Texas Instruments Comparators 2,400+

Reset All

Part	Manufacturer	Amplifier Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Total Dose (V)	Package Body Material	Maximum Negative Supply Voltage Limit	Maximum Input Offset Voltage	Maximum Average Bias Current (IIB)	Surface Mount	No. of Functions	Technology	Screening Level	Maximum Supply Current	Nominal Negative Supply Voltage (Vsup)	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Sub-Category	Maximum Supply Voltage Limit	Terminal Pitch	Maximum Operating Temperature	Maximum Bias Current (IIB) @25C	Nominal Response Time	Output Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length
TL336IJ	Texas Instruments	Comparator	Other	Through-Hole	20	DIP	Rectangular		Ceramic				No		BIPOLAR							In-Line	DIP20,.3	Comparators		0.1 in (2.54 mm)	85 °C (185 °F)				-25 °C (-13 °F)		Dual	R-XDIP-T20				No
PTLV7044PWR	Texas Instruments	Comparator	Automotive	Gull Wing	14	TSSOP	Rectangular		Plastic/Epoxy		8 mV	2 pA	Yes	4			3 μA		Tape And Reel	1.8 V		Small Outline, Thin Profile, Shrink Pitch	TSSOP14,.25	Comparators	7 V	0.026 in (0.65 mm)	125 °C (257 °F)		3 µs	Open-Drain	-40 °C (-40 °F)		Dual	R-PDSO-G14		0.047 in (1.2 mm)	0.173 in (4.4 mm)					0.197 in (5 mm)
LM311JG	Texas Instruments	Comparator	Commercial	Through-Hole	8	DIP	Rectangular		Ceramic, Glass-Sealed		10 mV	300 nA	No	1	BIPOLAR		7.5 mA	-15 V		15 V	±15 V	In-Line	DIP8,.3	Comparators		0.1 in (2.54 mm)	70 °C (158 °F)		115 ns	Open-Collector, Open-Emitter	0 °C (32 °F)		Dual	R-GDIP-T8		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No				0.378 in (9.6 mm)
TLV3012AIDCK	Texas Instruments	Comparator	Automotive	Gull Wing	6	TSSOP	Rectangular		Plastic/Epoxy		12 mV	10 pA	Yes	1	BIPOLAR		5 μA			5 V	2/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP6,.08	Comparators	7 V	0.026 in (0.65 mm)	125 °C (257 °F)	10 pA	13.5 µs	Open-Drain	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G6		0.043 in (1.1 mm)	0.049 in (1.25 mm)	No	e4			0.079 in (2 mm)
LM393D3	Texas Instruments	Comparator	Commercial	Gull Wing	8	SOP	Rectangular		Plastic/Epoxy		9 mV		Yes	2	BIPOLAR					5 V	5 V	Small Outline	SOP8,.25	Comparators		0.05 in (1.27 mm)	70 °C (158 °F)				0 °C (32 °F)		Dual	R-PDSO-G8
LM193H-MLS	Texas Instruments	Comparator	Military	Wire	8		Round		Metal	0 V	9 mV	300 nA	No	2	BIPOLAR			0 V		5 V		Cylindrical		Comparators	36 V		125 °C (257 °F)		1.3 µs	Open-Collector	-55 °C (-67 °F)		Bottom	O-MBCY-W8
TLC3704CDBLE	Texas Instruments	Comparator	Commercial	Gull Wing	14	SSOP	Rectangular		Plastic/Epoxy		6.5 mV	600 pA	Yes	4	CMOS					5 V		Small Outline, Shrink Pitch			18 V	0.026 in (0.65 mm)	70 °C (158 °F)		1.1 µs	Push-Pull	0 °C (32 °F)		Dual	R-PDSO-G14		0.079 in (2 mm)	0.209 in (5.3 mm)	No				0.244 in (6.2 mm)
LM393AJG	Texas Instruments	Comparator	Commercial	Through-Hole	8	DIP	Rectangular		Ceramic, Glass-Sealed		4 mV	400 nA	No	2	BIPOLAR		2.5 mA			5 V	5 V	In-Line	DIP8,.3	Comparators	36 V	0.1 in (2.54 mm)	70 °C (158 °F)	250 nA	1.3 µs	Open-Collector	0 °C (32 °F)		Dual	R-GDIP-T8		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No				0.378 in (9.6 mm)
