA	0 V		5 V	±1.35/±8/2.7/16 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP14,.25	Comparators	17 V	0.026 in (0.65 mm)	125 °C (257 °F)	250 pA	175 µs	Open-Drain	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G14	1	0.047 in (1.2 mm)	0.173 in (4.4 mm)	No	e4	30 s	260 °C (500 °F)	0.197 in (5 mm)
TLV2354IDG4	Texas Instruments	Comparator	Industrial	Gull Wing	14	SOP	Rectangular		Plastic/Epoxy		7 mV	2 nA	Yes	4	CMOS		800 μA			3 V	3/5 V	Small Outline	SOP14,.25	Comparators	8 V	0.05 in (1.27 mm)	85 °C (185 °F)		640 ns	Open-Drain	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4	30 s	260 °C (500 °F)	0.341 in (8.65 mm)
TLV3604DCKT	Texas Instruments	Comparator	Automotive	Gull Wing	6	TSSOP	Rectangular		Plastic/Epoxy		5 mV	5 uA	Yes	1			17.5 mA			2.5 V		Small Outline, Thin Profile, Shrink Pitch	TSSOP6,.08		5.5 V	0.026 in (0.65 mm)	125 °C (257 °F)	5 uA	0.8 ns		-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G6	1	0.043 in (1.1 mm)	0.049 in (1.25 mm)		e4	30 s	260 °C (500 °F)	0.079 in (2 mm)
LM2901IJ	Texas Instruments	Comparator	Automotive	Through-Hole	14	DIP	Rectangular		Ceramic, Glass-Sealed		15 mV	-500 nA	No	4	BIPOLAR		2.5 mA			5 V		In-Line		Comparators	36 V	0.1 in (2.54 mm)	125 °C (257 °F)		1.3 µs	Open-Collector	-40 °C (-40 °F)		Dual	R-GDIP-T14		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No				0.77 in (19.56 mm)
5962-9452601M2A	Texas Instruments	Comparator	Military	No Lead	20	QCCN	Square		Ceramic, Metal-Sealed Cofired		9 mV	-300 nA	Yes	2		MIL-STD-883				5 V		Chip Carrier		Comparators	36 V		125 °C (257 °F)				-55 °C (-67 °F)		Quad	S-CQCC-N20				No
LM139AN/883B	Texas Instruments	Comparator	Military	Through-Hole	14	DIP	Rectangular		Plastic/Epoxy		4 mV	-300 nA	No	4	BIPOLAR	MIL-STD-883 Class B				5 V		In-Line		Comparators	36 V	0.1 in (2.54 mm)	125 °C (257 °F)		1.3 µs	Open-Collector	-55 °C (-67 °F)		Dual	R-PDIP-T14		0.2 in (5.08 mm)	0.3 in (7.62 mm)					0.76 in (19.305 mm)
TLC374CDBR	Texas Instruments	Comparator	Commercial	Gull Wing	14	SSOP	Rectangular		Plastic/Epoxy		6.5 mV	600 pA	Yes	4	CMOS					5 V		Small Outline, Shrink Pitch		Comparators	18 V	0.026 in (0.65 mm)	70 °C (158 °F)		650 ns	Open-Drain	0 °C (32 °F)	Nickel Palladium Gold	Dual	R-PDSO-G14	2	0.079 in (2 mm)	0.209 in (5.3 mm)	No	e4			0.244 in (6.2 mm)
5962-9688101QHX	Texas Instruments	Comparator	Military	Flat	10	DFP	Square		Ceramic, Glass-Sealed		10 mV	20 nA	Yes	2	CMOS	MIL-PRF-38535 Class Q				3 V		Flatpack		Comparators	8 V	0.05 in (1.27 mm)	125 °C (257 °F)		1.4 µs	Open-Drain	-55 °C (-67 °F)	Tin Lead	Dual	S-GDFP-F10		0.08 in (2.03 mm)	0.245 in (6.225 mm)	No	e0			0.245 in (6.225 mm)
TL3016IPWLE	Texas Instruments	Comparator	Industrial	Gull Wing	8	TSSOP	Rectangular		Plastic/Epoxy	-7 V	3.5 mV	10 uA	Yes	1	BIPOLAR		12.5 mA	-5 V		5 V	5/±5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.25	Comparators	7 V	0.026 in (0.65 mm)	85 °C (185 °F)	7.5 uA	7.8 µs		-40 °C (-40 °F)		Dual	R-PDSO-G8		0.047 in (1.2 mm)	0.118 in (3 mm)	No				0.173 in (4.4 mm)
LM193J/883	Texas Instruments	Comparator	Military	Through-Hole	8	DIP	Rectangular		Ceramic, Glass-Sealed	0 V	9 mV	300 nA	No	2	BIPOLAR	MIL-STD-883	1 mA	0 V	Tube	5 V	5 V	In-Line	DIP8,.3	Comparators	36 V	0.1 in (2.54 mm)	125 °C (257 °F)	100 nA	1.3 µs	Open-Collector, Open-Drain	-55 °C (-67 °F)	Tin/Lead	Dual	R-GDIP-T8	1	0.2 in (5.08 mm)	0.3 in (7.62 mm)	No	e0			0.386 in (9.8 mm)
TLC354IJ	Texas Instruments	Comparator	Industrial	Through-Hole	14	DIP	Rectangular		Ceramic, Glass-Sealed		13 mV	2 nA	No	4	CMOS		800 μA			5 V	5 V	In-Line	DIP14,.3	Comparators	18 V	0.1 in (2.54 mm)	85 °C (185 °F)	2 nA	650 ns	Open-Drain	-40 °C (-40 °F)		Dual	R-GDIP-T14		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No				0.77 in (19.56 mm)