LP211DG4	Texas Instruments	Comparator	Other	Gull Wing	8	SOP	Rectangular		Plastic/Epoxy	-18 V	10 mV	150 nA	Yes	1				-15 V		15 V	±15 V	Small Outline	SOP8,.25	Comparators	18 V	0.05 in (1.27 mm)	85 °C (185 °F)	100 nA	1.2 µs	Open-Collector, Open-Emitter	-25 °C (-13 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4	30 s	260 °C (500 °F)	0.193 in (4.9 mm)
TLC354ID	Texas Instruments	Comparator	Industrial	Gull Wing	14	SOP	Rectangular		Plastic/Epoxy		5 mV	2 nA	Yes	4	CMOS		600 μA		Tube	5 V	5 V	Small Outline	SOP14,.25	Comparators	18 V	0.05 in (1.27 mm)	85 °C (185 °F)	20 nA	650 ns	Open-Collector	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4	30 s	260 °C (500 °F)	0.341 in (8.65 mm)
TLV3012AIDBV	Texas Instruments	Comparator	Automotive	Gull Wing	6	LSSOP	Rectangular		Plastic/Epoxy		12 mV	10 pA	Yes	1	CMOS					5 V		Small Outline, Low Profile, Shrink Pitch		Comparators	7 V	0.037 in (0.95 mm)	125 °C (257 °F)		12 µs	Push-Pull	-40 °C (-40 °F)		Dual	R-PDSO-G6		0.057 in (1.45 mm)	0.063 in (1.6 mm)					0.114 in (2.9 mm)
LMV7235MWC	Texas Instruments	Comparator	Industrial	No Lead		DIE				0 V	6 mV	400 nA	Yes	1	BIPOLAR			0 V		2.7 V		Uncased Chip		Comparators	5.5 V		85 °C (185 °F)		45 ns	Open-Drain	-40 °C (-40 °F)		Upper	X-XUUC-N				No
LP239N	Texas Instruments	Comparator	Other	Through-Hole	14	DIP	Rectangular		Plastic/Epoxy		9 mV	40 nA	No	4	BIPOLAR		100 μA			5 V	5 V	In-Line	DIP14,.3	Comparators	36 V	0.1 in (2.54 mm)	85 °C (185 °F)	25 nA	1.3 µs	Open-Collector	-25 °C (-13 °F)		Dual	R-PDIP-T14		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No				0.76 in (19.305 mm)
LM306P	Texas Instruments	Comparator	Commercial	Through-Hole	8	DIP	Rectangular		Plastic/Epoxy	-15 V	5 mV	40 uA	No	1	BIPOLAR		10 mA	-12 V	Tube	12 V	12,-3/-12 V	In-Line	DIP8,.3	Comparators	15 V	0.1 in (2.54 mm)	70 °C (158 °F)	25 uA	28 ns	Open-Collector	0 °C (32 °F)	Nickel Palladium Gold	Dual	R-PDIP-T8		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No	e4			0.386 in (9.81 mm)
LM139AFH	Texas Instruments	Comparator	Military	No Lead	20	QCCN	Square		Ceramic		4 mV		Yes	4	BIPOLAR		2 mA			5 V	5 V	Chip Carrier	LCC20,.35SQ	Comparators		0.05 in (1.27 mm)	125 °C (257 °F)		1.3 µs		-55 °C (-67 °F)		Quad	S-XQCC-N20				No
5962R9673802VCA	Texas Instruments	Comparator	Military	Through-Hole		DIP	Rectangular	100k Rad(Si)	Ceramic, Glass-Sealed	0 V	4 mV	-1 nA	No	4	BIPOLAR	MIL-PRF-38535 Class V	2 mA	0 V		5 V		In-Line		Comparators	36 V	0.1 in (2.54 mm)	125 °C (257 °F)	100 nA		Open-Collector, Open-Drain	-55 °C (-67 °F)	Tin/Lead	Dual	R-GDIP-T14	1	0.2 in (5.08 mm)	0.3 in (7.62 mm)	Yes	e0			0.785 in (19.94 mm)
LM360N	Texas Instruments	Comparator	Commercial	Through-Hole	8	DIP	Rectangular		Plastic/Epoxy	-8 V	5 mV	20 uA	No	1	BIPOLAR			-5 V		5 V		In-Line		Comparators	8 V	0.1 in (2.54 mm)	70 °C (158 °F)		14 ns	Open-Collector	0 °C (32 °F)		Dual	R-PDIP-T8		0.2 in (5.08 mm)	0.3 in (7.62 mm)					0.386 in (9.817 mm)
TL720CN/P3	Texas Instruments	Comparator	Commercial	Through-Hole	14	DIP	Rectangular		Plastic/Epoxy				No		BIPOLAR							In-Line	DIP14,.3	Comparators		0.1 in (2.54 mm)	70 °C (158 °F)				0 °C (32 °F)		Dual	R-PDIP-T14
TLC372Y	Texas Instruments	Comparator	Commercial	No Lead	8	DIE	Rectangular				5 mV		Yes	2	CMOS					5 V		Uncased Chip			18 V		70 °C (158 °F)		650 ns	Open-Drain	0 °C (32 °F)		Upper	R-XUUC-N8				No
TLV3494AIPWRG4	Texas Instruments	Comparator	Automotive	Gull Wing	14	TSSOP	Rectangular		Plastic/Epoxy		15 mV	10 pA	Yes	4	CMOS		1.2 μA			5 V	2/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP14,.25	Comparators	5.5 V	0.026 in (0.65 mm)	125 °C (257 °F)	10 pA	12 µs	Push-Pull	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G14	2	0.047 in (1.2 mm)	0.173 in (4.4 mm)	No	e4	30 s	260 °C (500 °F)	0.197 in (5 mm)
LM361MX	Texas Instruments	Comparator	Commercial	Gull Wing	14	SOP	Rectangular		Plastic/Epoxy	-16 V	5 mV	30 pA	Yes	1	BIPOLAR			-10 V		10 V	5,±10 V	Small Outline	SOP14,.25	Comparators	16 V	0.05 in (1.27 mm)	70 °C (158 °F)	30 pA	14 ns	Totem Pole	0 °C (32 °F)	Tin Lead	Dual	R-PDSO-G14	1	0.069 in (1.753 mm)	0.154 in (3.9 mm)	No	e0	20 s	235 °C (455 °F)	0.34 in (8.6235 mm)
TLV7211AIDCKRG4	Texas Instruments	Comparator	Industrial	Gull Wing	6	TSSOP	Rectangular		Plastic/Epoxy	0 V	8 mV		Yes	1	CMOS		14 μA	0 V		5 V	3/15 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP6,.08	Comparators	16 V	0.026 in (0.65 mm)	85 °C (185 °F)		10 µs	Push-Pull	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G6	1	0.043 in (1.1 mm)	0.049 in (1.25 mm)	No	e4	30 s	260 °C (500 °F)	0.079 in (2 mm)
TLC393CPSR	Texas Instruments	Comparator	Commercial	Gull Wing	8	SOP	Rectangular		Plastic/Epoxy		5 mV	600 pA	Yes	2	CMOS		40 μA		Tape And Reel	5 V	5 V	Small Outline	SOP8,.3	Comparators	18 V	0.05 in (1.27 mm)	70 °C (158 °F)	2 pA	2.5 µs	Open-Collector	0 °C (32 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.079 in (2 mm)	0.209 in (5.3 mm)	No	e4	30 s	260 °C (500 °F)	0.244 in (6.2 mm)
TLV2352IP	Texas Instruments	Comparator	Industrial	Through-Hole	8	DIP	Rectangular		Plastic/Epoxy		5 mV	2 nA	No	2	CMOS		300 μA		Tube	3 V	3/5 V	In-Line	DIP8,.3	Comparators	8 V	0.1 in (2.54 mm)	85 °C (185 °F)	2 nA	640 ns	Open-Collector	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDIP-T8		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No	e4			0.386 in (9.81 mm)
TL710CJG	Texas Instruments	Comparator	Commercial	Through-Hole	8	DIP	Rectangular		Ceramic				No		BIPOLAR							In-Line	DIP8,.3	Comparators		0.1 in (2.54 mm)	70 °C (158 °F)				0 °C (32 °F)		Dual	R-XDIP-T8				No
LMV331DCKRLE	Texas Instruments	Comparator	Industrial	Gull Wing	5	TSSOP	Rectangular		Plastic/Epoxy		7 mV	400 nA	Yes	1						2.7 V		Small Outline, Thin Profile, Shrink Pitch	TSSOP5/6,.08		5.5 V	0.026 in (0.65 mm)	85 °C (185 °F)		400 ns		-40 °C (-40 °F)		Dual	R-PDSO-G5		0.043 in (1.1 mm)	0.049 in (1.25 mm)	No				0.079 in (2 mm)