TL721CD	Texas Instruments	Comparator	Commercial	Gull Wing	8	SOP	Rectangular		Plastic/Epoxy				Yes		BIPOLAR							Small Outline	SOP8,.25	Comparators		0.05 in (1.27 mm)	70 °C (158 °F)				0 °C (32 °F)		Dual	R-PDSO-G8				No
TLC352ID	Texas Instruments	Comparator	Industrial	Gull Wing	8	SOP	Rectangular		Plastic/Epoxy	0 V	5 mV	2 nA	Yes	2	CMOS		300 μA	0 V	Tube	5 V	5 V	Small Outline	SOP8,.25	Comparators	18 V	0.05 in (1.27 mm)	85 °C (185 °F)	20 nA	650 ns	Open-Collector	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4	30 s	260 °C (500 °F)	0.193 in (4.9 mm)
LMH7322SQX	Texas Instruments	Comparator	Automotive	No Lead	24	VQCCN	Square		Plastic/Epoxy		8 mV	2.9 uA	Yes	1						5 V		Chip Carrier, Very Thin Profile		Comparators	12 V	0.02 in (0.5 mm)	125 °C (257 °F)		0.783 ns		-40 °C (-40 °F)	Tin Lead	Quad	S-PQCC-N24	2	0.031 in (0.8 mm)	0.157 in (4 mm)	No	e0	30 s	235 °C (455 °F)	0.157 in (4 mm)
5962-01-003-2214	Texas Instruments	Comparator	Commercial	Through-Hole	8	DIP	Rectangular		Plastic/Epoxy				No		BIPOLAR							In-Line	DIP8,.3	Comparators		0.1 in (2.54 mm)	70 °C (158 °F)				0 °C (32 °F)		Dual	R-PDIP-T8				No
5962-9688101QPA	Texas Instruments	Comparator	Military	Through-Hole	8	DIP	Rectangular		Ceramic, Glass-Sealed		5 mV	20 nA	No	2	CMOS	MIL-PRF-38535 Class Q	300 μA		Tube	3 V	3/5 V	In-Line	DIP8,.3	Comparators	8 V	0.1 in (2.54 mm)	125 °C (257 °F)	20 nA	1.4 µs	Open-Collector	-55 °C (-67 °F)	Tin Lead	Dual	R-GDIP-T8		0.2 in (5.08 mm)	0.3 in (7.62 mm)	Yes	e0			0.378 in (9.6 mm)
TLC372CDRG4	Texas Instruments	Comparator	Commercial	Gull Wing	8	SOP	Rectangular		Plastic/Epoxy		6.5 mV	600 pA	Yes	2	CMOS		300 μA		Tape And Reel	5 V	5 V	Small Outline	SOP8,.25	Comparators	18 V	0.05 in (1.27 mm)	70 °C (158 °F)	30 pA	650 ns	Open-Collector	0 °C (32 °F)	Nickel/Palladium/Gold	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4		260 °C (500 °F)	0.193 in (4.9 mm)
LM2903JG/883B	Texas Instruments	Comparator	Industrial	Through-Hole	8	DIP	Rectangular		Ceramic		15 mV		No		BIPOLAR	MIL-STD-883 Class B (Modified)				5 V	5 V	In-Line	DIP8,.3	Comparators		0.1 in (2.54 mm)	85 °C (185 °F)				-40 °C (-40 °F)		Dual	R-XDIP-T8				No

Comparators

Comparators are electronic circuits that compare two input voltages and output a voltage signal that indicates which of the inputs is larger. A comparator is similar to an operational amplifier (op-amp), but it is designed to operate with a limited range of voltage outputs (typically near the power supply rails) and with very high gain.

A comparator typically has two input terminals, a non-inverting (+) input and an inverting (-) input, and one output. When the voltage at the non-inverting input is greater than the voltage at the inverting input, the output of the comparator switches to its maximum positive voltage. Conversely, when the voltage at the inverting input is greater than the voltage at the non-inverting input, the output of the comparator switches to its maximum negative voltage.

Comparators are often used in applications where a precise measurement or detection of voltage level is required, such as in voltage reference circuits, level detectors, and waveform generators. They can also be used to implement digital logic circuits and are frequently used in A/D converters and motor control circuits.

It is worth noting that a comparator output can switch quickly between its high and low states, so they can be sensitive to noise and require careful circuit design to ensure proper operation. In addition, some comparators may include features such as hysteresis, which can help to reduce noise and ensure stable operation in the presence of small fluctuations in the input signals.