5962-9688101Q2A	Texas Instruments	Comparator	Military	No Lead	20	QCCN	Square		Ceramic, Metal-Sealed Cofired		10 mV	20 nA	Yes	2	CMOS	MIL-PRF-38535 Class Q	400 μA			3 V	3/5 V	Chip Carrier	LCC20,.35SQ	Comparators	8 V	0.05 in (1.27 mm)	125 °C (257 °F)	20 nA	1.4 µs	Open-Drain	-55 °C (-67 °F)		Quad	S-CQCC-N20		0.08 in (2.03 mm)	0.35 in (8.89 mm)	No				0.35 in (8.89 mm)
SN52711J	Texas Instruments	Comparator	Military	Through-Hole	14	DIP	Rectangular		Ceramic				No	2	BIPOLAR						12,-6 V	In-Line	DIP14,.3	Comparators		0.1 in (2.54 mm)	125 °C (257 °F)				-55 °C (-67 °F)		Dual	R-XDIP-T14				No
TLV7012DSGR	Texas Instruments	Comparator	Automotive	No Lead	8	HVSON	Square		Plastic/Epoxy		8 mV	2 pA	Yes	2			18 μA		Tape And Reel	5 V		Small Outline, Heat Sink/Slug, Very Thin Profile	SOLCC8,.08,20	Comparators	7 V	0.02 in (0.5 mm)	125 °C (257 °F)	2 pA	260 ns	Push-Pull	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	S-PDSO-N8	1	0.031 in (0.8 mm)	0.079 in (2 mm)		e4	30 s	260 °C (500 °F)	0.079 in (2 mm)
5962-8765801PX	Texas Instruments	Comparator	Military	Through-Hole	8	DIP	Rectangular		Ceramic, Glass-Sealed		10 mV	20 nA	No	2	CMOS	MIL-STD-883	750 μA			5 V		In-Line		Comparators	18 V	0.1 in (2.54 mm)	125 °C (257 °F)		650 ns	Open-Drain	-55 °C (-67 °F)	Tin Lead	Dual	R-GDIP-T8		0.2 in (5.08 mm)	0.3 in (7.62 mm)	Yes	e0			0.378 in (9.6 mm)
TL514MJB	Texas Instruments	Comparator	Military	Through-Hole	14	DIP	Rectangular		Ceramic				No		BIPOLAR	38535Q/M;38534H;883B						In-Line	DIP14,.3	Comparators		0.1 in (2.54 mm)	125 °C (257 °F)				-55 °C (-67 °F)		Dual	R-XDIP-T14				No
77008012A	Texas Instruments	Comparator	Military	No Lead	20	QCCN	Square		Ceramic, Metal-Sealed Cofired		9 mV	-300 nA	Yes	4	BIPOLAR	MIL-STD-883	3 mA		Tube	5 V	5/30 V	Chip Carrier	DIP14,.3	Comparators	36 V	0.05 in (1.27 mm)	125 °C (257 °F)	100 nA	1.3 µs	Open-Collector, Open-Drain	-55 °C (-67 °F)	Tin Lead	Quad	S-CQCC-N20		0.08 in (2.03 mm)	0.35 in (8.89 mm)	Yes	e0			0.35 in (8.89 mm)
TLC374CN-A	Texas Instruments	Comparator	Commercial	Through-Hole	14	DIP	Rectangular		Plastic/Epoxy		6.5 mV	600 pA	No	4	CMOS		600 μA		Tube	5 V	5 V	In-Line	DIP14,.3	Comparators	18 V	0.1 in (2.54 mm)	70 °C (158 °F)	30 pA	650 ns	Open-Collector	0 °C (32 °F)	Nickel/Palladium/Gold	Dual	R-PDIP-T14		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No	e4			0.76 in (19.305 mm)
TLV3702IPE4	Texas Instruments	Comparator	Automotive	Through-Hole	8	DIP	Rectangular		Plastic/Epoxy	0 V	7 mV	1.5 nA	No	2	CMOS		2 μA	0 V		5 V	±1.35/±8/2.7/16 V	In-Line	DIP8,.3	Comparators	17 V	0.1 in (2.54 mm)	125 °C (257 °F)	250 pA	240 µs	Push-Pull	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDIP-T8		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No	e4			0.386 in (9.81 mm)
LM339X2DBLE	Texas Instruments	Comparator	Commercial	Gull Wing	30	SSOP	Rectangular		Plastic/Epoxy		9 mV	-400 nA	Yes	8	BIPOLAR		5 mA			5 V	5 V	Small Outline, Shrink Pitch	SSOP30,.3	Comparators	36 V	0.026 in (0.65 mm)	70 °C (158 °F)	250 nA	1.3 ns	Open-Collector	0 °C (32 °F)		Dual	R-PDSO-G30		0.079 in (2 mm)	0.209 in (5.3 mm)	No				0.402 in (10.2 mm)
LP239D	Texas Instruments	Comparator	Other	Gull Wing	14	SOP	Rectangular		Plastic/Epoxy		9 mV	40 nA	Yes	4	BIPOLAR		100 μA			5 V	5 V	Small Outline	SOP14,.25	Comparators	36 V	0.05 in (1.27 mm)	85 °C (185 °F)	25 nA	1.3 µs	Open-Collector	-25 °C (-13 °F)		Dual	R-PDSO-G14		0.069 in (1.75 mm)	0.154 in (3.9 mm)	No				0.341 in (8.65 mm)
TLC339MDR	Texas Instruments	Comparator	Military	Gull Wing	14	SOP	Rectangular		Plastic/Epoxy		10 mV	30 nA	Yes	4	CMOS		80 μA		Tape And Reel	5 V	5 V	Small Outline	SOP14,.25	Comparators	18 V	0.05 in (1.27 mm)	125 °C (257 °F)	2 pA	2.5 µs	Open-Collector	-55 °C (-67 °F)	Nickel/Palladium/Gold	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4		260 °C (500 °F)	0.341 in (8.65 mm)
LM2901J	Texas Instruments	Comparator	Automotive	Through-Hole	14	DIP	Rectangular		Ceramic		15 mV		No		BIPOLAR		2.5 mA			5 V	5 V	In-Line	DIP14,.3	Comparators		0.1 in (2.54 mm)	125 °C (257 °F)	250 nA	1.3 µs		-40 °C (-40 °F)		Dual	R-XDIP-T14				No
TL514MJ	Texas Instruments	Comparator	Military	Through-Hole	14	DIP	Rectangular		Ceramic, Glass-Sealed		3 mV	15 uA	No	2	BIPOLAR		18 mA	-6 V		12 V		In-Line	DIP14,.3	Comparators		0.1 in (2.54 mm)	125 °C (257 °F)		30 ns	Totem Pole	-55 °C (-67 °F)		Dual	R-GDIP-T14		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No				0.77 in (19.56 mm)
TLC139MDR	Texas Instruments	Comparator	Military	Gull Wing	14	SOP	Rectangular		Plastic/Epoxy		10 mV	30 nA	Yes	4	CMOS		175 μA			5 V		Small Outline			18 V	0.05 in (1.27 mm)	125 °C (257 °F)		2.5 µs	Open-Drain	-55 °C (-67 °F)		Dual	R-PDSO-G14		0.069 in (1.75 mm)	0.154 in (3.9 mm)	No				0.341 in (8.65 mm)
LM239DE4	Texas Instruments	Comparator	Other	Gull Wing	14	SOP	Rectangular		Plastic/Epoxy		5 mV	400 nA	Yes	4	BIPOLAR		2 mA		Tube	5 V	5 V	Small Outline	SOP14,.24	Comparators	36 V	0.05 in (1.27 mm)	85 °C (185 °F)	250 nA	1.3 µs	Open-Collector	-25 °C (-13 °F)	Nickel Palladium Gold	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4	30 s	260 °C (500 °F)	0.341 in (8.65 mm)
LM211U	Texas Instruments	Comparator	Other	Flat	10	DFP	Rectangular		Ceramic		4 mV		Yes		BIPOLAR			-15 V		15 V	±15 V	Flatpack	FL10,.3	Comparators		0.05 in (1.27 mm)	85 °C (185 °F)				-25 °C (-13 °F)		Dual	R-XDFP-F10				No
TL331CD3	Texas Instruments	Comparator	Commercial	Gull Wing	8	SOP	Rectangular		Plastic/Epoxy				Yes		BIPOLAR						5/30 V	Small Outline	SOP8,.25	Comparators		0.05 in (1.27 mm)	70 °C (158 °F)				0 °C (32 °F)		Dual	R-PDSO-G8
TLC352IDRG4	Texas Instruments	Comparator	Industrial	Gull Wing	8	SOP	Rectangular		Plastic/Epoxy	0 V	5 mV	2 nA	Yes	2	CMOS		300 μA	0 V	Tape And Reel	5 V	5 V	Small Outline	SOP8,.25	Comparators	18 V	0.05 in (1.27 mm)	85 °C (185 °F)	20 nA	650 ns	Open-Collector	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4	30 s	260 °C (500 °F)	0.193 in (4.9 mm)
TLC371CDR	Texas Instruments	Comparator	Commercial	Gull Wing	8	SOP	Rectangular		Plastic/Epoxy		6.5 mV	600 pA	Yes	1	CMOS		200 μA			5 V		Small Outline			18 V	0.05 in (1.27 mm)	70 °C (158 °F)		650 ns	Open-Drain	0 °C (32 °F)		Dual	R-PDSO-G8		0.069 in (1.75 mm)	0.154 in (3.9 mm)	No				0.193 in (4.9 mm)
JL111BPA	Texas Instruments	Comparator	Military	Through-Hole	8	DIP	Rectangular		Ceramic, Glass-Sealed	-30 V	3 mV	100 pA	No	1	BIPOLAR	MIL-STD-883		-15 V		15 V		In-Line		Comparators	30 V	0.1 in (2.54 mm)	125 °C (257 °F)		640 ns	Open-Collector	-55 °C (-67 °F)		Dual	R-GDIP-T8		0.2 in (5.08 mm)	0.3 in (7.62 mm)					0.4 in (10.16 mm)
LM361M/NOPB	Texas Instruments	Comparator	Commercial	Gull Wing	14	SOP	Rectangular		Plastic/Epoxy	-16 V	5 mV	30 uA	Yes	1	BIPOLAR		20 mA	-10 V	Tube	10 V	5,±10 V	Small Outline	SOP14,.25	Comparators	16 V	0.05 in (1.27 mm)	70 °C (158 °F)	30 uA	14 ns		0 °C (32 °F)	Matte Tin	Dual	R-PDSO-G14	1	0.069 in (1.753 mm)	0.154 in (3.9 mm)	No	e3		260 °C (500 °F)	0.34 in (8.6235 mm)
UA710MJB	Texas Instruments	Comparator	Military	Through-Hole	14	DIP	Rectangular		Ceramic				No		BIPOLAR	38535Q/M;38534H;883B					12,-6 V	In-Line	DIP14,.3	Comparators		0.1 in (2.54 mm)	125 °C (257 °F)				-55 °C (-67 °F)		Dual	R-XDIP-T14				No

Comparators

Comparators are electronic circuits that compare two input voltages and output a voltage signal that indicates which of the inputs is larger. A comparator is similar to an operational amplifier (op-amp), but it is designed to operate with a limited range of voltage outputs (typically near the power supply rails) and with very high gain.

A comparator typically has two input terminals, a non-inverting (+) input and an inverting (-) input, and one output. When the voltage at the non-inverting input is greater than the voltage at the inverting input, the output of the comparator switches to its maximum positive voltage. Conversely, when the voltage at the inverting input is greater than the voltage at the non-inverting input, the output of the comparator switches to its maximum negative voltage.

Comparators are often used in applications where a precise measurement or detection of voltage level is required, such as in voltage reference circuits, level detectors, and waveform generators. They can also be used to implement digital logic circuits and are frequently used in A/D converters and motor control circuits.

It is worth noting that a comparator output can switch quickly between its high and low states, so they can be sensitive to noise and require careful circuit design to ensure proper operation. In addition, some comparators may include features such as hysteresis, which can help to reduce noise and ensure stable operation in the presence of small fluctuations in the input signals.